Peugeot Car & Van Trim Clips, Fixings & Fasteners

The exterior protective trims fitted to the mk2 and mk3 Peugeot Boxer are secured to the bodywork using these plastic clips. Each clip has an integ...

These blue Peugeot trim panel clips are widely used to attach interior trim panels across the range. The clips are used in different places on diff...

These clips are by far the most common clip we see on Peugeot vehicles. It is fitted to at least 16 different models and is still in use on their n...

These are an easy to recognise trim clip fitted in plenty of modern Peugeot cars and vans. They are used to fix front and rear door card trim panel...

These plastic trim clips are used on lots of different Peugeot models since 2003 and are still fitted to current models in 2019. The clips are used...

These exterior moulding clips are used on a wide range of Peugeot cars and vans including the 1007, 106, 206, 207, Expert etc . They are normally u...

These white plastic trim clips are used as Peugeot moulding clips to attach exterior trims such as those that run along the side of the door or the...

These clips push into the trim in the tailgate or boot hatch. The centre pin is inserted and that causes the clip to expand and lock in position. T...

These Torx head bolts are used on several Peugeot models for securing bumpers and other major body parts.

These clips are used on some of the Peugeot and Citroen cars that are produced with Toyota. They are used as front and rear Peugeot 107 bumper clip...

These are one of the most commonly used trim clips across the Peugeot range. These white plastic trim clips are used to fit a multitude of differen...

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Peugeot models. They are used on several models normal...

These are one of our bestselling clips that's used on Peugeot cars and vans. At our last count these were used on at least 20 different Peugeot veh...

These clips are fitted to many Peugeot cars and vans. The bonnet prop rod is held in this clip when it is folded down and not in use. They are quit...

These are used on several models. The clip is fitted onto the interior of the tailgate. The centre pin pushes in to lock the clip in place. The par...

These are a small black plastic clip used to attach rubber seals around the door openings on some Peugeot models. The fasteners have a flat head wh...

This simple screw fit rivet fits into a 5mm hole and is used to fasten bumpers and other trim panels in place on some models of Peugeot cars.

These small plastic clips are used on several Peugeot cars to hold rubber sealing strips in place around the entrances in the vehicle body. The hea...

Used on the Peugeot Partner vans, these moulding clips are used to attach the plastic exterior trims that run along the sides and rear of the vehic...

These are more commonly found on Toyota cars but are also used by Peugeot on vehicles that they have produced in collaboration with the Japanese ca...

Oval screw grommets or trim locators used widely on Peugeot cars and vans. Typically found with parts such as pillar covers, door cards, centre con...

These clips are fitted to some Peugeot cars and vans and come in black or white. The are common on the Peugeot Partner van side moulding strips and...

These clips are fitted to some Peugeot and Citroen models that are produced with Mitsubishi parts. It is a simple 9mm push fit plastic rivet that i...

Small white plastic trim clips that are each pre-fitted with a removable foam washer. These type of clips are normally used for securing small trim...

These white hidden clips are used to attach interior trims onto several Peugeot vehicles. They are used to fasten interior trim panels such as door...

These clips are used on a few of Peugeot models that were produced in the 1980s and 1990s. The clips were used to attach door card linings and inte...

This yellow clip holds the bonnet rod safely out of the way when not in use. The clips can be easily damaged but are quick and easy to replace. If ...

Very small white plastic clips used on a few older Peugeot cars and vans. The clip is normally used for installing small body moulding trims either...

An oval screw grommet widely used across the Peugeot range and across their vehicles. The grommet is used for mounting trims, panels and parts into...

These sprung nuts are used with a ridged or barbed metal bolts. The bolt pushes into this sprung nut and is held securely. These are used on protec...

These 6.5mm fir tree clips used by Peugeot and Citroen have an 18mm head. The black clip is used in lots of different places depending on the car. ...

These grey plastic trim clips are used to attach the Peugeot 308 side mouldings that run on the outside of the doors along the side of the vehicle....

These are a very distinctive clip used by Peugeot. The push fit clips have a cross-shaped centre pin which pushes in to engage the fastener. Peugeo...

Peugeot use these parts on some of their interior trims and also on bumpers. The clip has a distinctive Torx head.

These clips are used on several Peugeot and Citroen models including cars and vans. On some vehicles they are used as side moulding clips and on ot...

These clips are used on some models of the Peugeot 307 to attach the tailgate lining and some of the interior trim panels on the side of the car.

These barbed clips are used on some older Peugeot cars to attach the exterior mouldings that run along the side of the vehicle. Applications includ...

These 6mm plastic fir tree clips are used to fasten bonnet insulation, wheel arch linings, splashguards and windscreen cowling into position on a l...

This clip is used on some Peugeot cars and vans to secure trim panels and upholstery. Typical uses include boot carpet lining, bonnet soundproofing...

A small white lokut nut used on many different Peugeot cars and commercial vehicles. This type of plastic clip is used to position parts, panels an...

Commonly used by Peugeot and Citroen for wheel arch linings, splashguards and bumpers, this clip is also found on windscreen cowls, engine undertra...

These are fitted to several Peugeot cars. They are nearly always used to attach front and rear door card trim panels.

One Peugeot's bonnet insulation clips, this particular size is used on the 1007, 206, 207 and some of the Partner vans. The clip is a simple button...

Locking clips that are used throughout Peugeot vehicles to secure parts such as floor mats, boot linings and sound insulation. The clips are distin...

These plastic trim clips are used on several models in the Peugeot range. They fit into a 6mm hole and are used for securing lightweight plastic tr...

These are simple expanding rivets. Normal uses include bumpers, side skirts, wheel arch linings. A specific example is that Peugeot use these as Pe...

This style of interior trim clip is increasingly common on modern cars. Each one has a metal spring clip built into the plastic housing to hold it ...

These are used with a sprung nut that hold the bolt in place and secures the panel that it is securing. Both can be easily lost or knocked off. The...