[CloudSearch app] All products

These are used on some of the older 3-Series and 5-Series BMW models such as the E36 and E39. They are a standard 5mm push pin plastic rivet. They ...

These simple plastic rivet clips are used on several different Renault models. They are a strong, heavy-duty clip that fits into a 9mm hole and the...

These are a standard push fit plastic rivet. The centre pin is pushed in, locks in place and holds the clip in position. These are typically used o...

This wide collared trim is used on loose fitting trims and insulation panels. It is common on interior carpet linings, bonnet insulations and other...

These clips are used to fasten down the plastic covers that sit on top of the headlights on the T5 model vans.

This part is easily damaged or lost but very simple to replace. The centre pin of the clip is pushed in to lock the clip in place and the parcel sh...

A two-part clip that is used to attach the wheel arch lining to the wing on models including the Toyota IQ, RAV4, Previa and some models of the Ave...

Found on many different Ford models this expanding nut is normally used to attach front or rear bumpers and wheel arches to the wing.

Very common across the entire Volkswagen Group of VW, Audi, SEAT, Skoda and Porsche. The clips are used with wheel arch liners, interior trims, qua...

These clips run along the outer sill of the car and are used to position the sill moulding trim or side skirts. They are used on several Focus models.

This clip fits into a 7mm hole and expands when the centre pin is inserted.

Widely used on modern Nissan cars and vans, these clips are normally used for bumpers, grilles, undertrays and wheel arch liners. The clips are a s...

These clips are one of several used to hold the various sizes and styles of side moulding bumpstrips to the vehicles. These styling strips are moun...

These hard to find clips are not sold individually by Peugeot. They only list them with the entire wheel arch trim yet they often break if that tri...

This is one of the most common sizes of screw used by Audi for the wheel arch linings on their vehicles.

Simple 6mm plastic push fit rivet used by many different motorcycle and ATV manufacturers to attach fairing covers, trim panels and shields to vehi...

These are the exact clips used by Jaguar to attach the side skirts / sill moulding cover onto the R-Sport version of the XE. Jaguar do not sell the...

These clips are used on Ford vehicles to secure a wide range of parts. Example uses are front grille clips, engine bay shield fasteners and wheel a...

These are very widely used on modern Renault and Dacia vehicles. The trim clips push onto a metal stud and are used to pin down carpets, fasten whe...

Normally used to secure wheel arch linings, splashguards, undertrays or bumpers, these simple screw fit plastic rivets are used on several differen...

These clips are used on some models of the Vito, Metris and Sprinter. The clip is a standard 8mm push fit rivet that is used to hold panels and tri...

These are distinctive screw grommets used by BMW on most of their recent vehicles to secure door cards and trim panels. The clip is unusual in that...

These short clips are normally used for fastening bumpers, grilles, sill moulding trims and radiator covers in place. The clips have a mottled fini...

These light blue plastic trim clips are very common on Hyundai cars. They're widely used on the interiors for securing pillar covers, door cards, b...

These M6 nuts are normally used along the underside of the bumper or sill to attach undertrays or trims.

A good universal interior trim clip, this part is used by Peugeot, Citroen, Fiat and Alfa Romeo. The clip fits into a 9mm hole and includes a pre-f...

These distinctive clips are used on some Ford cars and commercial vehicles. The clip head turns to unscrew and release the clip. They are normally ...

These grey plastic fir tree clips are one of the types of clip used to secure the headlining above the cab on the Mk7 Transit.

These push fit grey plastic clips are used to attach the lower body mouldings onto the sill of several Ford models. The clips slides onto the back ...

These button clips are used to retain the sound deadening material that it fitted to the underside of the bonnet. They are used on most modern Mini...

A standard 8mm push fit plastic rivet used for attaching interior and exterior trim panels such as wheel arch linings, boot linings, engine bay shi...

This oval shaped screw grommet is designed to mount parts and trim panels in place on the bodywork. The part is used on several Renault models incl...

These clips are a perfect fit for the standard holes in VW vans. They are longer than the original clips and so they allow for thicker panels to be...

These small plastic clips are used by VW to secure some parts such as bumper trims, side and sill mouldings and some interior panels. The clips fit...

Used to hold the plastic wheel arch linings / splash guards in place on some models of Vauxhall and Opel vans. The large diameter head is flexible...

This distinctive fastener is used on several modern Mercedes vehicles. They are typically fitted to access panels on arch linings, around the engin...

This small fir tree clip is common on Mercedes vehicles. They are most often used on the trim or seal that runs on the top of the front wing within...

These parts are used with screws to mount panels and trims. They are common on under body trays, splash guards and engine bay shields. They are use...

These yellow clips come pre fitted with the foam sealing washers. They are used on the several Land Rover and Range Rover models. The clip is used ...

A very common screw / bolt used by BMW to secure parts such as bumpers, undertrays and arch linings.

These plastic expanding nuts are used on lots of different BMW cars. They can be found throughout the body and interior and used to attach panels, ...

These clips are used on door cards, trim panels and body mouldings. Each clip has a rubber seal built in. This is an increasingly popular clip fitt...

These pink plastic clips are for exterior trim such as the lower door mouldings or the wheel arch flares.

This plastic fastener fits into an 8mm diameter hole and expands to securely lock in place when the centre pin is inserted. They are used by VW on ...

These clips fit into a 7mm hole. They simply push into the hole and expand to lock in position when the centre pin is inserted. This clip is used b...

Each of these clips come with a rubber washer pre-fitted. They are normally used by BMW to mount side skirts or sill moulding covers. They are used...

These push fit plastic fasteners are used on many different Volkswagen cars and vans and for a wide range of purposes. They are used on the VW Tran...