VVO

This snapsac insert is used in conjunction with a number of other parts on Land Rover and Range Rover vehicles. The snapsac is pushed into the meta...

A large plastic rivet that fits into a 22mm diameter hole. The push fit fastener is used on models including the Toyota Prius and the Lexus CT200H ...

Used to hold the plastic wheel arch linings / splash guards in place on some models of Vauxhall and Opel vans. The large diameter head is flexible...

These clips fit into a square hole and have a large covering head. The clip is used by VW for securing large plastic trim panels such as windscreen...

These fasteners are typically used around the engine bay on radiator and engine covers or shields.

These plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the correct size hole ...

This twist lock pins pass through a larger clip and the arch lining to secure the lining in position.

These small locknuts are used on the bodywork to attach trim panels and covers. Example uses for this particular clip are on sill covers and door l...

These are used on several Honda models to attach bumpers, side skirts, radiator grilles and underbody shields. The clips are a simple 10mm push fit...

These long fir tree clips are used on some models of the Renault Kadjar to secure trim panels and carpet in the boot area. They fit into an 8.5mm h...

These long clips are used to attach upholstery and carpet in popular Nissan models such as the Qashqai. The clip has a long 40mm stem and fits into...

These are a long stemmed fir tree clip and normally used for interior trims and panels in off road and commercial vehicles. They are used on a numb...

These dark grey plastic rivets fit into an 8.5mm hole and are perfect for VW and Ford van linings. The clips are long and suitable for thicker ply,...

These light grey plastic rivets fit into an 8.5mm hole and are perfect for VW and Ford van linings. The clips are long and suitable for thicker ply...

These are a universal product suitable for any car requiring these dimensions. The clip helps safely route wiring looms, cables or brake hose to pr...

These small white clips are used to attach the lower door moulding trim onto the G11 7-Series. The clips are not sold separately by BMW who would n...

These distinctive, pale blue clips are used on some models of the Nissan X-Trail to attach the side moulding strips on to the exterior of the car. ...

These small clips are used on lots of different Mercedes models. The lower weatherstrip clips are used on some models of the SLK, CLK, E-Class and ...

These distinctive clips are used to hold on moulding trim strips normally at the bottom of doors.

These are a very common size of body screw across all manufacturers. We list them here for BMW equivalent to their part number 07147129160. They ar...

This small M5 screw is used to secure dashboard parts and also the front bumper on several different Skoda cars.

This bolt is common on interior panels around the boot and tailgate as well as on the bumper of some models.

A common bolt used across the VW range for items such as hinges, wings and other bodywork.

These 30mm long bolts are used by VW on the front bumpers and radiator support of several models.

These M6 nuts are normally used along the underside of the bumper or sill to attach undertrays or trims.

These are a standard, steel M6 bolt with a captive washer. They are used for securing body panels such as outer wings.

These fir tree clips are used to secure the under bonnet sound proofing insulation on most Mazda cars since around 2003. The clips fit in a 5.5mm h...

These distinctive white trim clips are used on the first generation of the Mazda CX-5 to secure the plastic trim that runs around the edge of the w...

This interior trim panel clip is widely used by Mazda. The clips are normally used on door cards but will also be found on boot linings, pillar tri...

These rectangular collared retaining clips are normally used for the foam bumper impact absorption panels fitted behind the bumper covers.

These grey fasteners have a large rectangular collar. They fit into a 10mm hole and expand when the centre pin is inserted. They are used to attach...

This clip is very widely used across the Mazda range. It is used on everything from interior trim panels to bumpers, engine bay shields and wheel a...

These green plastic moulding clips come with foam sealing washers. They are an identical and high quality alternative to the genuine Mazda part num...

A common clip used by Mazda for attaching side skirts, sill mouldings and other plastic trims around the vehicle. These are very common on side ski...

These small plastic clips are used on weatherstrip seals and rubber aperture seals. The clip head fits inside the rubber seal and then the stem of ...

Expanding screw fit rivets such as these will normally be used wheel arch linings, bumpers, under trays and sill mouldings.

Interior door and trim panel clips commonly used by Mercedes. They can found on a range of different models and often used for different purposes i...

Widely used across the Mercedes-Benz range of cars and vans, these are very simple push pin plastic rivets. They are fitted to Mercedes upholstery ...

These clips are used to attach the protective plastic moulding trim panels that are fitted to the exterior of some models of Mercedes-Benz Sprinter...

Used as interior door card and tailgate lining trim clips on a number of different Mercedes-Benz cars and commercial vehicles.

Fitted to several Mercedes-Benz cars and commercial vehicles, these plastic push fit rivets have a wide collar and are normally used on loose fitti...

These push fit expanding plastic rivets are used on many different Mercedes models. The clip fits into a square or rectangular hole and the centre ...