[CloudSearch app] All products

These clips are quick to install push fit clips but they can be released easily with a half turn of the screw head. The clip pin then unloads and t...

A common and widely used interior trim panel clip. These fasteners are used by Honda to secure items such as tailgate linings, pillar covers, door ...

Our range of hose connectors are available in small packs or in larger bulk purchases. They are suitable for a range of uses and are made from toug...

These screw fit plastic fasteners are used on some Fiat models normally to secure bumpers and wheel arch linings. The clips fit into an 8.5 or 9mm ...

These plastic clips are used on older VW cars such as the Mk2 Golf and Jetta. The clips are used to attach the rubber seal that runs along the edge...

These white plastic trim clips are used on several BMW 3-series models and also the E23 7-Series. The clips are used to attach the plastic moulding...

This trim panel clip is very widely used by Toyota on interior trim panels such as the pillar trims, sill mouldings and boot linings.

A standard push fit expanding plastic rivet which can be used for interior trim panels, dashboards, boot linings etc. The clip is used on many diff...

A good generic 10mm push fit plastic clip. The centre pin is pushed in to expand the clip and lock in place. These are suitable for a wide range of...

This is one of three type of side moulding clip used on the 3rd generation of VW Golf. Each moulding uses a different combination of the three clip...

Indasa double sided moulding tape is a high quality tape for professional use. The 0.8mm thick foam tape has a strong adhesive to firmly bond mould...

These metal nuts are used around the edges of wheel arch linings and some undertrays on several recent Audi models.

These chunky plastic trim clips are used by Toyota on models such as the Mk3 RAV4 to attach the front grille. The clip expands when the centre in i...

These are common on some older model Porsche cars. The clips have a crescent shaped head so they can be screwed onto the trim panel. They are used ...

An 8mm plastic fastener used by Kia to secure parts such as the front grille and bumper.

These clips are the same as part number FCP-0040 except the head is rotated 90 degrees. They are normally used as the end clip or corner clips on a...

These are very common on Volvo cars and are normally used to attach the boot or tailgate lining. The clip pushes through the trim and clicks into t...

This plastic fastener fits into an 8mm diameter hole and expands to securely lock in place when the centre pin is inserted. They are used by Audi o...

These 8mm expanding plastic rivets are used on some BMW cars, normally within the boot area or tailgate lining. The clip is a simple plastic rivet ...

These are good universal screw grommet that fits into a square hole measuring 11mm x 11mm. Fiat have used this part on several of their vehicles to...

These standard screw grommets fit into a square hole measuring 8x8mm. The parts are normally used to attach trim and parts to metal panels without ...

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Citroen models. They are used on several models normal...

These small, black clips are used on several VW models. They are used for different purposes for different models. One example is to attach plastic...

These fasteners are typically used around the engine bay on radiator and engine covers or shields.

These 8mm plug style fir tree clips are used on some models of the Ford Transit for exterior trim panels. Some Ford cars also had these clips fitte...

These small black clips are used to attach door seals and weatherstrips that run around the apertures of the vehicle. The canoe shaped end of the c...

Each of these clips has an integrated rubber seal moulded into the design. They are used on some modern Jaguar vehicles to attach interior and exte...

Black metal screws used on many different Hyundai vehicles to secure the engine undertray in position.

These twin access clips will hold hose diameters between 4 and 6mm. The clips fit into a 6.5mm hole.

These blue plastic trim clips are used to attach parts such as roof console, brake light covers, tailgate linings and pillar trims. They are used o...

Mitsubishi bonnet insulation clips used to hold the fabric sound proofing panels in position on the underside of the bonnet. These clips fit into a...

Distinctive yellow and white trim clips with a rubber seal that are used to securely mount the front and rear door cards on the Jeep Renegade. The ...

Normally used on wheel arch linings or splashguards, this grommet is also used on some models for sideskirts, windscreen cowls, bumpers and some un...

These fir tree clips are for mounting interior trim panels such as door cards. The head twists into the mounting point on the panel allowing the cl...

These screw grommet mounts have an integrated rubber seal. They are used for locating and mounting panels such as door card trims, side skirts and ...

These yellow fasteners are used on the Smart Roadster to secure the front wheel arch lining to the wing and some bumper trims in position.

These black retainers are used to secure trim in position. A common fitting location is for the windscreen cowl. This is the trim that sits below t...

These distinctive yellow plastic clips are used to secure the undertray and underbody shields to the Smart Fortwo models from 1998-2014 (model code...

These nuts have an unthreaded internal diameter of 3.9mm. The parts are normally fitted onto a coarsely threaded stud and the thread is cut into th...

These are used to attach the floor mats to a number of different Volkswagen models. The clips are used with mat sets which already have an oval sha...

This clip is normally used by Subaru but is also fitted to the Toyota GT86 around the rear bumper. The clip is a simple push fit plastic rivet that...

These chunky push fit plastic rivets are a heavy duty fastener used by Subaru. The clips are common on some of the more modern Impreza, Forester an...

These push fit plastic rivets are used to attach the windscreen cowl trim on some Honda vehicles. The clip is a normal push fit rivet which clicks ...

These small plastic grommets or lock nuts are used on a range of different vehicles within the VAG group. They are used in a number of different pl...

This plastic push fit clip is a standard grey rivet style fastener. They fit into an 8mm hole and are a good universal fastener that can be used fo...

These clear plastic and metal circular clips are used to secure the small triangular trim that sits in front of the door mirror.

This simple screw fit rivet fits into a 5mm hole and is used to fasten bumpers and other trim panels in place on some models of Peugeot cars.