Seat Ateca Fixings Trim Clips and Fasteners -Mk1 (2016-)

These spring clips are normally used on narrow trim strips on the inside of the vehicle. Examples include pillar trims, roof linings and tailgate l...

These metal nuts are very widely used on the SEAT range to secure parts such as arch linings, undertrays, sill covers and bumper trims.

Seat use two clips like this one that just vary in length. This version is 22mm long and there is also a 16mm version (Our part number FCP-0404). T...

These clips are used on parts such as pillar covers and tailgate linings. The metal clip fits onto a lug on the trim. The lug and metal spring clip...

These screws are very common on wheel arch linings, bumpers and other shields.

This is a very common part used on a wide range of vehicles all related to the Volkswagen Group. The clip is used for a variety of purposes from at...

These metal spring clips are used the hold on fascia panels and dashboard trim on the interior of several SEAT models. The clip normally fits to a ...

Very common across the entire Volkswagen Group of VW, Audi, SEAT, Skoda and Porsche. The clips are used with wheel arch liners, interior trims, qua...

Small metal edge clip normally used by SEAT for screwing in bumpers and arch linings.

This sprung clip is very simple. The clip squeezes together to be fitted and expands once it is in place. It is used on a large number of different...

These locking star washers are suitable for attaching underbody noise and heat insulation. The corrosion resistant parts are used throughout the Se...

These are used for secure bodywork, trim panels and shields. The clip is used with a bodywork screw to hold parts in position. They are typically u...

SEAT use these parts for interior trim such as seat base trim and access panels on the dashboard, centre console and footwell.

These single use 7mm black fir tree clips are used by Seat on several different models. The clips are black with a 20mm diameter head. They are use...

These unthreaded plastic nuts are used to secure protective shields and trims to the bodywork on several SEAT models.

A very common 16mm long black metal spring clip used for attaching fascias, pillar covers and interior trims. The fastener is common on a wide rang...

These white plastic trim clips slide onto the back of body moulding strips. They are used to secure the strips to the bodywork. On every clip we in...

A simple push fit pin rivet used on item such as bumpers, engine bay shields, undertrays and side skirts.

These small plastic grommets or lock nuts are used on a range of different vehicles within the VAG group. They are used in a number of different pl...

These white body and trim panel clips are used on some SEAT models to attach trim panels such as door cards, interior side trims and also to secure...

These simple push fit plastic rivets are normally used by SEAT on front grilles, radiator covers and bumpers. The clips fit into a 6mm hole and exp...

These are used by manufacturers in the VAG group including Porsche. They attach onto interior trim covers normally on the A, B or C pillars of the ...

These distinctive looking clips are used as spacers for interior trim panels such as sill covers or pillar covers.

This kit provides a full set of fasteners for the engine undertray on the SEAT Leon Mk4 and the Ateca. The kit include OE standard fasteners and in...

These clips are used on many different cars and commercial vehicles within the Volkswagen group including models produced by Seat, Skoda and VW. Th...