[CloudSearch app] All products

These oval grommets are used for mounting and positioning parts such as pillar covers, sill entrance covers and any other trim panels and upholster...

These 6mm fir tree clips are used on many Citroen cars to fasten bonnet insulation, boot linings and wheel arch splash guards. The clips fit into a...

These grey moulding clips are used on the side of the Vauxhall Astra G. The clip is used to attach the plastic mouldings that run along the exterio...

These threaded nylon nuts are used on some Skoda models to affix rear bumper covers, trims or impact bars.

These push fit clips fit into a 7.2mm hole and are widely used by Toyota and Lexus. The clip is common on wheel arch linings but also used on winds...

This clip is very popular across the Toyota range. It is most often used on interior trim panels such as door cards, boot linings and pillar covers...

These simple black plastic push fit clips can be used on most lightweight trim panels. They are used by several different automotive manufacturers ...

These 10mm push fit plastic rivets are used on several Honda models normally to attach radiator grilles and bumpers.

These grey trim clips were used by a few different manufacturers on older vehicles. Ford used these in particular as door card clips on the Fiesta ...

These clips are strong and secure parts used to lock undertray panels in place on several Volkswagen cars. The clips push into a retainer and then ...

This sprung clip is very simple. The clip squeezes together to be fitted and expands once it is in place. It is used on many different Skoda cars t...

These small trim clips are easily removable. The centre pin pushes in to engage and lock the clip but with a quarter turn of the screw head, the pi...

These 8mm screw fit plastic fasteners have a wide expander so are normally used on wheel arch linings or other loose fitting shields. They are eas...

These are used on a few different vans. They are there to hold the protective plastic mouldings onto the lower sides and rear doors. They are almos...

These unthreaded nylon nuts self tap onto threaded studs that are fixed to the bodywork. The clips are often used on wheel arch linings, bumpers, a...

These arrow head clips are used to attach rubber weatherstrips in place on parts such as the bonnet and bulkhead.

Thisis by far the most common sump plug washer used by Honda for it's range of cars and fits most of their car range from the 1980s onwards.

A standard dark grey fir tree clip used by Fiat on some vehicles for interior and exterior trims.

Our range of hose connectors are available in small packs or in larger bulk purchases. They are suitable for a range of uses and are made from toug...

Grey plastic fasteners used by Mazda to attach the plastic trim that runs around the edge of the wheel arch. This clip is used on the Mazda CX-3 Mk...

These green plastic clips look different before they are fitted as they have a washer that forms part of the mould. During installation, the washer...

These screw grommets are widely used by BMW and fitted to many different models. Typical uses includes front or rear bumpers and tailgate trims. Th...

These wide collared plastic nuts lock in position when turned. They are used on the underside of many different Mini models for engine undertrays a...

These distinctive red plastic trim clips are used on some Fiat cars to attach exterior body trim mouldings. One example is Fiat Panda Cross wheel a...

These plastic nuts are used on threaded studs that are normally welded to the bodywork of the vehicle. The wide collar acts like a washer and the p...

This plastic washer is used with twist lock bolts and act to hold the removable covers in place onto rear bumpers of several Audi cars. The covers ...

These black plastic clips with pre fitted foam sealing washers are used on many different BMW cars but rarely on Minis. They are used on the F57 Mi...

These are used on the Nissan Primastar.

These sprung nuts are used to hold a barbed metal pin. They are normally used on under body shields and protective panels. They are extremely commo...

These are used on the Vauxhall/ Opel Brava, Monterey and the Isuzu TF / Faster. The clip is used in a number of places. This type of screw fit plas...

These plugs fit into holes in the bodywork or in plastic side skirt or sill trims. Each clip has a small rubber o-ring seal around the stem.

These are used on some 5-series and 6-series BMW cars to attach the side skirts or sill mouldings. BMW use several similar clips with different len...

Common two-piece clip that often separates when disassembling trims or door cards. The clips are supplied and fitted in their assembled state but d...

These clips are used to attach various trim and protective panels in and around the engine bay and underside of the car. They are quite distinctive...

These standard fir tree clips are fitted to several older Honda models. The clips are used to attach interior trims and upholstery.

These are used with twist lock pins that push into these retainers and lock in place. The clips and pins are nearly always used for underbody acces...

This clip is used on the Tesla Model 3 to secure the tailgate lining trim into position.

This small screw is used on interior trim panels around the centre console as well as for the charging point surround on most electric VW vehicles.

These black plastic clips are normally used to secure wheel arch liners or underbody shields. The parts fit onto studs mounted on the body.

These clips are used by Land Rover to secure the bonnet release cable through the engine bay on several of their models including the new Defender ...

These rear seat bench clips often fail on the Tesla Model 3 and Tesla Model Y. The clips can be replaced to prevent rattles on the rear bench seats.

These black clips are used on the latest model of Ford Kuga (2020 onwards) to attach the side skirts or sill cover mouldings.

These metal clips are used with screws to attach parts such as underbody shields, engine undertrays and wheel arch linings.

A simple push-fit plastic rivet which expands and locks in position when the centre pin is inserted. These fasteners are used across the Lexus rang...

These blue plastic trim clips are used to attach the interior door card and some interior trim panels in some Smart car models.

The distinctive clips are used as Seat interior side trim panel and door card clips. Each fastener has a kind of sprung head which helps to reduce ...

These distinctive looking car clips are used on door rubber seals, boot seals and engine bay seals. The plastic clip has a long and thin collar whi...