Toyota Car & Van Trim Clips, Fixings & Fasteners

This type of clip is normally used on larger exterior panels such as bumpers, side skirts and radiator grilles. They are extremely common on Toyota...

This clip pushes into an 8mm square hole and is normally used to hold flexible panels such as wheel arch linings and splash guards. The centre hole...

These are one of our best-selling Toyota clips. They are used on lots of different Toyota and Lexus models. Often used for engine bay shields, the ...

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Toyota models. They are used on several models normall...

These tiny push fit plastic rivets are used on interior trims, bumpers, radiator grilles and for some shields on Toyota vehicles. They are also an ...

These are common undertray, splash shield and wheel arch lining clips used on several modern Toyota models. The are used on the latest RAV4 as well...

These screws are common on Toyota cars and vans. The screws are often used on the wheel arch linings or splashguards. The screws have a captive was...

There are several Toyota clips that all look quite similar to these. It's important to check the measurements and part number before you order. Eac...

These are used on many different Toyota and Lexus models. The clips are normally used on engine bay shields or engine covers.

These are used on many different Toyota models to attach bonnet insulations, upholstery and trims. The plastic trim clip has an overall diameter of...

Some models use a lot of these clips to attach the plastic protective mouldings that are fitted to the sides of the vehicles. There are normally a ...

This interior trim panel clip is widely used by Japanese manufacturers. The clips are normally used on door cards but will also be found on boot li...

Some models use a lot of these clips to attach the plastic protective mouldings that are fitted to the sides of the vehicles. There are normally a ...

These plastic rivets fit into a 7mm hole. They are used on some Toyota vehicle to attach parts such as bumpers, wheel arch linings and underbody sh...

These plastic nuts are used to join the edges of two panels. They are commonly used by Toyota to join the wheel arch lining to the edge of the whee...

These short clips are normally used for fastening bumpers, grilles, sill moulding trims and radiator covers in place. The clips have a mottled fini...

A two-part clip that is used to attach the wheel arch lining to the wing on models including the Toyota IQ, RAV4, Previa and some models of the Ave...

This clip is widely used by Toyota. It has been for the last 30 years and continues to appear on new models. It can be found in a variety of locati...

These plastic clips are used to attach rubber weatherstrip seals around apertures on the vehicle. The large head of the clip fits into a hole in th...

This part is used for attaching exterior body moulding trim to several Toyota vehicles. The Toyota part number is 75397-35010 or 75395-35070 (witho...

A standard hidden trim clip suitable for mounting panels such as door cards, tailgate linings and pillar trims. Each clip comes with a sealing wash...

This expanding plastic rivet is used on the Toyota GT-86 to attach parts such as the bumpers, under trays, wheel arches and some interior trim pane...

These clips fit into a 7mm hole. They simply push into the hole and expand to lock in position when the centre pin is inserted. This clip is used b...

Plastic clip that is used to retain shields and linings normally around the wheel arches. The clips can also be used as screw grommets and so are o...

These plastic lock nuts, lokuts or screw grommets fit into a square 9mm x 9mm hole. Each one includes a foam sealing washer. They are identical to ...

These clips have a 7.7mm diameter shaft and are used in the wheel arch lining on some Toyota models including the GT86. The clip is an expanding pu...

This distinctive clip is one of many different coloured body moulding clips used by Toyota. The wide range of clips are all different sizes or with...

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Toyota models. They are used on several models normall...

These are fitted to many different Toyota cars and vans. They are used on bumpers, side skirts, radiator grilles, spoilers, undertrays and engine s...

This small screw fit plastic rivet fits into a 5mm hole and is used on many different Toyota cars. The clip is normally used for small trim panels ...

These are a 7mm standard push fit rivet that expands and locks when the centre pin is pushed in. They are used on several different Toyota models i...

These plugs are used on the underside of side skirts and sill covers fitted to many different Toyota models including some versions of the RAV4, La...

These are used on many Toyota models to secure small or lightweight trim panels such as windscreen cowls, pillar trim covers, boot lining panels an...

These small expanding plastic fasteners are used to accurately secure lightweight trim panels or corner pieces. They are used on parts such as bump...

These 8mm plastic trim clips are typically used to attach wheel arch lining, bumpers, grilles and underbody shields. The clip is a plastic rivet th...

Most often used by Toyota on wheel arch linings and shields, these clips are just a simple plastic rivet that can be used on all sorts of trims ins...

These distinctive blue moulding clips are fitted to several newer Toyota vehicles including the Mk3 Yaris, C-HR and the Mk3 RAV4. They are common o...

This parts are common on several models of the Yaris to secure the undertray and bumper. They are also used on some Lexus models and are interchang...

These plastic rivets are a replacement for Toyota part number 90467-09227. The clip has a grey centre pin and they are normally used on the undersi...

These small clips are used along the inner edge of the bonnet tip or base to attach the rubber seal. They are used on a number of different Toyota ...

These white fasteners are used to secure the bumper alignment. They can often be snapped in a collision or become brittle as they age. They are an ...

A standard push fit expanding plastic rivet which can be used for interior trim panels, dashboards, boot linings etc. The clip is used on many diff...

This trim panel clip is very widely used by Toyota on interior trim panels such as the pillar trims, sill mouldings and boot linings.

These clips are extremely common across the Toyota range. The clips are normally used around the edges of the wheel arch. They mount onto the wing ...

These are a standard screw grommet used to attach parts or trims onto metal bodywork without having to screw directly into the metal.

These little clips are used to attach the rubber seal strip that runs along the top of the radiator grille near the bonnet catch. The strip reduces...

These are used on a number of different Toyota cars from the Auris to the Avensis and up the Lexus LFA. They can be used in many different location...

One of many clips used for attaching the side mouldings and trims on to various Toyota models including the Land Cruiser Prado. There are a lot of ...