[CloudSearch app] All products

These red lock nuts are used to secure underbody shields and trim panels to some Volvo models.

The small moulding clips are normally used by BMW to secure the plastic windscreen cowl in position. This is the plastic cover that runs along the ...

These door card and trim panel clips are used by Ford on a number of vehicles. In particular they are the front door card clips used on the Ford Pu...

These are used on a number of different Toyota cars from the Auris to the Avensis and up the Lexus LFA. They can be used in many different location...

These clips are used on some of the Peugeot and Citroen cars that are produced with Toyota. They are used as front and rear Citroen C1 bumper clips...

These distinctive looking trim clips are fitted to the interior trim panels and some door cards on the Transit and Transit Connect. The clips are n...

Expanding screw fit rivets such as these will normally be used wheel arch linings, bumpers, under trays and sill mouldings.

This two-part door card clip is very common on Volvo cars. The clip is used to attach the front or rear door trim card into place.

These white trim clips are used to attach interior trim covers such as the plastic sill covers on the door entrance.

These metal nuts are very widely used on the SEAT range to secure parts such as arch linings, undertrays, sill covers and bumper trims.

These clips are used by Skoda to attach plastic side skirts, sill mouldings, wheel arch flares, headlinings and other interior and exterior trims. ...

These plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the correct size hole ...

Used on interior and exterior trim panels by BMW. Examples uses includes for headlinings, door cards and boot trims.

These locking star washers are suitable for attaching underbody noise and heat insulation. The corrosion resistant parts are used throughout the Au...

These light grey screw caps have an overall diameter of 14mm. The centre hole diameter is 4.5mm.

These small, white plastic trim clips are used to secure the wheel arch flares and small trim mouldings to the bodywork on some Citroen cars and va...

Small push fit clips used by Subaru on a wide range of models. The clips are normally found on the bumper and grille but are also known to be used ...

This clip with it's accompanying grommet is used to secure trim panels such as exterior body mouldings and trims. An example use is for the exterio...

These are one of the most common Citroen clips used right across their range. At our last count these were used on at least 24 different Citroen ca...

These black metal screws are used to attach the engine undertray to most modern Kia vehicles. The screws are heavy duty and unlikely to break but t...

These small plastic rivets fit into a 4.5mm diameter hole. The clip expands when the centre pin is inserted to securely lock in position. They are ...

Our range of hose connectors are available in small packs or in larger bulk purchases. They are suitable for a range of uses and are made from toug...

These small fir tree clips are fitted to some models of Tesla and used to secure trim. One example is to attach the trim inside the frunk (front lu...

A black plastic fastener used to attach interior pillar trims, door cards and tailgate lining panels. The clip is a two part clip designed to come ...

This is a distinctive clip used on a very wide number of BMW models. The clip is used in various places but is normally on access panels found arou...

These plastic screw grommets are used around the wheel arch lining and for wheel arch trims on a number of Nissan and Infiniti cars. They are used ...

The distinctive clips are used to attach some interior side trim panels and door cards. The clip has a kind of sprung head which helps to reduce ra...

These small plastic fir tree clips are perfect for holding panels or trims in place. They fit into a fairly small 7mm hole but the wide 24mm diamet...

These screws are very common on wheel arch linings, bumpers and other shields.

These dark grey plastic rivets fit into an 8.5mm hole and are perfect for VW and Ford van linings. The clips are long and suitable for thicker ply,...

Small white plastic clips used for securing external trim mouldings into position on some modern Jaguar cars.

Our range of hose connectors are available in small packs or in larger bulk purchases. They are suitable for a range of uses and are made from toug...

These locking star washers are suitable for attaching underbody noise and heat insulation. The corrosion resistant parts are used throughout the Au...

These two part, push to fit clips are used the secure the A-pillar interior trim on several Honda models. The clip is a special design that secures...

Each of these screw grommets includes a sealing washer. The clips are typically used to attach exterior trim panels in position. An example of this...

These clips have a 7.7mm diameter shaft and are used in the wheel arch lining on some of the more recent Subaru models including the Impreza, Legac...

Used as interior door card and tailgate lining trim clips on a number of different Mercedes-Benz cars and commercial vehicles.

These are a simple and distinctive push fit expanding plastic rivet. The parts are used on lots of different vehicles for items such as arch lining...

This is a heavy duty 12mm plastic rivet. It's a chunky clip and will be used on bumpers, side skirts, undertray and other large shields.

These metal nuts have a large collar and are used to retain the wheel arch linings, undertrays and shields in position on some Ford cars and vans.

These standard push fit expanding rivets are fitted to several BMW models, typically on interior trim panels. The parts are used on items such as b...

This is another common interior trim panel clips. It's used on some modern versions of the Accord, Jazz and CR-V. The parts are typically used as d...

These long clips are used to attach upholstery and carpet in popular Nissan models such as the Qashqai. The clip has a long 40mm stem and fits into...

These trim clips are used to attach interior and exterior trim panels such as door cards, side skirts and tailgate trim mouldings. Alfa Romeo use t...

These are used to mount the bumpers on several Mitsubishi models. This part fits into a hole in the metal bodywork and the plastic bumper cover is ...

This small white plastic clip with pre-fitted rubber sealing grommets is used on the big bumper versions of the MK2 Golf and Jetta as well as the M...

This is a widely used yellow / orange clip found on the rubber weatherstrip seals and also on the door membrane. They are used on a number of diffe...

This is a very common part used on a wide range of vehicles all related to the Volkswagen Group. The clip is used for a variety of purposes from at...