[CloudSearch app] All products

A very common 16mm long black metal spring clip used for attaching fascias, pillar covers and interior trims. The fastener is common on a wide rang...

These green plastic trim clips attach door cards, interior pillar trims and tailgate linings on several Kia cars.

Red fasteners used on side skirts, sill covers and wheel arch flares.

These clips are the same as part number FCP-0040 except the head is rotated 90 degrees. They are normally used as the end clip or corner clips on a...

These nuts have an unthreaded internal diameter of 3.9mm. The parts are normally fitted onto a coarsely threaded stud and the thread is cut into th...

Small black plastic clips used to attach the rubber door seals on some models of the Citroen C5. These clips are still current and so may be fitted...

These white plastic chimney nuts, speed nuts or screw grommets are used on several Nissan cars including all models of the X-Trail. The clips are u...

These Mercedes side moulding clips are used on several models. Each clip includes a pre-fitted grommet. The clips side onto the plastic side mouldi...

These plastic cylinder clips are used to secure the bumper and arch trims on the early models of Smart Fortwo cars.

These clips are fitted to some Peugeot and Citroen models that are produced with Mitsubishi parts. It is a simple 9mm push fit plastic rivet that i...

These clips are used around the edges of the wheel arch. They mount onto the lip of the wing and then the plastic wheel arch liner is attached when...

These are a trim panel and body moulding fastener used by Ford on some cars and commercial vehicles.

The distinctive 8mm clips are used on several Fiat models. The use ranges from side skirts to bonnet insulation and boot linings.

These are widely used on older Honda models. The clips are used to attach many different interior trim panels from door cards to boot linings and s...

These are blue interior or exterior trim panel clips are used to attach door cards, side panels and boot lining trims on a number of Toyota models.

These small plastic fir tree clips are perfect for holding panels or trims in place. They fit into a fairly small 7mm hole but the wide 24mm diamet...

Indasa double sided moulding tape is a high quality tape for professional use. The 0.8mm thick foam tape has a strong adhesive to firmly bond mould...

These black plastic rivets fit into an 8.5mm hole and are perfect for VW and Ford van linings. The clips are long and suitable for thicker ply, ins...

These small plastic clips click into a 5mm diameter hole. The clips are used to secure lightweight parts such as air intake hoses, engine bay shiel...

Used to secure exterior trim pieces such as tailgate trims and handle covers.

These plastic rivets are used to secure front and rear bumpers, radiator surrounds and engine bay trims. They fit into a 10mm hole.

These simple push fit plastic rivets expand to lock in position when the centre pin is inserted. They are used by Volvo on several models. A common...

These standard white trim clips include foam sealing washers. They are typically used for interior or exterior trim panels such as boot linings or ...

The plastic clip that is used to secure the bonnet stay in position when not in use. These parts can easily be damaged or broken which can result i...

This yellow clip holds the bonnet rod safely out of the way when not in use. The clips can be easily damaged but are quick and easy to replace. If ...

These are the clips used on most BMW cars to secure the under bonnet insulation. The clip is a simple button fastener that pushes in and clicks in ...

These distinctive grey moulding clips are used on Hyundai and Kia vehicles to secure exterior trim mouldings. Each of the plastic fasteners include...

These distinctive blue trim clips are used on Nissan cars to attach trims and shields. One example use is as Nissan Juke exterior tailgate trim clips.

These are used to hold the fabric bonnet insulation sheets in position on the underside of the bonnet. They can get damaged or lost and this result...

These light blue clips are used on interior pillars, boot linings and some door cards across various Honda models.All of our parts are high quality...

These distinctive clips are used to hold and secure the splash guard liner around the wheel arch.

These bolts have a ridged edge that secures into a sprung nut. This type of fasteners is normally used on undertrays, bumpers, arch linings and oth...

Used on several VW cars and vans, these are also a good universal screw grommet for mounting and joining parts and panels.

These are a universal part very common on a wide range of models. The clip fits into a 5mm hole in the bodywork, while the longer canoe-shaped head...

This type of clip is normally used on shields such as wheel arch liners, bumper trims, side skirts and mudguards.

These expanding rivets are normally used to attach loose fitting panels such as wheel arch linings or splash guards. They fit into an 8mm hole and ...

These expanding plastic rivets are used on several models of Mini. The wide collared clips are normally used to hold flexible panels such as bonnet...

These clips are fitted to some Peugeot cars and vans and come in black or white. The are common on the Peugeot Partner van side moulding strips and...

This is a common screw used on body parts and trim such as wheel arch linings and bumpers.

These cable ties are used to secure wiring looms and washer hose on vehicles across the Volkswagen group range. The clip fits onto the edge of a b...

A very common 16mm long black metal spring clip used for attaching fascias, pillar covers and interior trims. The fastener is common on a wide rang...

These expanding plastic clips fit into a 5mm hole. When the centre pin is pushed in, the clip expands to lock in position. These clips are widely u...

These small white clips are used to secure trim and fascia panels on the interior of several Hyundai models.

These are a distinctive little yellow and black trim clip. They are used by Volvo on some models of V40 V60 and S60 to attach side skirts or the pl...

These make an excellent universal plastic rivet for a 6mm hole. The pin has a long barbed shaft which expands when activated and so these are suita...

These white clips are Fiat Punto scuttle panel clips. They are used on all models of the mk3 Fiat Punto to secure the plastic windscreen cowl that ...

These clips are very widely used on Fiat and Alfa Romeo cars and commercial vehicles. The clip is a simple grommet but is oblong which allows for s...

Blue trim clips almost always used to secure the windscreen cowl. This is the plastic trim sat at the bottom of the windscreen and which covers the...