Products

A very common 16mm long black metal spring clip used for attaching fascias, pillar covers and interior trims. The fastener is common on a wide rang...

A very common 16mm long black metal spring clip used for attaching fascias, pillar covers and interior trims. The fastener is common on a wide rang...

These small black clips have a rectangular head that slides onto the back of the trim panel. They are used by VW to secure small trim panels such a...

This two part clip includes the black centre pin and the insert grommet that goes into the bodywork. The parts should be fitted assembled but will ...

These are used on some interior trim panels on a few Seat models. They are sometimes used for carpet lining or upholstery trims around the dashboar...

These clips are used on pillar trims across a lot of the VW, Audi, Seat, Skoda and Porsche ranges. There is an identical clip available in white al...

These are not as common on Skoda vehicles but they are used to attach some interior trim panels normally in the boot area or under the dashboard.

This is a two-part clip that is only designed to come apart on disassembly. It is normally used on interior panels such as sill covers, boot lining...

These small pin clips are used on interior trims such as the door sill cover.

Black trim panel clips used on some models of Mini to attach and secure interior trim panels such as pillar covers, tailgate linings and other inte...

This two-part clip is used on several different Mercedes cars to attach interior trim panels. The fastener comprises a rubber insert grommet that f...

These are a very common screw for the interior of Audi cars.

This is an extremely common screw on the interiors of Skoda cars. They are typically used for boot linings, door cards, sill covers, pillars and ta...

These clips are used with a snapsac grommet that fits into the bodywork. They are fitted to at least four different Land Rover vehicles and used to...

These are positioning grommets that fit into the bodywork of the car. The tail lights have lugs on them that then fit into these grommets.

These clips are used across the Land Rover range to attach side skirts, radiator grilles, bumpers, undertrays and wheel arch linings. The clips are...

There are lots of variations of the Land Rover Defender but these clips were used quite consistently to mount the interior door trim panels from 19...

These were used by Land Rover to fit Defender interior trim panels. They are a basic fir tree clip and so will also be suitable for other purposes.

Interior trim panel clips used on the Discovery Mk1 and Mk2. These clips work with a snapsac which fits into the metal bodywork. These are specific...

Used to attach exterior pillar trims on several Land Rover models. These small black grommet fit into holes in the bodywork of the main body.

A large plastic rivet that fits into a 22mm diameter hole. The push fit fastener is used on models including the Toyota Prius and the Lexus CT200H ...

Used to hold the plastic wheel arch linings / splash guards in place on some models of Vauxhall and Opel vans. The large diameter head is flexible...

These clips fit into a square hole and have a large covering head. The clip is used by VW for securing large plastic trim panels such as windscreen...

These fasteners are typically used around the engine bay on radiator and engine covers or shields.

This twist lock pins pass through a larger clip and the arch lining to secure the lining in position.

These are used on several Honda models to attach bumpers, side skirts, radiator grilles and underbody shields. The clips are a simple 10mm push fit...

These are a universal product suitable for any car requiring these dimensions. The clip helps safely route wiring looms, cables or brake hose to pr...

These are a very common size of body screw across all manufacturers. We list them here for BMW equivalent to their part number 07147129160. They ar...

This small M5 screw is used to secure dashboard parts and also the front bumper on several different Skoda cars.

This bolt is common on interior panels around the boot and tailgate as well as on the bumper of some models.

These 30mm long bolts are used by VW on the front bumpers and radiator support of several models.

These fir tree clips are used to secure the under bonnet sound proofing insulation on most Mazda cars since around 2003. The clips fit in a 5.5mm h...

These rectangular collared retaining clips are normally used for the foam bumper impact absorption panels fitted behind the bumper covers.

This clip is very widely used across the Mazda range. It is used on everything from interior trim panels to bumpers, engine bay shields and wheel a...

Expanding screw fit rivets such as these will normally be used wheel arch linings, bumpers, under trays and sill mouldings.

Widely used across the Mercedes-Benz range of cars and vans, these are very simple push pin plastic rivets. They are fitted to Mercedes upholstery ...

Fitted to several Mercedes-Benz cars and commercial vehicles, these plastic push fit rivets have a wide collar and are normally used on loose fitti...

These push fit expanding plastic rivets are used on many different Mercedes models. The clip fits into a square or rectangular hole and the centre ...

These are small push pin plastic rivets used on some Mercedes-Benz cars, vans and commercial vehicles. They are used for lightweight trim panels an...

These metal spring clips are used to hold interior trim and fascia panels in position around the dashboard.

Small, black metal edge clips used to fasten plastic parts such as wheel arch linings and wheel arch trims. The clip fits over the edge of two piec...

These steel fasteners are used to attach some exterior trim and body parts such as bumpers and radiator grilles.

These black metal spring clips are used to hold on interior trim covers including on the pillar covers around the windows.