Honda Car Trim Clips, Fixings & Fasteners

These are one of the best selling Honda equivalent clips. They are widely used across the Honda range as bumper clips, splashguard clips, side skir...

Extremely common Honda clip used on wheel arch linings and radiator grilles. The 8mm clip is a simple push rivet and replaces an 8mm screw rivet on...

These are used on several Honda models to attach bumpers, side skirts, radiator grilles and underbody shields. The clips are a simple 10mm push fit...

These small clips are used on the front and rear wheel arch of the 8th generation Honda Civic (2005-2011) and the 3rd generation Honda CR-V (2007-2...

These clips have a metal spring loaded into the mechanism which helps to hold the clip firmly in place when they are fitted. The clips are very str...

These 6mm trim clips are used rarely on Honda cars but are far more common on their motorcycles and ATVs. The clips are used for attaching fairings...

Common on several cars produced by Honda, these 8mm push fit clips are normally used to hold wheel arch linings and splashguards in place.

Used on a large number of Honda and Acura vehicles for attaching bumpers, side skirts, engine undertrays and splash shields. The clips fit into a 1...

These are extremely common on most modern Honda cars. It's a standard 10mm push fit plastic rivet that is used to fasten larger trim panels and shi...

Used on a number of different Honda cars, these clips are often fitted to wheel arch linings, engine shields, underbody panels, radiator grilles an...

These are used on a few different Honda models. In particular they are the clips used to attach the side skirts to the EP3 Civic Type-R. They are d...

These black metal screws are the most common size used by Honda to secure wheel arch linings and splashguards. The screws are high quality parts id...

These small, white screw grommets are used around the vehicle for fastening trim panels and parts to the bodywork. The grommet fits into the bodywo...

These black fir tree clips are common on lots of Honda models but do originally come in a wide range of colours. These are black, fit into a 7mm ho...

This clips have two part numbers from Honda. 75315STKA01 and 75315S9A004. The clips are used on exterior body and door mouldings.

A standard 8mm push fit plastic rivet used for attaching interior and exterior trim panels such as wheel arch linings, boot linings, engine bay shi...

These green plastic trim clips are used on many modern Honda cars since about 2010. The clips are used for attaching interior trim panels such as d...

These are a high quality alternative to the genuine Honda parts. These green rubber seal clips are used to attach the rubber door seals or weathers...

These yellow v-shaped trim fasteners are used to attach the wheel arch trim in place on some models of Civic, CRV and HRV. The clip is likely to sn...

These small black clips are used on some Honda models to attach the plastic trims that run around the edges of the wheel arch. This clip has Honda ...

Simple push plugs used to hold wheel arch linings or splashguards in place on several Honda models. These fasteners simply push in to click in place.

This clips is used on most Honda cars since around 2000 and is still fitted on new models now. These are used to attach trim panels and covers norm...

These clips are used by Honda on a wide range of car and bike models and a wide number of parts. They are found on engine bay shields, radiator cow...

These simple push fit clips are normally used to attach the windscreen cowl that runs along the bottom of the windscreen and covers the windscreen ...

These clips come from Honda in white or orange. Our versions are white but they are otherwise identical. The clip is a high quality aftermarket alt...

These are used on the several recent Honda cars including the Civic and Jazz. They are fitted to attach the side skirts or plastic sill covers that...

These are short length push fit plastic rivets used on several Honda cars. The clips are normally used for securing thin panels such as arch lining...

These white clips are normally used to attach exterior trim panels to the rear tailgate on some Honda cars. The clips are typically used on the str...

These are used on many different Honda models for attaching interior trim panels. They hold door cards, interior pillar covers, rear quarter panel ...

These are a large screw fit plastic clip that is widely used on older Honda cars. They are used on bumpers, side skirts, sill mouldings, undertrays...

These round headed, plastic button clips push through the rubber seals at the front and rear of the bonnet to fix them in place. They are used on s...

These simple push fit button clips are used to fasten rubber seals in position. The clips are normally used on the rubbers that run along the edges...

Common Honda bonnet insulation fastener used across many of their range of cars.

This is another common interior trim panel clips. It's used on some modern versions of the Accord, Jazz and CR-V. The parts are typically used as d...

These two part, push to fit clips are used the secure the A-pillar interior trim on several Honda models. The clip is a special design that secures...

This is a distinctive looking clip with an almost semi circular head. The clip is used by Honda on a number of different cars to attach the windscr...

These take an M4 screw and fit into an 8mm square hole. They are a good universal part used to fasten parts or trims to metal bodywork. This partic...

A common and widely used interior trim panel clip. These fasteners are used by Honda to secure items such as tailgate linings, pillar covers, door ...

These white trim panel clips are used on some Honda models, normally to attach door sill cover mouldings. They have also been used to attach trim p...

These little round push button clips are used to secure rubber weather strips and seals in position. They are normally used by Honda on the seals t...

These push fit plastic rivets are used to attach the windscreen cowl trim on some Honda vehicles. The clip is a normal push fit rivet which clicks ...

These are the upper clips used to attach side skirts or sill moulding covers to several different Honda vehicles. Each clip includes the foam seali...

These light blue clips are used on interior pillars, boot linings and some door cards across various Honda models.All of our parts are high quality...

These parts are used to fasten the fabric sound deadening to the underside of the bonnet on several different Honda models.

These are a universal part very common on a wide range of models. The clip fits into a 5mm hole in the bodywork, while the longer canoe-shaped head...

These 8mm clips are used on the CR-V (02-06), the Prelude (96-01) and some models of the Odyssey and the Shuttle. They are normally used for the pl...

These are distinctive clips used to fasten bonnet or hood insulation panels. They simply push through and click into place to secure the fabric ins...

These wide collared parts are used by Honda to secure the underbody trim covers, shields and insulation onto many of their modern vehicles. The cli...