Skip to content

Peugeot Interior & Exterior Trim Panel & Moulding Clips, 6991S6

SKU: FCP-0024-PE1

• Common across the Peugeot range

• Used to attach many different parts

• High quality OE alternative

Original price €0
Original price €5,95 - Original price €16,95
Original price
Current price €5,95
€5,95 - €16,95
Current price €5,95
Title: Pack of 10
These are one of the most commonly used trim clips across the Peugeot range. These white plastic trim clips are used to fit a multitude of different parts such as door cards, tailgate linings, exterior trims, side mouldings, side skirts and wheel arch flares. The clips are used in different places on different models so please be sure to compare the photo and check the Peugeot part number to ensure that they are the clips you need.

Peugeot Part Number: 6991S6

Hole Size: 10mm

Colour: White

Bonnet Trim Fastener, Front Door Card, Interior Side Trim, Sliding Side Door Mechanism Cover, Tailgate Exterior Trim, Tailgate Lining Clips and Boot Lid Lining, Rear Door Card, Front Wheel Arch Flare and Trim Moulding, Rear Wheel Arch Flares and Moulding Trim, Side Skirt, Sill Moulding Cover Trim, Boot Carpet and Interior Lining

You may also like

Trim Panel and Moulding Cover Clips, Citroen 812396

Original price €5,95 - Original price €16,95
Original price
€5,95 - €16,95
€5,95 - €16,95
Current price €5,95

Moulding clips used to attach trim panels and pillar covers on the inside and out side of the vehicle.

Original price €5,95 - Original price €16,95
Original price
€5,95 - €16,95
€5,95 - €16,95
Current price €5,95

Interior & Exterior Trim Panel & Tailgate Lining Clips- Peugeot 6991Z1

Original price €5,95 - Original price €17,95
Original price
€5,95 - €17,95
€5,95 - €17,95
Current price €5,95

These blue Peugeot trim panel clips are widely used to attach interior trim panels across the range. The clips are used in different places on diff...

View full details
Original price €5,95 - Original price €17,95
Original price
€5,95 - €17,95
€5,95 - €17,95
Current price €5,95

Trim, Moulding & Door Card Clips- Peugeot 6991Y8, 9341PF

Original price €6,95 - Original price €18,95
Original price
€6,95 - €18,95
€6,95 - €18,95
Current price €6,95

These plastic trim clips are used on lots of different Peugeot models since 2003 and are still fitted to current models in 2019. The clips are used...

View full details
Original price €6,95 - Original price €18,95
Original price
€6,95 - €18,95
€6,95 - €18,95
Current price €6,95

Trim, Moulding & Door Card Clips- Citroen 6991Y8, 9341PF

Original price €6,95 - Original price €18,95
Original price
€6,95 - €18,95
€6,95 - €18,95
Current price €6,95

These plastic trim clips are used on lots of different Citroen models since 2002 and are still fitted to current models in 2019. The clips are used...

View full details
Original price €6,95 - Original price €18,95
Original price
€6,95 - €18,95
€6,95 - €18,95
Current price €6,95

Citroen Interior & Exterior Trim Panel & Moulding Clips, 6991S6

Original price €5,95 - Original price €16,95
Original price
€5,95 - €16,95
€5,95 - €16,95
Current price €5,95

These are a very common interior and exterior trim panel clip used by Citroen. Our aftermarket alternatives are a high quality replica produced to ...

View full details
Original price €5,95 - Original price €16,95
Original price
€5,95 - €16,95
€5,95 - €16,95
Current price €5,95
vehicleclips.co.uk
4.9
778 reviews on
Cliff_image
1 year ago
Verified
Very good the item arrived quicker than I expected. I only bought a pair of seatbelt stoppers, fitted one and it looks very OEM. Fitting instructions if you are not sure how to fit these, but please read anyway. (EXTREAMLY IMPORTANT) DO NOT cut a hole in your seatbelt it WILL weaken it and make it more likely to fail when you need it most. Rather, poke a SMALL hole through the centre of the seatbelt at the required height using something with a sharp point, like a thick needle to spread the fibers apart WITHOUT cutting them, only enough to make a SMALL hole, make sure the seatbelt buckle is above the hole (Hint: press the stud through so that the flat side of the seatbelt stopper faces toward the inside of the car and the nipple faces the outside) and then push the stud with the nipple on it through the webbing making sure the fibres of the seatbelt go around the nipple. This can be quite difficult but only make the hole just big enough to allow the nipple to squeeze through, I cannot stress this enough, DO NOT be tempted to cut the fibres to make the hole bigger. Take the backing plate (the one with the hole in it) and place it over the nipple and press hard, this takes considerable force, DO NOT use pliers', if necessary use two small pieces of wood or something similar that isn't going to damage the seatbelt or the stopper to allow you to press it closed, you will feel and hear? it click closed, job done, sit back and admire your handiwork it should look very OEM. REMEMBER THE SEATBELT IS THERE TO SAVE YOUR LIFE SO DO NOT DAMAGE IT.
Show more
A reviewer_image
1 year ago
Verified
VehicleClips is a first class company with exemplary service and products. I have purchased a number of fittings for a Range Rover L322 and new VW Beetle. The website is very intuitive to use especially if you have an idea of the parts outline dimensions or a manufacturer part number. The items always arrive very quickly (almost before you've thought to order the part!) and for the high quality are very inexpensive. When I need replacement fixings VehicleClips is always the first company I go to.
Show more
A reviewer_image
2 years ago
Verified
VehicleClip's provide a fantastic service and excellent products. The website is easy to use and has very useful dimensional specifications which I used to compare and select the fixings required. This review is for the first purchase, followed by a second for another fastener and in both cases the products were perfect. The items were very competitively priced and postage was free, packages arriving within 24-48hrs of ordering, brilliant!
Show more
A reviewer_image
2 years ago
Verified
I placed my order with VehicleClips, despite receiving slightly cheaper offers from elsewhere, because the company provided fully dimensioned sketches of each of its products that enabled me to place my order confident in the knowledge that I had chosen the correct clips. An emailed confirmation order was received within seconds with a follow-up confirmation of dispatch, (complete with a tracking reference), issued on the first working day following my order. The clips were despatched using Royal Mail's standard service and arrived two days later. They were easy to install and fitted perfectly. Thank you, VehicleClips. I couldn't have wished for better service.
Show more
A reviewer_image
2 years ago
Verified
I needed to replace some clips in my elderly Ford C Max, which had disintegrated whilst removing an internal panel. From my vague description, Richard searched , not only Ford parts, but other manufacturers, to identify those I needed. Without doubt this company, and its employees represent the very best of British businesses, for service, communication, and speedy delivery. Absolutely amazing in this day and age
Show more
A reviewer_image
2 years ago
Verified
Excellent service. Very reasonable price and the clips were dispatched delivered very quickly.. I’ll be using VehicleClips again. My only extremely minor criticism is I needed these clips for a Subaru but couldn’t find them listed. I did a search using the dimensions of the broken clips I had and found them that way but they were listed as being for a Mitsubishi. This is nit picking though. Overall couldn’t fault the price and service.
Show more