Screw Grommets & Locknuts

This clip pushes into an 8mm square hole and is normally used to hold flexible panels such as wheel arch linings and splash guards. The centre hole...

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Toyota models. They are used on several models normall...

These small plastic grommets or lock nuts are used on a range of different vehicles within the VAG group. They are used in a number of different pl...

These are positioning grommets that fit into the metal bodywork of the car. The tail lights have lugs on them that then fit into these grommets.

This part is used on modern Ford cars and vans. The grommet is typically used for mounting front or rear lamps and bumpers.

These are very widely used across the VAG group. The grommet is used on a large number of parts including around bumpers, sills, side skirts, wheel...

These are one of several types and sizes of screw grommet fitted to most modern Audi cars. They are used for mounting anything from number plates t...

These black rubber grommets are used in conjunction with other clips to mount parts such as wheel arch flares, side skirts, sill mouldings and pill...

This oval shaped screw grommet is designed to mount parts and trim panels in place on the bodywork. The part is used on several Renault models incl...

These are distinctive screw grommets used by BMW on most of their recent vehicles to secure door cards and trim panels. The clip is unusual in that...

Plastic clip that is used to retain shields and linings normally around the wheel arches. The clips can also be used as screw grommets and so are o...

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Peugeot models. They are used on several models normal...

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Toyota models. They are used on several models normall...

These are very common on Mitsubishi cars and pick up trucks. The plastic spire-type clips are normally around the edges of the wheel arch lining wh...

A common screw grommet fitted to many Audi vehicles. The clip is used throughout and example uses are wheel arch linings, pillar trims, door cards,...

These plastic screw grommets are used around the wheel arch lining and for wheel arch trims on a number of Nissan and Infiniti cars. They are used ...

These rubber inserts are used with other fasteners and provide a seal and firm hold into the bodywork. This part is widely used across the Volkswag...

These small plastic grommets or lock nuts are used on a range of different vehicles within the VAG group. They are used in a number of different pl...

These clips are extremely common across the Toyota range. The clips are normally used around the edges of the wheel arch. They mount onto the wing ...

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Citroen models. They are used on several models normal...

These clips are widely used across the Kia range. They are used to mount parts such as wheel arch splashguards, side skirts, sill covers, bumpers a...

These are used on a number of different Toyota cars from the Auris to the Avensis and up the Lexus LFA. They can be used in many different location...

These are used on most modern Hyundai cars. The clips are used to attach wheel arch linings and occasionally bumpers and trim.The grommets fit into...

These bodywork screw grommets are found on old and new VW cars and commercial vehicles. Example uses include Mk2 Golf wheel arch lining clips, Mk3 ...

These screw grommet mounts have an integrated rubber seal. They are used for locating and mounting panels such as door card trims, side skirts and ...

These are very widely used across the VAG group. The grommet is used on a large number of parts including around bumpers, sills, side skirts, wheel...

These clips are used around the edges of the wheel arch. They mount onto the lip of the wing and then the plastic wheel arch liner is attached when...

These black plastic locknuts or screw grommets fit into 10mm square hole. The grommet fits into a hole in the metal bodywork and allows a screw to ...

These clips are used by Hyundai for mounting parts and trim to the metal bodywork on several of their models. An example use is for the wheel arch ...

These are a very common clips fitted to most Audi and VW cars in the last 30 years. They are a standard screw grommet and are used throughout the v...

Very widely used across the Vauxhall model range, these clips are almost always used on or around the front bumper and radiator grille. The nut fit...

Used on several VW cars and vans, these are also a good universal screw grommet for mounting and joining parts and panels.

These small black grommets are fitted into the wing and used with a screw to line up and fix the corner of the bumper. They are used on a number of...

These clips are used on the door panels to hold the interior trim. The clips twist to expand and lock in position where they are then used to mount...

This type of part is for mounting trims, panels or parts onto metal bodywork. The grommet fits into a hole in bodywork. The part is then aligned wi...

These screw grommets fit into a square 9x9mm hole. The part is used with a screw to fasten plastic bumpers, spoilers, headlamps and mudguards onto ...

These clips are pushed into square holes and click in place to hold wheel arch linings, sill trims and engine shields. The clips can also be used a...

This is a standard plastic spire clip that will normally be used for securing parts to bodywork. They're commonly used to attach plastic bumper cov...

An oval screw grommet widely used across the Peugeot range and across their vehicles. The grommet is used for mounting trims, panels and parts into...

These are widely used across the Citroen and Peugeot range. The clip is oval shaped and is used all over the vehicles. The shape of the clip allows...

These rubberised inserts are normally used with part number FCP-0400 to attach parts such as side skirts, door mouldings and wheel arch flares.

These black inserts are mounted into the metal bodywork. They are used to securely hold a secondary clip in position.

Very common on modern BMW tailgate or boot hatches, these expanding lock nuts are used to attach the plastic trim covers. This part fits directly i...

These are very widely used across the VAG group. The grommet is used on a large number of parts including around bumpers, sills, side skirts, wheel...

These screw grommet mounts have an integrated rubber seal. They are used for locating and mounting panels such as door card trims, tailgate linings...

These are used for secure bodywork, trim panels and shields. The clip is used with a bodywork screw to hold parts in position. They are typically u...

These are very widely used across the VAG group. The grommet is used on a large number of parts including around bumpers, sills, side skirts, wheel...

These clips are known as spire clips, chimney nuts, u-nuts. The clips is used to attach parts as varied as bumpers, wheel arch linings and interior...