Citroen Car & Van Trim Clips, Fixings & Fasteners

These distinctive plastic clips with a curved head and integrated rubber seal are fitted to the Fiat Ducato, Citroen Relay and Peugeot Boxer. The c...

These clips are by far the most common clip we know of on Citroen cars and vans. It is fitted to at least 20 different models and is still in use o...

These plastic trim clips are used on lots of different Citroen models since 2002 and are still fitted to current models in 2019. The clips are used...

These exterior moulding clips are used on a wide range of Citroen cars and vans. They are normally used to attach the plastic mouldings that run al...

These blue Citroen trim panel clips are widely used to attach interior trim panels across the Citroen range. The clips are used in different places...

These are an easy to recognise trim clip fitted in plenty of modern Citroen cars and vans. They are used to fix front and rear door card trim panel...

These small green fasteners are used on some recent Citroen models such as the C3. The plastic trim clips are used to attach the exterior trim moul...

These clips are used on some Citroen models to attach exterior trims such as those that run along the side of the door or the lower protective plas...

These are a very common interior and exterior trim panel clip used by Citroen. Our aftermarket alternatives are a high quality replica produced to ...

This part is easily damaged or lost but very simple to replace. The centre pin of the clip is pushed in to lock the clip in place and the parcel sh...

These white trims clips are normally used on the interior trims. Citroen use these as door card clips, tailgate lining clips and boot lining fasten...

These Torx head bolts are used on several Citroen models for securing bumpers and other major body parts.

These clips are normally used for attaching exterior trim panels to the bodywork. This includes side moulding strips, tailgate trims, protective mo...

These are more commonly found on Toyota cars but are also used by Citroen on vehicles that they have produced in collaboration with the Japanese ca...

These are one of the most common Citroen clips used right across their range. At our last count these were used on at least 24 different Citroen ca...

These clips are fitted to a lot of Citroen cars and vans. The bonnet prop rod is held in this clip when it is folded down and not in use. They are ...

These clips are used on some of the Peugeot and Citroen cars that are produced with Toyota. They are used as front and rear Citroen C1 bumper clips...

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Citroen models. They are used on several models normal...

These bolts have a ridged edge that secures into a sprung nut. This type of fasteners is normally used on undertrays, bumpers, arch linings and oth...

Moulding clips used to attach trim panels and pillar covers on the inside and out side of the vehicle.

These small black clips are used to attach door seals and weatherstrips that run around the apertures of the vehicle. The canoe shaped end of the c...

These small, white plastic trim clips are used to secure the wheel arch flares and small trim mouldings to the bodywork on some Citroen cars and va...

These 6.5mm fir tree clips used by Peugeot and Citroen have an 18mm head. The black clip is used in lots of different places depending on the car. ...

Commonly used by Peugeot and Citroen for wheel arch linings, splashguards and bumpers, this clip is also found on windscreen cowls, engine undertra...

This distinctive trim clip with rubber seal is used on some Citroen cars and vans including the Berlingo to attach the exterior protective moulding...

Small black plastic clips used to attach the rubber door seals on some models of the Citroen C5. These clips are still current and so may be fitted...

This yellow clip holds the bonnet rod safely out of the way when not in use. The clips can be easily damaged but are quick and easy to replace. If ...

These oval grommets are used for mounting and positioning parts such as pillar covers, sill entrance covers and any other trim panels and upholster...

Typically used by Citroen on front and rear bumpers, this part is more often seen on Toyota cars. The clips is fitted to the C1 which was produced ...

These orange plastic trim fasteners are used on multiple Citroen cars and vans. The clip is used in different places on different models. Locations...

These sprung nuts are used to hold a barbed metal pin. They are normally used on under body shields and protective panels. They are extremely commo...

These are widely used across the Citroen and Peugeot range. The clip is oval shaped and is used all over the vehicles. The shape of the clip allows...

These are fitted to some Citroen cars and vans, in particular the C-Crosser which uses them throughout. They are typically used as wheel arch linin...

These 6mm fir tree clips are used on many Citroen cars to fasten bonnet insulation, boot linings and wheel arch splash guards. The clips fit into a...

These clips are simple barbed fasteners that are used on a range of vehicles to secure trim such as splash guards, wheel arch linings, boot linings...

These push fit rivets are used on some Citroen models that are made in conjunction with Mitsubishi. They are used to attach larger trim panels such...

These are used on several modern Citroen cars. The clips are normally fitted as door card clips, tailgate lining and interior pillar cover fastener...

These clips have a distinctive Torx style head on them. The clips fit into a 6mm hole and are used on interior and exterior trim panels such as bum...

Bonnet insulation is the sheet of fabric that is often fitted to the underside of the bonnet. On many Citroen cars and vans, this clip is used to s...

Often used on wheel arch linings or splash guards, these clips are also fitted to upholstery panels such as boot linings and bonnet insulation.

A small screw grommet or lock nut used on a lot of different Citroen and Peugeot cars. These clips are used all over the vehicles for everything fr...

These clips are widely used by Citroen and Peugeot and come in black or white. The clips are normally used for exterior trims such as wheel arch fl...

These white clips are used on a few different Citroen cars. They are used for interior and exterior trims fitted to the tailgate and also for grill...

These are very common on a number of Citroen cars being used as wheel arch lining clips, underbody fasteners and bumper panel retainers. They are a...

Blue plastic clips with a sprung head used to secure exterior side body moulding strips onto vehicles such as the Citroen C4 Cactus.

These are very common across the Citroen range. They fit into a 6mm hole and are used for securing lightweight plastic trims. The clip has a distin...

These are not widely used by Citroen but they are fitted to some models. They are typically used as wheel arch lining clips or bumper fasteners.

Used on several different Citroen cars, these clips are typically used on interior trim panels. They are commonly used as door card clips, side tri...