Skip to content

Covered Brass Nut for Side Protectors & Mouldings- Honda 75307-SN7-000

SKU: FCP-0547-HO1

• High quality OE equivalent part

• Widely used on older Honda cars

• Available in bulk

Original price €0
Original price €5,95 - Original price €16,95
Original price
Current price €5,95
€5,95 - €16,95
Current price €5,95
Title: Pack of 10
These 10mm threaded brass nuts are used on many older Honda vehicles for attaching side mouldings, window pillar strips and various other trims. They are increasingly hard to find and normally very expensive when the original parts are bought direct from Honda. Many of our parts come from the same factories as the OE pieces and we ensure the quality is just as good as the main dealer parts.

Honda Part Number: 75307SN7000

Colour: Black

Front Grille or Slam Panel

You may also like

Honda Windscreen Cowl Clip, 91508-S50-003

Original price €5,95 - Original price €15,95
Original price
€5,95 - €15,95
€5,95 - €15,95
Current price €5,95

These push fit plastic rivets with foam washers, are used on some Honda vehicles to attach the windscreen cowl. This is the piece of plastic trim t...

View full details
Original price €5,95 - Original price €15,95
Original price
€5,95 - €15,95
€5,95 - €15,95
Current price €5,95

Edge Nut / U-Nut for Trim Panels, Undertrays & Shields, Honda 90308-SB2-013

Original price €5,95 - Original price €14,95
Original price
€5,95 - €14,95
€5,95 - €14,95
Current price €5,95

These edge nuts are used to attach parts such as engine undertrays, bumpers, splashguards and interior trim on Honda cars as well as fairings and c...

View full details
Original price €5,95 - Original price €14,95
Original price
€5,95 - €14,95
€5,95 - €14,95
Current price €5,95

Honda Roof Rain Channel /Gutter / Drip Moulding Fastener Clip 91528SR4003

Original price €5,95 - Original price €16,95
Original price
€5,95 - €16,95
€5,95 - €16,95
Current price €5,95

Used on a few different models, these attach the trims that run along the roof edge. They are normally known as drip mouldings or rain channel trim...

View full details
Original price €5,95 - Original price €16,95
Original price
€5,95 - €16,95
€5,95 - €16,95
Current price €5,95

Plastic Covered Brass Nut, Land Rover DYH10042L

Original price €5,95 - Original price €16,95
Original price
€5,95 - €16,95
€5,95 - €16,95
Current price €5,95

These nuts are used on some Land Rover models to attach trim panels and body parts. One example use is Range Rover P38 Side Body Moulding Strip nut...

View full details
Original price €5,95 - Original price €16,95
Original price
€5,95 - €16,95
€5,95 - €16,95
Current price €5,95

Rubber Seal Weatherstrip Clips, Cowl Vent Bonnet Seal Clips- Honda 91502-S84-A11

Original price €5,95 - Original price €14,95
Original price
€5,95 - €14,95
€5,95 - €14,95
Current price €5,95

These are used for attaching rubber seals to apertures on several Honda cars. They are normally used on the rubber seals at the front or rear of th...

View full details
Original price €5,95 - Original price €14,95
Original price
€5,95 - €14,95
€5,95 - €14,95
Current price €5,95
vehicleclips.co.uk
4.9
734 reviews on
Cliff_image
1 year ago
Verified
Very good the item arrived quicker than I expected. I only bought a pair of seatbelt stoppers, fitted one and it looks very OEM. Fitting instructions if you are not sure how to fit these, but please read anyway. (EXTREAMLY IMPORTANT) DO NOT cut a hole in your seatbelt it WILL weaken it and make it more likely to fail when you need it most. Rather, poke a SMALL hole through the centre of the seatbelt at the required height using something with a sharp point, like a thick needle to spread the fibers apart WITHOUT cutting them, only enough to make a SMALL hole, make sure the seatbelt buckle is above the hole (Hint: press the stud through so that the flat side of the seatbelt stopper faces toward the inside of the car and the nipple faces the outside) and then push the stud with the nipple on it through the webbing making sure the fibres of the seatbelt go around the nipple. This can be quite difficult but only make the hole just big enough to allow the nipple to squeeze through, I cannot stress this enough, DO NOT be tempted to cut the fibres to make the hole bigger. Take the backing plate (the one with the hole in it) and place it over the nipple and press hard, this takes considerable force, DO NOT use pliers', if necessary use two small pieces of wood or something similar that isn't going to damage the seatbelt or the stopper to allow you to press it closed, you will feel and hear? it click closed, job done, sit back and admire your handiwork it should look very OEM. REMEMBER THE SEATBELT IS THERE TO SAVE YOUR LIFE SO DO NOT DAMAGE IT.
Show more
A reviewer_image
1 year ago
Verified
VehicleClips is a first class company with exemplary service and products. I have purchased a number of fittings for a Range Rover L322 and new VW Beetle. The website is very intuitive to use especially if you have an idea of the parts outline dimensions or a manufacturer part number. The items always arrive very quickly (almost before you've thought to order the part!) and for the high quality are very inexpensive. When I need replacement fixings VehicleClips is always the first company I go to.
Show more
A reviewer_image
2 years ago
Verified
VehicleClip's provide a fantastic service and excellent products. The website is easy to use and has very useful dimensional specifications which I used to compare and select the fixings required. This review is for the first purchase, followed by a second for another fastener and in both cases the products were perfect. The items were very competitively priced and postage was free, packages arriving within 24-48hrs of ordering, brilliant!
Show more
A reviewer_image
2 years ago
Verified
I placed my order with VehicleClips, despite receiving slightly cheaper offers from elsewhere, because the company provided fully dimensioned sketches of each of its products that enabled me to place my order confident in the knowledge that I had chosen the correct clips. An emailed confirmation order was received within seconds with a follow-up confirmation of dispatch, (complete with a tracking reference), issued on the first working day following my order. The clips were despatched using Royal Mail's standard service and arrived two days later. They were easy to install and fitted perfectly. Thank you, VehicleClips. I couldn't have wished for better service.
Show more
A reviewer_image
2 years ago
Verified
I needed to replace some clips in my elderly Ford C Max, which had disintegrated whilst removing an internal panel. From my vague description, Richard searched , not only Ford parts, but other manufacturers, to identify those I needed. Without doubt this company, and its employees represent the very best of British businesses, for service, communication, and speedy delivery. Absolutely amazing in this day and age
Show more
A reviewer_image
2 years ago
Verified
Excellent service. Very reasonable price and the clips were dispatched delivered very quickly.. I’ll be using VehicleClips again. My only extremely minor criticism is I needed these clips for a Subaru but couldn’t find them listed. I did a search using the dimensions of the broken clips I had and found them that way but they were listed as being for a Mitsubishi. This is nit picking though. Overall couldn’t fault the price and service.
Show more