Ford Car & Van Trim Clips, Fixings & Fasteners

These distinctive looking trim clips are fitted to the interior trim panels and some door cards on the Transit and Transit Connect. The clips are n...

These black and white trim clips are normally used as Ford door card clips. They are fitted to the Mk4 Fiesta and the Ford Puma. All of our parts a...

These clever clips push to fit and can be released with a quarter turn of the screw head. They are perfect for panels where access may be occasiona...

These clips are used on a few of Ford's commercial vehicles. The clips are used to hold exterior bodywork trim panels in place such as side mouldin...

This clip fits into an 8mm hole. They are used on several Ford models for securing interior or exterior trim panels.

These distinctive fir tree fasteners are used on many modern Ford cars and vans. The clips are a simple barbed push fit spruce or fir tree clip. Th...

Used on several Ford cars and commercial vehicles, these clips are normally used as wheel arch lining clips, interior trim panel clips or upholster...

This is a bonnet stay holder that the rod clips into when not in use. They get brittle over time and can break. These are simple replacement to kee...

These fasteners are used to secure brake lines on many, but not all, modern Fords.

These clips are used to fit the front and rear door card onto the Mk2 Ford Galaxy (2000-2006). These are a high quality aftermarket alternative part.

These unusual clips are one of several used to attach the front and rear door cards on the Ford Fusion and Ford Fiesta Mk5 (2002-2008). The clip ha...

These are a trim panel and body moulding fastener used by Ford on some cars and commercial vehicles.

Used on various engine bay shields by Ford and may also be used for interior trim panels.

These blind rivets are used by Ford on some vehicles to secure bumpers and other body parts. It is a standard rivet but comes with a plastic end ca...

These are small black fasteners used on a small number of older Ford vehicles. The clips are typically used for interior upholstery, carpets and tr...

These blue trim clips are used on some Ford vehicles including for the exterior tailgate trim moulding on some Mondeo models.

These small edge clips are used on some Ford models to secure the plastic windscreen cowl that covers the wiper motor and linkage at the bottom of ...

This type of clip is often used on interior pillar covers. The clip fits onto a lug on the trim panel and then pushes into a hole in the metal body...

These yellow clips are fitted to the Ford Transit Connect and are used to keep the bonnet stay in position when the bonnet is closed and the stay i...

This clip is used to secure the bonnet support stay in position when the bonnet is closed. If the clip is damaged and cannot be used then it can ca...

This part has the Ford Finis part number 6181023 and is used on some older Fords such as early model Fiesta, Escort and Focus cars. The clip fits i...

These are used by Ford to attach the interior D pillar trims in the boot area of the Focus C-Max and C-Max (2003-2010).

These clips are used to secure exterior trim panels such as side skirts or sill mouldings. The clip slides into position on the trim and then the c...

This distinctive, large headed push fit plastic rivet is used on several Ford commercial vehicles. This type of clip with the large head is normall...

These are the plastic trim clips that are used to attach the sound deadening to the underside of the bonnet on the TT9 Ford Transit made between 20...

These grey trim clips were used by a few different manufacturers on older vehicles. Ford used these in particular as door card clips on the Fiesta ...

These small metal spirng clips are often used on the interior pillars or for other interior trim panels around the vehicle. The metal spring clip i...

These black clips are used on the latest model of Ford Kuga (2020 onwards) to attach the side skirts or sill cover mouldings.

These white, two-piece clips are used to secure door cards and interior trim panels to some Ford models including certain versions of the Puma and ...

These blue plastic trim clips are used on the door cards and the rear quarter panel lining trims on some early models of the Ford Fiesta and Sierra...

These are easy to recognise with their rectangular collar. They are used on older Ford cars, normally on wheel arch linings or splashguards.

These black fasteners are used to secure the interior pillar covers to some Ford models such as the Mk1 and Mk2 Mondeo. The clip is distinctive and...

These small clips are easy to fit and easy to release. A quarter turn of the head is enough to release the centre pin and allow them to be removed....

These clips are used to attach the rubber weatherstrip seals around the door openings on some models of the Ford Galaxy.

These clips are used on some versions of the Ford Fiesta to attach front and rear door cards.

This very distinctive orange clip is one of the types used to attach the front and rear door cards into position on the 2nd generation Ford C-Max (...

A simple to use, push fit fir tree clip used by Ford on parts such as tailgate linings. These clips hold tight in an 8mm diameter hole. They are us...

This kit contains a full set of fasteners to reattach the engine undertray panel onto the last version of the Ford Focus (2018 on). The parts are a...