Seat Car Trim Clips, Fixings and Fasteners

These star or Torx head screws are used on many SEAT cars to secure the front and rear wheel arch linings, bumpers, shields and splashguards. This ...

These black torx headed screws are used on many different SEAT models, normally to secure bumpers or wheel arch linings.

These are very common on Audi and VW cars but are used on just a few different Seat cars. The clip is distinctive with it's sprung head and integra...

These screws are very common on wheel arch linings, bumpers and other shields.

This is a very common part used on a wide range of vehicles all related to the Volkswagen Group. The clip is used for a variety of purposes from at...

These are very widely used across the VAG group. The grommet is used on a large number of parts including around bumpers, sills, side skirts, wheel...

These metal spring clips are used to hold interior trim and fascia panels in position around the dashboard.

These black inserts are mounted into the metal bodywork. They are used to securely hold a secondary clip in position.

A very common 16mm long black metal spring clip used for attaching fascias, pillar covers and interior trims. The fastener is common on a wide rang...

These are used for secure bodywork, trim panels and shields. The clip is used with a bodywork screw to hold parts in position. They are typically u...

These single use 7mm black fir tree clips are used by Seat on several different models. The clips are black with a 20mm diameter head. They are use...

These are a standard interior trim panel clip used on several Seat cars and across the VW group. The clips are normally used for door cards, interi...

The distinctive clips are used as Seat interior side trim panel and door card clips. Each fastener has a kind of sprung head which helps to reduce ...

These unthreaded plastic nuts are used to secure protective shields and trims to the bodywork on several SEAT models.

SEAT use these parts for interior trim such as seat base trim and access panels on the dashboard, centre console and footwell.

A simple push fit pin rivet used on item such as bumpers, engine bay shields, undertrays and side skirts.

These simple push fit plastic rivets are normally used by SEAT on front grilles, radiator covers and bumpers. The clips fit into a 6mm hole and exp...

These distinctive trim clips are used on some SEAT models for securing exterior trim such as bumpers.

These clips are used by Audi and Seat. These were fitted as Seat Exeo door card clips. Each fastener has a rubber seal attached.

These are used with twist lock pins that push into these retainers and lock in place. The clips and pins are nearly always used for underbody acces...

These strong and sturdy clips are used on the protective panels mounted on the underside of several Seat cars. The clips fit into a retainer and tu...

These steel fasteners are used to attach some exterior trim and body parts such as bumpers and radiator grilles.

These plastic fasteners are used on underbody shields and covers.

These distinctive plastic rivets are used on a wide variety of VW, Audi and SEAT cars. The clip is used for many different purposes from engine bay...

These clips are used on several Seat models. They are used for everything from mounting sensors to underbody shields to interior trims and upholstery.

These small pin clips are used on interior trims such as the door sill cover.

Normally used for door trim strips or other interior and exterior trim panels.

These clips are used on some SEAT models to secure the interior trim panel that covers the wing mirror mounting point.

These clips pinch together to fit and then expand into the holes when they are released. They are used to hold insulation to the underside of the b...

These small fasteners are used for attaching small trim panels in position. Typical uses are for bumper corners, grilles, fascia covers and interio...

A small push fit clip used on some SEAT car models to attach and secure the rubber weatherstrip that runs around the door apertures.

These small black plastic trim clips are used by SEAT to attach trim covers such as the top bonnet trim to the SEAT Leon Mk2.

An unthreaded plastic nut used for items such as bumpers, wheel arches and engine bay shields. These nuts are fitted to a coarsely threaded metal s...

These distinctive looking clips are used as spacers for interior trim panels such as sill covers or pillar covers.

These distinctive clips attach roof lining panels, interior pillar covers and other trim panels onto several Seat models.

These are fitted to a lot of modern Seat cars and also very widely used on other vehicles in the VW group. The clip is used for mounting parts to t...

Weatherstrip clips are used to attach the rubber weatherstrip that sit in door openings, around the boot and occasionally around the bonnet. The se...

These plastic spacers / washers are used with metal clamps to secure underbody shields into position. They are very common across the VW group.

These clips fit into the tailgate either side of the rear window. The parcel shelf string attaches to this clip and then the shelf lifts when the b...

These are a very common interior trim panel screw used on a wide range of SEAT cars. Typical uses include around the doors, centre console, dashboa...

This M6 bolt is used to attach interior trim and linings on some SEAT models including the Arona and the Ibiza Mk5.