Audi Car Trim Clips, Fixings & Fasteners

These clips are normally used on or around the front bumpers and wheel arches. The clip is sometimes used with a screw through the middle to connec...

These are a distinctive expanding rivet used on the first Audi A3 to secure the top of the front bumper to the landing panel. There are four clips ...

This is a very common and very widely used clip. It's normally used on interior trims but can be for a very wide range of purposes. Door cards, pil...

This is a very common part used on a wide range of vehicles all related to the Volkswagen Group. The clip is used for a variety of purposes from at...

These clips are used with rubber grommets to attach side skirts, sill mouldings, wheel arch flares, headlinings and other interior and exterior tri...

A popular 8mm push pin rivet that is used on some Audi cars to attach splashguards, bumper covers and engine bay covers.

These metal springs are used to attach interior parts such as the interior pillar covers and door entrance sill trims.

These single use 7mm black fir tree clips are used by Audi on several different models. The clips are black with a 20mm diameter head. They are use...

These unthreaded nuts are common on modern Audi cars. They are almost always used to secure the plastic wheel arch linings. The unthreaded nut is t...

This plastic washer is used with twist lock bolts and act to hold the removable covers in place onto rear bumpers of several Audi cars. The covers ...

This small set of fixings is used on some Audi vehicle to attach the rear tow eye or tow hitch cover panel. The set includes two twist lock plastic...

These small plastic grommets or lock nuts are used on a range of different vehicles within the VAG group. They are used in a number of different pl...

These fir tree clips are for mounting interior trim panels such as door cards. The head twists into the mounting point on the panel allowing the cl...

These 6mm scrivets or screw fit plastic rivets have a Torx head and are used by Audi on a number of different vehicles. The plastic clip is fitted ...

These small white clips attach the ends of the door mechanism connecting rods that run between the various locks, handles and latches of the doors....

These are small push fit rivets used for lightweight trim. The fastener fits into a 4.5mm hole and expands when the centre pin is inserted.

These are a new style clip fitted to most Audi models after 2015. Earlier models of the Audi A3 also use this part. The clip attaches to a metal st...

These distinctive plastic rivets are used on a wide variety of VW, Audi and SEAT cars. The clip is used for many different purposes from engine bay...

Used on several older Audi models such as the C4 A6 and the D2 A8, this clip is used on interior pillar covers and boot linings. The clips have a c...

These black interior trim clips are fitted to most Audi models produced in the 1970s, 80s and 90s. They are typically used for door cards but also ...

Restagraf are a Tier 1 supplier providing original fasteners and repair kits direct to major automotive manufacturers such as Renault and the Peuge...

These clips are used to secure door seal or weatherstrips on the Audi A6 (Mk3 C6). Each clip includes a deep foam sealing washer. The parts are hig...

These white plastic clips are used on some older Audi models. They are used for attaching the exterior door trims, bumpstrips or lower protective m...

Small black metal clips which are used to secure the trim strips onto the door cards on some modern Audi cars.

These clips are used with other plastic trim clips. This hard rubber grommet fits into a hole in the bodywork. A separate clip is inserted and the ...

These are used by manufacturers in the VAG group including Porsche. They attach onto interior trim covers normally on the A, B or C pillars of the ...

These small yellow, p-shaped screw grommets or locknuts are common on modern Audi cars and normally used around the bumpers and wheel arches.

Restagraf are a Tier 1 supplier providing original fasteners and repair kits direct to major automotive manufacturers such as Renault and the Peuge...

Restagraf are a Tier 1 supplier providing original fasteners and repair kits direct to major automotive manufacturers such as Renault and the Peuge...

Used on several different VW models, this clip is also utilised on the rear bumper of the Audi TT Mk1. The clip fits into an 8mm hole and expands t...

This two-part plastic trim clip and rubber sealing grommet is used on some Audi cars to attach exterior trims including wheel arch flares, body sid...

These metal spring clips fit onto a lug on a trim panel or fascia cover. The trim is then pushed in position and the clips go into holes and secure...

A push fit plastic clip that is used to secure the weatherstrip in position on some older Audi vehicles.

A simple interior trim panel clips that is used by Audi on some of their vehicles. In particular, this is fitted to some models of the Q7 to attach...

These black plastic clips are used to hold shields, panels and covers in place for wheel arches and underbody trims.

These small plastic clips are used for attaching the rubber wind & weather seals to the bonnet opening on some Audi cars. The head of the clip ...

This metal clip is attached to the underside of the vehicle, normally to something like the subframe. The engine undertray or other underbody panel...

These are a very common screw for the interior of Audi cars.

These orange trim clips are used on some models of the Audi Q7 to attach the body mouldings that run along the side of the vehicle.

Restagraf are a Tier 1 supplier providing original fasteners and repair kits direct to major automotive manufacturers such as Renault and the Peuge...

These are used on the old Audi 100 to mount plastic exterior trim mouldings.