Skip to content

8mm Plastic Rivet Trim Clips for Bumpers, Splashguards & Wheelarch Liner- Mitsubishi MU000319 MU000705

SKU: FCP-0248-MT1

• Simple 8mm push fit plastic rivets

• Do not require tools to fit

• High quality OE equivalent parts

Original price €0
Original price €5,95 - Original price €15,95
Original price
Current price €5,95
€5,95 - €15,95
Current price €5,95
Title: Pack of 10
A standard 8mm push fit plastic rivet that is used on several models made by Mitsubishi. These plastic fasteners are used on arch linings, mudguards, side skirts and engine shields. They are particularly common on the Colt, Pajero, Shogun and L200.

MitsubishiMitsubishi Part Number: MU000705MU000319

Hole Size: 8mm

Colour: Black

Front Grille or Slam Panel, Underbody Shields and Insulation Panel Fastener, Front Wheel Arch Lining and Mudguard, Rear Bumper and Trim Fastener, Front Bumper and Trim Fastener, Rear Wheel Arch Lining and Mudguard

You may also like

Plastic Screw Fit Spreader Clip- Wheel Arch Linings, Trims & Bumpers- Mitsubishi MB547806

Original price €5,95 - Original price €14,95
Original price
€5,95 - €14,95
€5,95 - €14,95
Current price €5,95

Plastic screw fit rivets that expand when the centre pin is pushed or screwed in. This clip has a mottled patterned head and is used on several old...

View full details
Original price €5,95 - Original price €14,95
Original price
€5,95 - €14,95
€5,95 - €14,95
Current price €5,95

8mm Plastic Rivet- Mitsubishi Bumper & Wheel Arch Lining Clips, MU001623

Original price €5,95 - Original price €15,95
Original price
€5,95 - €15,95
€5,95 - €15,95
Current price €5,95

These simple, push fit plastic rivets require no tools to fit. They simply expand to lock in position when the centre pin is inserted. These clips ...

View full details
Original price €5,95 - Original price €15,95
Original price
€5,95 - €15,95
€5,95 - €15,95
Current price €5,95

6mm Screw Fit Plastic Trim Fastener, Mitsubishi MR215510

Original price €5,95 - Original price €15,95
Original price
€5,95 - €15,95
€5,95 - €15,95
Current price €5,95

The small 6mm fasteners are suitable for securing lightweight trim covers. Mitsubishi use these clips on some of their vehicles to secure the winds...

View full details
Original price €5,95 - Original price €15,95
Original price
€5,95 - €15,95
€5,95 - €15,95
Current price €5,95

8mm Plastic Rivet Trim Clips for Bumpers Splashguards- Mitsubishi MR328954

Original price €5,95 - Original price €15,95
Original price
€5,95 - €15,95
€5,95 - €15,95
Current price €5,95

These are a very common clip used by a lot of different Japanese and European manufacturers. They fit into an 8mm hole and are used by Mitsubishi f...

View full details
Original price €5,95 - Original price €15,95
Original price
€5,95 - €15,95
€5,95 - €15,95
Current price €5,95

9mm Hole Screw Grommet, Mitsubishi MU480033 / MU480035

Original price €5,95 - Original price €15,95
Original price
€5,95 - €15,95
€5,95 - €15,95
Current price €5,95

These are used to mount the bumpers on several Mitsubishi models. This part fits into a hole in the metal bodywork and the plastic bumper cover is ...

View full details
Original price €5,95 - Original price €15,95
Original price
€5,95 - €15,95
€5,95 - €15,95
Current price €5,95
vehicleclips.co.uk
4.9
752 reviews on
Cliff_image
1 year ago
Verified
Very good the item arrived quicker than I expected. I only bought a pair of seatbelt stoppers, fitted one and it looks very OEM. Fitting instructions if you are not sure how to fit these, but please read anyway. (EXTREAMLY IMPORTANT) DO NOT cut a hole in your seatbelt it WILL weaken it and make it more likely to fail when you need it most. Rather, poke a SMALL hole through the centre of the seatbelt at the required height using something with a sharp point, like a thick needle to spread the fibers apart WITHOUT cutting them, only enough to make a SMALL hole, make sure the seatbelt buckle is above the hole (Hint: press the stud through so that the flat side of the seatbelt stopper faces toward the inside of the car and the nipple faces the outside) and then push the stud with the nipple on it through the webbing making sure the fibres of the seatbelt go around the nipple. This can be quite difficult but only make the hole just big enough to allow the nipple to squeeze through, I cannot stress this enough, DO NOT be tempted to cut the fibres to make the hole bigger. Take the backing plate (the one with the hole in it) and place it over the nipple and press hard, this takes considerable force, DO NOT use pliers', if necessary use two small pieces of wood or something similar that isn't going to damage the seatbelt or the stopper to allow you to press it closed, you will feel and hear? it click closed, job done, sit back and admire your handiwork it should look very OEM. REMEMBER THE SEATBELT IS THERE TO SAVE YOUR LIFE SO DO NOT DAMAGE IT.
A reviewer_image
1 year ago
Verified
VehicleClips is a first class company with exemplary service and products. I have purchased a number of fittings for a Range Rover L322 and new VW Beetle. The website is very intuitive to use especially if you have an idea of the parts outline dimensions or a manufacturer part number. The items always arrive very quickly (almost before you've thought to order the part!) and for the high quality are very inexpensive. When I need replacement fixings VehicleClips is always the first company I go to.
A reviewer_image
2 years ago
Verified
VehicleClip's provide a fantastic service and excellent products. The website is easy to use and has very useful dimensional specifications which I used to compare and select the fixings required. This review is for the first purchase, followed by a second for another fastener and in both cases the products were perfect. The items were very competitively priced and postage was free, packages arriving within 24-48hrs of ordering, brilliant!
A reviewer_image
2 years ago
Verified
I placed my order with VehicleClips, despite receiving slightly cheaper offers from elsewhere, because the company provided fully dimensioned sketches of each of its products that enabled me to place my order confident in the knowledge that I had chosen the correct clips. An emailed confirmation order was received within seconds with a follow-up confirmation of dispatch, (complete with a tracking reference), issued on the first working day following my order. The clips were despatched using Royal Mail's standard service and arrived two days later. They were easy to install and fitted perfectly. Thank you, VehicleClips. I couldn't have wished for better service.
A reviewer_image
2 years ago
Verified
I needed to replace some clips in my elderly Ford C Max, which had disintegrated whilst removing an internal panel. From my vague description, Richard searched , not only Ford parts, but other manufacturers, to identify those I needed. Without doubt this company, and its employees represent the very best of British businesses, for service, communication, and speedy delivery. Absolutely amazing in this day and age
A reviewer_image
2 years ago
Verified
Excellent service. Very reasonable price and the clips were dispatched delivered very quickly.. I’ll be using VehicleClips again. My only extremely minor criticism is I needed these clips for a Subaru but couldn’t find them listed. I did a search using the dimensions of the broken clips I had and found them that way but they were listed as being for a Mitsubishi. This is nit picking though. Overall couldn’t fault the price and service.