vvo

These clips have a 7.7mm diameter shaft and are used in the wheel arch lining on some Toyota models including the GT86. The clip is an expanding pu...

This plastic push fit clip is a standard black rivet style fastener. They fit into an 8mm hole and are a good universal fastener that can be used f...

Locking nuts are used to join parts using the locking nut and a screw. The locking nut will sit in a hole within the bodywork such as a corner of t...

These blue screw grommets fit into a square 8mm x 8mm hole. This type of fastener is used to secure trim or parts onto bodywork without the need fo...

These flexible plastic blanking plugs are used to seal holes in bodywork or trim panels. Most vehicles have a number of access holes in the bodywor...

These heavy duty fasteners are typically used for larger trim panels such as bumpers, under body shields, side skirts and wheel arch linings. The c...

These white screw grommets fit into a 9.5mm square hole. They are used on several different Land Rover models and are typically used on exterior tr...

These are fitted to many different Toyota cars and vans. They are used on bumpers, side skirts, radiator grilles, spoilers, undertrays and engine s...

These are used to mount the bumpers on several Mitsubishi models. This part fits into a hole in the metal bodywork and the plastic bumper cover is ...

This type of clip is normally used on larger exterior panels such as bumpers, side skirts and radiator grilles. They are extremely common on Toyota...

These clips are fitted to some Peugeot and Citroen models that are produced with Mitsubishi parts. It is a simple 9mm push fit plastic rivet that i...

This is a heavy duty screw fit clip often used on larger trims and covers. They are found on bumpers, wheel arch linings, splash guards, engine shi...

A 9mm clip used on a number of Toyota and Lexus vehicles including the MR2, Supra, Celica and LS400. The clip fits into a 9mm hole and is recognisa...

These trim clips are used on some models of the Smart Fortwo and Forfour to attach the wheel arch linings and the bumper trims.

These 9mm push fit rivets are used on several Mitsubishi models including the Mitsubishi Lancer Evolution models 8, 9 and 10. They are used for att...

These plastic rivets are a replacement for Toyota part number 90467-09227. The clip has a grey centre pin and they are normally used on the undersi...

These simple plastic rivet clips are used on several different Audi models and across the Volkswagen range. They fit into an 8mm hole and are used ...

These push fit rivets are used on some Citroen models that are made in conjunction with Mitsubishi. They are used to attach larger trim panels such...

These clips are used on some of the Peugeot and Citroen cars that are produced with Toyota. They are used as front and rear Citroen C1 bumper clips...

These clips are used on some of the Peugeot and Citroen cars that are produced with Toyota. They are used as front and rear Peugeot 107 bumper clip...

These clips are used across the VW range of cars but are also a perfect fit for the standard holes in VW vans. On the cars they are normally used f...

These clips are not very commonly used by Vauxhall but are fitted to some of the more recent models. The clips are used to attach arch linings, und...

These plastic clips are used on the Jeep Renegade to secure rear wheel arch linings and around the front bumper. The clip fits into an 8.5 or 9mm h...

These screw fit plastic fasteners are used on some Fiat models normally to secure bumpers and wheel arch linings. The clips fit into an 8.5 or 9mm ...

These screw fit plastic trim fasteners are used on some Alfa Romeo models to attach bumpers and wheel arch linings. They fit into a 9mm diameter hole.

These short clips are normally used for fastening bumpers, grilles, sill moulding trims and radiator covers in place. They may also be used for eng...

These distinctive trim clips are used on bumpers, shields and undertrays. They fit into a 9mm hole and have a wide 33mm collar.

These are used on most modern Hyundai cars. The clips are used to attach wheel arch linings and occasionally bumpers and trim.The grommets fit into...

These 9x9mm square hole plastic nuts are used on some modern Mini cars to attach the rear bumper trims in position against the bodywork.

These plastic lock nuts, lokuts or screw grommets fit into a square 9mm x 9mm hole. Each one includes a foam sealing washer. They are identical to ...

These small white clips are used to attach the interior A-pillar trim. This is the plastic trim that runs down the interior of the car between the ...

These clips are a twist lock fastener used for access panels on several BMW cars. The clip is normally used on panels in the boot or around the das...

These are the clips fitted into the tailgate of the car which the parcel shelf hangs from. When the tailgate is opened, the parcel shelf lifts. The...

These small red plastic moulding clips are the parts that secure the wheel arch trims to the bodywork on the Alfa Romeo Stelvio. Each wheel arch ha...

These are used on the old Audi 100 to mount plastic exterior trim mouldings.

A popular 8mm push pin rivet that is used on some Audi cars to attach splashguards, bumper covers and engine bay covers.

These are a distinctive expanding rivet used on the first Audi A3 to secure the top of the front bumper to the landing panel. There are four clips ...

This sprung clip is very simple. The clip squeezes together to be fitted and expands once it is in place. Most Audi vehicles use these to fasten bo...

These small white clips attach the ends of the door mechanism connecting rods that run between the various locks, handles and latches of the doors....

Very common across the modern Audi range, these distinctive clips actually push in to expand and clip into place. The short stem fits into an 8mm h...

These are large door card clips fitted to a few Audi models. The clips are distinctive and each one has an integrated rubber seal.

These are used by manufacturers in the VAG group including Porsche. They attach onto interior trim covers normally on the A, B or C pillars of the ...

This is a very common and very widely used clip. It's normally used on interior trims but can be for a very wide range of purposes. Door cards, pil...

These are one of several types and sizes of screw grommet fitted to most modern Audi cars. They are used for mounting anything from number plates t...

These clips fit into a retainer on the trim or door card. When the trim is then located and pushed onto the bodywork, these clips lock in place and...

These are used on a lot of Audi models. The parts are normally used as Audi undertray clips for attaching protective panels on the underside of the...

These star or Torx head screws are a suitable replacement for the parts used on many Audi cars to secure the front and rear wheel arch linings or s...