[CloudSearch app] All products

Indasa double sided moulding tape is a high quality tape for professional use. The 0.8mm thick foam tape has a strong adhesive to firmly bond mould...

A metal screw with 18mm washer that is used for securing parts such as engine undertrays, splashguards and wheel arch liners.

These parts are a very high quality aftermarket equivalent to the genuine Audi part with number 8K0805121. The bolts are normally used on engine un...

These chunky plastic trim clips are used by Toyota on models such as the Mk3 RAV4 to attach the front grille. The clip expands when the centre in i...

A common and widely used interior trim panel clip. These fasteners are used by Honda to secure items such as tailgate linings, pillar covers, door ...

These blue plastic trim clips are used on several Nissan models. The clip is often used for interior trim panels such as pillar covers and boot lin...

These button clips are used to secure the rubber seals in place that run around door apertures and bonnets on some Nissan vehicles.

These distinctive and rectangular headed bolts are used as Vauxhall Corsa wheel arch flare fasteners. They are one of several parts used to attach ...

These plastic screw grommet or locknuts are very widely used on modern Vauxhall cars. The clips are fitted into the metal bodywork of the car and a...

These small, black clips are used on several VW models. They are used for different purposes for different models. One example is to attach plastic...

This is one of many different clips used by Toyota to affix the side moulding trim onto models such as the Land Cruiser Prado. The clips are colour...

These plugs fit into holes in the bodywork or in plastic side skirt or sill trims. Each clip has a small rubber o-ring seal around the stem.

These clips join the wheel arch lining or splashguard to the wing. The clips fit along the edge of the lining and then allow it to be screwed onto ...

These clips fit into a grommet mounted in the bodywork. They are used for attaching door cards and interior trim panels onto some Jaguar cars. Each...

These clips are a good alternative to the Land Rover part number YOO5098. The clip is used by Land Rover to attach windscreen cowls and interior tr...

These push fit plastic rivets are used on models such as the Jaguar XF to secure the windscreen cowl at the bottom of the windshield.

Our clips are white but the original Alfa clips can be white, yellow or green. The parts are used to attach exterior trim such as sill mouldings. T...

These black metal screws are used to attach the engine undertray to most modern Kia vehicles. The screws are heavy duty and unlikely to break but t...

These small fasteners clip into position to secure the radiator grille on some models of the Pajero, Shogun and L200. The clips are high quality af...

These small white trim panel clips are used on several Mitsubishi cars to secure small trim panels in position. Examples uses include Pajero or Sho...

These distinctive white plastic trim clips are used to attach body mouldings to several different Toyota cars including the C-HR and the RAV4. The ...

These are a very common clips fitted to most Audi and VW cars in the last 30 years. They are a standard screw grommet and are used throughout the v...

This plastic push fit clip is a standard grey rivet style fastener. They fit into an 8mm hole and are a good universal fastener that can be used fo...

These grey plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality fastener and when used in the correct s...

Each of these clips has an integrated rubber seal moulded into the design. They are used on some modern Jaguar vehicles to attach interior and exte...

These large headed black plastic rivet are used on large trim items such as bumper covers, sill mouldings and wheel arch linings.

Large headed fir tree clips that are used to hold the splash shields or wheel arch linings in place on several Nissan models. The clips have a 35mm...

These wide collared parts are used by Honda to secure the underbody trim covers, shields and insulation onto many of their modern vehicles. The cli...

Small white trim clips used to fasten parts like mirror trim covers and exterior pillar trims.

Our reflectors are produced in Austria by one of Europe's biggest brands. They are all road legal and E-Approved. This means they are suitable for ...

These small white clips have a canoe shaped head that fits inside a rubber door seal. The clip then clicks into position on the door frame to secur...

Distinctive yellow and white trim clips with a rubber seal that are used to securely mount the front and rear door cards on the Jeep Renegade. The ...

Used for interior trim panels, normally door cards or tailgate linings. These green plastic trim clips are fitted to several Hyundai cars including...

These distinctive fir tree fasteners are used on many modern Ford cars and vans. The clips are a simple barbed push fit spruce or fir tree clip. Th...

These clips are used to attach the large plastic mouldings fitted to the doors on the RAV4 (1995-2000). The clips are each fitted with a foam seali...

This is the clip that the bonnet stay attaches to when not in use. They are easy broken and if not used, can result in rattles or the support rod b...

These are simple push fit plastic rivets that fit into an 8mm hole and expand when the centre pin is inserted. The clips are used on several differ...

This clip is normally used by Subaru but is also fitted to the Toyota GT86 around the rear bumper. The clip is a simple push fit plastic rivet that...

This is a distinctive looking clip with an almost semi circular head. The clip is used by Honda on a number of different cars to attach the windscr...

These heavy duty fasteners are typically used for larger trim panels such as bumpers, under body shields, side skirts and wheel arch linings. The c...

These small plastic grommets or lock nuts are used on a range of different vehicles within the VAG group. They are used in a number of different pl...

These take an M4 screw and fit into an 8mm square hole. They are a good universal part used to fasten parts or trims to metal bodywork. This partic...

These small, grey plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the correc...

These white trim panel clips are used on some Honda models, normally to attach door sill cover mouldings. They have also been used to attach trim p...

Our reflectors are produced in Austria by one of Europe's biggest brands. They are all road legal and E-Approved. This means they are suitable for ...

Standard lock nuts or screw grommets used for mounting parts or trim to metal bodywork. These clips push into a square 8.5mm hole in the bodywork. ...

These yellow and white trim clips with a rubber seal are used to securely mount the front and rear door cards on several Fiat cars. The clips have ...