BMW Car Trim Clips, Fixings and Fasteners

Widely used across the BMW range, these are very simple push pin plastic rivets that fit into an 8mm hole. BMW use them often on upholstery and car...

These 6mm blind rivets or POP rivets are used on several BMW models such as the E70 X5. The clips are used to secure trim such as wheel arch flares...

The plastic POP rivets or blind rivets are used on some BMW models to secure the wheel arch flare and wheel arch linings.

These small clips are used to attach the door sill trims or scuff plates. These trims are fitted in the door opening and are often marked with the ...

These tiny black fasteners are used to secure the trim or seals that run by the door hinges of several BMW models.

Threaded plastic nuts with a 22mm diameter collar that is used on many BMW models. This is a common part with a wide range of fitments. Used to sec...

These 6mm blind rivets are used on some BMW models which are fitted with white body-coloured trim mouldings. The clip is normally fitted to parts s...

These clips are used the attach various trims to several different BMW models. The clip has a large head and is screwed into position to hold under...

These clips fit into the original floor carpet interior of some BMW and Mini cars. The clip twists into a mounting point in the floor of the car an...

These are very widely used on modern BMW vehicles. The clips are used to join panels, mount trims, shields, bumpers, arch linings and undertrays. T...

Complex screw grommet that twists and locks in position. This part is used on most modern BMW cars and is normally used on exterior panels. Typical...

These are a very common interior door card and trim panel clip used by BMW. They are used on a wide range of models for door cards, interior trim p...

Fitted on several models, these are typically used on larger trim panels or upholstery such as bumpers, side skirts and boot linings. The clip is a...

These are used on some of the older 3-Series and 5-Series BMW models such as the E36 and E39. They are a standard 5mm push pin plastic rivet. They ...

These push fit retainer clips are used on many modern BMW cars to attach interior trim panels and door cards. The clips push in to expand and lock ...

This wide collared trim is used on loose fitting trims and insulation panels. It is common on interior carpet linings, bonnet insulations and other...

These are distinctive screw grommets used by BMW on most of their recent vehicles to secure door cards and trim panels. The clip is unusual in that...

Each of these clips come with a rubber washer pre-fitted. They are normally used by BMW to mount side skirts or sill moulding covers. They are used...

These are aftermarket replacements for the caps used to hide the bolts on the cylinder head cover of many different BMW models. They are often lost...

Door sill scuff plate clips used on many different BMW models including newly released versions. The clips are used on the plastic trims which are ...

These grey plastic trim clips are identical to BMW part number 51418224781. They are used to secure door cards, pillar covers and other interior tr...

These small parts are used with twist lock or barbed fasteners that typically hide access panels on BMW cars. This might include a panel in the boo...

These plastic expanding nuts are used on lots of different BMW cars. They can be found throughout the body and interior and used to attach panels, ...

These 8mm plastic push fit rivets are used by BMW on engine bay shields, radiator surrounds and some interior trim panels. The clip is a standard p...

This clip is very widely used across the BMW range. It is used for a lot of different purposes. Some of the parts this clip is used with include si...

These clips are one of several used to hold the various sizes and styles of side moulding bumpstrips to the vehicles. These styling strips are moun...

these brackets fit onto the sills of various models and allow the side skirts and sill trims to be positioned correctly. They are not used on all m...

This long fir tree clip fits into a 7mm hole. The clip is used on many different BMW models to secure the seat backs onto the frame. It is also use...

This clip is used on a lot of different BMW and Mini cars produced from 2000 onwards. The clip is used for many different purposes including interi...

These small plastic grommets are used on a large number of BMW models. They fit into holes in the bodywork and are normally found along the sills o...

These clips are widely used on modern BMW cars. The clip is a receiver for other parts and is normally used for underbody shields and trims such as...

These parts are used with screws to mount panels and trims. They are common on under body trays, splash guards and engine bay shields. They are use...

These are unthreaded plastic nuts that cut onto a threaded stud when first fitted. The parts are used on several different BMW models to secure par...

This plastic lock nut or expandable nut is extensively used by BMW. The part is used on most models since the 1990s and in a wide range of location...

This is a distinctive clip used on a very wide number of BMW models. The clip is used in various places but is normally on access panels found arou...

These clips are a twist lock fastener used for access panels on several BMW cars. The clip is normally used on panels in the boot or around the das...

Plastic unthreaded nut used for various purposes and widely across the BMW range. They are not threaded inside and so normally tighten onto a coars...

These small fir tree clips are used on some BMW models for securing lightweight pieces such as rubber weatherstrip seal corners or interior trim pa...

These screw grommets are used on several BMW models for many different parts. Examples include bumpers, splashguards, underbody shields and interio...

These small white plastic grommets come with integrated rubber seals. They are very common on the BMW and Mini range and are used in a wide range o...

These were used by BMW on several older models. They are a strong clip and so were typically used for larger trim panels such as bumpers, sill moul...

These white hidden trim clips are used on many BMW cars . They are almost always used to fit the plastic lining to the rear tailgate or boot hatch....

These Torx headed bolts are used on the sideskirts or plastic sill covers fitted to some BMW models. There are different lengths depending on the m...

This kit contains the two plastic headlight adjuster mountings which often break within the E39's headlights. BMW do not sell these parts separatel...

Plastic nuts used by BMW to secure loose trim items such as wheel arch linings and under body shields.

These standard push fit expanding rivets are fitted to several BMW models, typically on interior trim panels. The parts are used on items such as b...

Used on most BMW cars since 2010, these 8mm clips are normally used to secure boot linings and interior trim. The clip is a push fit rivet that exp...

These wide collared retainer nuts are used to hold shields and panels in position. This type of wide collared clip is normally used to attach flexi...