Land Rover Car Trim Clips, Fixings and Fasteners

These clips are used across the Land Rover range to attach side skirts, radiator grilles, bumpers, undertrays and wheel arch linings. The clips are...

These clips are used on lots of different Land Rover vehicles from the MK2 Discovery up to the current Range Rovers. They are typically used as whe...

These distinctive, two part plastic clips are used to attach exterior plastic mouldings onto a number of different models produced by Land Rover. T...

These trim panel clips are used on a lot of Land Rover and Range Rover models. The clips are used to attach door cards, tailgate linings, pillar tr...

These blue clips are used to attach the plastic trims that run around the edges of the wheel arches on the MK1 Range Rover Evoque.

These clips push to fit and are easily released with a quarter turn of the head. For this reason they are often used for access panels around the e...

Used on several models, including the new Defender, these grey plastic trim clips are used to attach exterior trim such as the lower door moulding ...

These black fir tree clips are used on all models of the Land Rover Defender from 1987 onwards. They are used as the bumper end cap clips and also ...

These 6mm plastic trim clips are a perfect replacement for the Land Rover clips used to attach the plastic wheel arch flare or spat on the Defende...

These grey fir tree clips are a perfect for for the headlining of the Land Rover Defender, P38 Range Rover and Discovery 1 and 2. We also have them...

These twist lock clips are used to attach the tow eye covers on some Land Rover and Range Rover vehicles. The clips twist to lock the cover in plac...

These are used on many different Land Rover models including the Freelander and some Range Rover models. The clip has a number of different uses an...

Used to fit exterior body mouldings on several different Range Rover models. The clips are normally used on side skirts, sill covers or plastic doo...

These small white plastic clips are used on the side mouldings and body trims fitted to some Land Rover models. In particular they are fitted to th...

These are a long stemmed fir tree clip and normally used for interior trims and panels in off road and commercial vehicles. They are used on a numb...

This small black plastic fastener is used on some of the lower door mouldings, wheel arch trims, sill covers and rear window trims. The clip is fou...

These black plastic expanding trim clips fit into a 7mm hole and the clip locks in position when the head is pushed down. The larger 25mm domed hea...

Small, white plastic clips that are used to attach small trim pieces and fascia covers in position. The clip fits onto a lug on a plastic trim piec...

A common and distinctive red plastic expanding nut used on the Land Rover Defender and many of the more modern Land Rover vehicles. The clip can be...

This is common clip across the Land Rover range and is used for a wide range of purposes. The 8mm plastic rivet is found on bumpers, wheel arch lin...

Interior trim clips used on items such as pillar covers, roof linings and boot trim covers.

This is a quarter turn clip that holds trim covers in place on a number of different Range Rover and Land Rover models. The clip pushes in and twis...

There are lots of variations of the Land Rover Defender but these clips were used quite consistently to mount the interior door trim panels from 19...

Screw fit plastic fasteners that are fitted to several Land Rover vehicles including the Freelander and Range Rover Sport. They are typically used ...

This snapsac insert is used in conjunction with a number of other parts on Land Rover and Range Rover vehicles. The snapsac is pushed into the meta...

This part is identical to a BMW part and is used on a range of different models. It is also a suitable alternative for Land Rover part number EKM10...

These yellow clips come pre fitted with the foam sealing washers. They are used on the several Land Rover and Range Rover models. The clip is used ...

These were used by Land Rover to fit Defender interior trim panels. They are a basic fir tree clip and so will also be suitable for other purposes.

These distinctive clips are used to attach the A-Pillar trims that fit either side of the windscreen on the exterior of certain Land Rover and Rang...

These plastic nuts are used on some Land Rover vehicles to hold the splashguards or wheel arch linings in position. The 10mm nuts are unthreaded an...

These clips are used with a snapsac grommet that fits into the bodywork. They are fitted to at least four different Land Rover vehicles and used to...

These fir tree clips fit perfectly in Land Rover Defender headlinings. If the headlining is recovered or insulated and you need longer clips, these...

This kit of 10 clips contains the parts required to repair or refit the A-pillar trim that runs down the side of the windscreen on some Land Rover ...

These clips squeeze together and then expand when released to hold firm. The clips are used on many modern Land Rover and Range Rover models to sec...

This part is used with the twist lock bolt (FCP0755) that holds the two covers in place on the front and rear bumpers. These covers hide either the...

Used for a range of interior trim panels such as the pillar covers, headlining and tailgate trim covers. Each clip includes a pre-fitted sealing wa...

These plastic fasteners are used to secure brake lines in position. The clip connects the brake line to the chassis. This type of clip is used on s...

These black plastic fasteners are used to attach the front wheel arch trims on the Land Rover Discovery 3 and Discovery 4.

Interior trim panel clips used on the Discovery Mk1 and Mk2. These clips work with a snapsac which fits into the metal bodywork. These are specific...

Each of these screw grommets includes a sealing washer. The clips are typically used to attach exterior trim panels in position. An example of this...

A simple trim panel clip that is used to mount interior trim panels to some Land Rover vehicles.

These are simple plastic fasteners fitted by Land Rover to keep the splashguards in place on the front wheel arches of the MK2 Land Rover Discovery.

This small plastic clip is used on several Land Rover models to secure the insulation to the underside of the bonnet.

Used to attach the A-pillar plastic mouldings on the exterior of the car next to the windscreen. The clips come fitted with the foam sealing washers.

These clips are used on the Land Rover Discovery mk2 to attach rear bumper trims but they are also used on the Freelander mk1 to attach the tailgat...

These clips are a good alternative to the Land Rover part number YOO5098. The clip is used by Land Rover to attach windscreen cowls and interior tr...

These clips are used on many different Land Rover and Range Rover models. The plastic clips are used to secure the front grille.

These small and distinctive plastic clips are used along the top of the bumpers on some Land Rover models. The clip acts as a captive nut for attac...