Nissan Car & Van Trim Clips, Fixings & Fasteners

Very widely used clip by Nissan. Common on most models and used on bumpers, arch linings, radiator grilles, engine shields, windscreen cowls etc. T...

These clips are a high quality replacement identical to the OE parts. Nissan use these plastic push fit rivets for a variety of uses. They can be f...

These clips are a perfect fit to replace any damaged or missing fasteners on the Qashqai lower door seals. The rubber strip runs along the bottom o...

These small trim clips are used by Nissan and Infiniti for attaching the plastic surround on the wheel arch. They are used on the front and the rea...

These short clips are normally used for fastening bumpers, grilles, sill moulding trims and radiator covers in place. The clips have a mottled fini...

This is a pack of 10 high quality replacement trim clips for the Nissan Qashqai (2014 on) rear door seals. The rubber door seal is at the top of th...

These 10mm push fit rivets are used on many different Nissan cars. Typical use is on bumpers, mudguards, side skirts or wheel arch linings.

One of the most common clips on modern Nissan cars and vans, this is used on many different types of interior trim. The clips are used to attach do...

These white interior trim panels clips are normally used on parts such as door cards, tailgate linings, pillar covers and side panels. They are use...

These small and distinctive yellow plastic trim clips are used to attach the wheel arch trims or flares onto several Nissan models. These include t...

These three part clips are used on the Nissan Juke Mk1 (F15). The clip is fitted to the tailgate and supports the parcel shelf.

These bumper bracket clips are used on some modern Nissan and Renault models. An example use is Nissan Qashqai rear bumper clips. The clips are a h...

Widely used on modern Nissan cars and vans, these clips are normally used for bumpers, grilles, undertrays and wheel arch liners. The clips are a s...

These large screw fit plastic fastenings fit into a 12mm hole. They are used on some vehicles to attach underbody shields and other large plastic t...

This small clip is used on the Nissan Juke and the Nissan Teana to hold the sill mouldings in place at either end. The small clip includes a foam s...

These clips are originally a Renault part. They are often fitted by Nissan on some of the vehicles developed jointly with Renault. They are a stron...

These are standard screw grommets used for mounting trims and parts into position on the bodywork. These fit into a 10mm x 10mm square hole in the ...

These yellow trim panel clips are used on both interior and exterior trim panels. Some Nissan models use them for panels such as interior pillar co...

These clips fit on the boot of the vehicle and the parcel shelf string hangs on them. They are often lost or damaged. The clip fits into a square h...

These small trim clips are used by Nissan and Infiniti for attaching the plastic surround on the wheel arch. They are used on the front and the rea...

this grey plastic grommet fits into the metal bodywork of the vehicle. A second clip attached to the wheel arch flare or wheel arch trim is then pu...

These plastic screw grommets are used around the wheel arch lining and for wheel arch trims on a number of Nissan and Infiniti cars. They are used ...

These long clips are used to attach upholstery and carpet in popular Nissan models such as the Qashqai. The clip has a long 40mm stem and fits into...

These small black plastic clips are used on some Nissan models to attach the plastic side mouldings onto the car. Each clip includes a foam sealing...

These plastic retaining clips are used to attach trim panels onto sills and apertures such as the boot. They are used on the Nissan Micra K12 to at...

These parcel shelf clips are used on modern Nissan models including some versions of the Note and Qashqai. The clip fits into a hole in the tailgat...

These button clips are used to secure the rubber seals in place that run around door apertures and bonnets on some Nissan vehicles.

These blue plastic trim clips are used on several Nissan models. The clip is often used for interior trim panels such as pillar covers and boot lin...

These black retainers are used to secure trim in position. A common fitting location is for the windscreen cowl. This is the trim that sits below t...

These clips join the wheel arch lining or splashguard to the wing. The clips fit along the edge of the lining and then allow it to be screwed onto ...

This push fit plastic rivet is fitted to modern Nissan cars normally as a bumper, wheel arch or engine shield retainer. The clip is a simple expand...

These distinctive blue trim clips are used on Nissan cars to attach trims and shields. One example use is as Nissan Juke exterior tailgate trim clips.

These white plastic chimney nuts, speed nuts or screw grommets are used on several Nissan cars including all models of the X-Trail. The clips are u...

Large headed fir tree clips that are used to hold the splash shields or wheel arch linings in place on several Nissan models. The clips have a 35mm...

These parts are used on several Nissan models- normally to secure door cards, trims and interior pillar covers.

This type of part is for mounting trims, panels or parts onto metal bodywork. The grommet fits into a hole in bodywork. The part is then aligned wi...

Small 6mm screw fit plastic fasteners also known as scrivets. These clips are used to fasten interior and exterior trim panels such as pillar trims...

These are used on a few different vans. They are there to hold the protective plastic mouldings onto the lower sides and rear doors. They are almos...

These distinctive, pale blue clips are used on some models of the Nissan X-Trail to attach the side moulding strips on to the exterior of the car. ...

These 28mm round clips are used to attach the bonnet or hood insulation on many different models produced by Nissan and Infiniti. They can be fitte...

These white trim panel clips are used on several different Nissan models including the Nissan Leaf. The clips are used to attach interior pillar tr...

A simple plastic push fit rivet that goes into a 6mm hole. The centre pin pushes in to hold in place. These small and lightweight clips are normall...

This plastic mounting clip with sealing washer is normally used to join bumper covers to the front or rear wings. These clips sit in the metal body...

Plastic screw fit rivets that expand when the centre pin is pushed or screwed in. This clip has a mottled patterned head and is used on several old...

These small clips are used on several Nissan models to secure the radiator grille in place. There are a few similar looking clips made by Nissan so...

These distinctive black plastic clips have a 10mm hexagonal head. The clips are used on some older Nissan vehicles for attaching engine undertrays,...

A 6mm plastic clip used for fastening lightweight trim panels and shields.

These distinctive clips are used to hold bonnet insulation panels in place on a wide number of Nissan models. The barbed stem of the clip fits into...