Products

Widely used across the VW Group, these metal spring clips are for securing fascia trims, covers and panels in position.

These black torx headed screws are used on many different SEAT models, normally to secure bumpers or wheel arch linings.

Normally used for door trim strips or other interior and exterior trim panels.

These black metal fasteners are used on the edges of bumpers, arches and underbody trim to secure panels together.

These plugs fit into holes in the bodywork or in plastic side skirt or sill trims. Each clip has a small rubber o-ring seal around the stem.

These screw grommet mounts have an integrated rubber seal. They are used for locating and mounting panels such as door card trims, tailgate linings...

This part is used on modern Ford cars and vans. The grommet is typically used for mounting front or rear lamps and bumpers.

These screw grommet mounts have an integrated rubber seal. They are used for locating and mounting panels such as door card trims, side skirts and ...

These clips with large rectangular collars are normally used to fasten the foam impact absorption panels in place behind the plastic bumper covers.

This oval shaped screw grommet is designed to mount parts and trim panels in place on the bodywork. The part is used on several Renault models incl...

An oval screw grommet widely used across the Peugeot range and across their vehicles. The grommet is used for mounting trims, panels and parts into...

These big plastic trim clips are used on some models of Smart cars to attach the trims around the front and rear bumper.

These clips are designed to attach cables ties without any need for drilling, anchors or adhesives. The small, plastic clips contain metal spring f...

These clips fit into the tailgate either side of the rear window. The parcel shelf string attaches to this clip and then the shelf lifts when the b...

These push fit plastic clips are used to suspend the parcel shelf from the boot hatch. The small clip pushes into the trim on the boot hatch either...

These parcel shelf clips are used on modern Nissan models including some versions of the Note and Qashqai. The clip fits into a hole in the tailgat...

These clips push into the trim in the tailgate or boot hatch. The centre pin is inserted and that causes the clip to expand and lock in position. T...

These clips push into the trim in the tailgate or boot hatch. The centre pin is inserted and that causes the clip to expand and lock in position. T...

These clips fit into the tailgate either side of the rear window. The parcel shelf string attaches to this clip and then the shelf lifts when the b...

These clips are used on the tailgate of the Ford Fiesta Mk5 and the Ford Fusion to attach the parcel shelf cords. The parcel shelf clips fit into t...

These clips are used on some models of Vauxhall Corsa where the parcel shelf hangs from the tailgate. This clip fits into the tailgate and the parc...

This part is easily damaged or lost but very simple to replace. The centre pin of the clip is pushed in to lock the clip in place and the parcel sh...

These push in clips are fitted to the tailgate. The parcel shelf string attaches to these clips so that when the boot is opened, the parcel shelf l...

These three part clips are used on the Nissan Juke Mk1 (F15). The clip is fitted to the tailgate and supports the parcel shelf.

These clips fit on the boot of the vehicle and the parcel shelf string hangs on them. They are often lost or damaged. The clip fits into a square h...

These are used on several models. The clip is fitted onto the interior of the tailgate. The centre pin pushes in to lock the clip in place. The par...

These are the exterior moulding clips for some models of the Peugeot 406 and 106. They are used to hold the exterior plastic trims that run the len...

Often used as interior trim panel clips, these are also used to fit the radiator grille and air intake covers on some Peugeot car models. They are ...

One Peugeot's bonnet insulation clips, this particular size is used on the 1007, 206, 207 and some of the Partner vans. The clip is a simple button...

These clips are by far the most common clip we see on Peugeot vehicles. It is fitted to at least 16 different models and is still in use on their n...

These are one of our bestselling clips that's used on Peugeot cars and vans. At our last count these were used on at least 20 different Peugeot veh...

These small plastic clips are used on several Peugeot cars to hold rubber sealing strips in place around the entrances in the vehicle body. The hea...

A black plastic fastener used to attach interior pillar trims, door cards and tailgate lining panels. The clip is a two part clip designed to come ...

These blind rivets are made from plastic. They fit into a 6mm hole and are common on a range of modern BMW & Mini vehicles. The rivets are comm...

These blind rivets are made from plastic. They fit into a 6mm hole and fit on some Mini cars. The rivets are commonly found on wheel arch trim and ...

These plastic nuts are used to join the edges of two panels. They are commonly used by Toyota to join the wheel arch lining to the edge of the whee...

These plastic pop rivets or blind rivets are fitted using a rivet gun and are normally used for exterior trim panels such as wheel arch trims and s...

The plastic POP rivets or blind rivets are used on some BMW models to secure the wheel arch flare and wheel arch linings.

Used in a wide variety of location from bumpers, to arch linings and upholstery. This black plastic blind rivet fits into a 6mm hole.

These 6mm scrivets or screw fit plastic rivets have a Torx head and are used by Audi on a number of different vehicles. The plastic clip is fitted ...

Threaded plastic nuts with a 22mm diameter collar that is used on many BMW models. This is a common part with a wide range of fitments. Used to sec...

Commonly used to secure plastic panels and trim such as windscreen cowls, arch linings and underbody shields.

Common on several Mazda models, these clips are normally used on bumpers undertrays, sill mouldings or other large panels and shields.

These plastic fasteners are used on underbody shields and covers.

This clip is used by Mazda to secure the rubber seal that runs along the front or rear side of the bonnet. It's used on most modern Mazda cars incl...