vvo

This clip is often used by BMW and was used on some MG Rover cars made whilst it was owned by BMW. They are used for door cards, interior trim pane...

This fastener is used to secure the door entrance sill moulding or scuff plate trims. This particular clip is used on many different models from th...

The push to fit clip is used to attach the door glass exterior seal. The seal is also known as the scraper seal as it is the seal that rubs against...

These are side moulding clips used on a variety of BMW E36 3-series models. They are used to hold the exterior bump strips in place that run the le...

These clips are used to attach the large plastic mouldings fitted to the doors on the RAV4 (1995-2000). The clips are each fitted with a foam seali...

These small white plastic trim clips are used to secure parts such as the lower door mouldings, sill scuff plates, wheel arch flares and side body ...

Grey plastic trim clips with a foam sealing washer. The plastic fasteners are used on several Mazda models. They are in different places depending ...

These small white clips are used to secure the rubber seals that run around the door and boot hatch openings on several Vauxhall cars. They are use...

These clips are used to secure door seal or weatherstrips on the Audi A6 (Mk3 C6). Each clip includes a deep foam sealing washer. The parts are hig...

These are a universal part very common on a wide range of models. The clip fits into a 5mm hole in the bodywork, while the longer canoe-shaped head...

These clips are used on the trims around the door and door opening on several models including some versions of the Megane.

These small grey plastic clips are used for the rubber door seal on some Volkswagen models.

These black plastic clips with pre fitted foam sealing washers are used on many different BMW and Mini models. They are used on some of the coupe a...

These black plastic clips with pre fitted foam sealing washers are used on many different BMW cars but rarely on Minis. They are used on the F57 Mi...

This clip is used on some of the older VW models such as the Mk2 Golf and Corrado. The clip is normally used on the door sill covers.

This small fir tree style clip is used on the sill mouldings of several Mini cars. The clip is used to attach the scuff plate in position.

These distinctive looking clips are used as spacers for interior trim panels such as sill covers or pillar covers.

These small white fasteners normally slide into the backs of plastic trim panels used on the door sill. The fastener then pushes into a hole in the...

These small black metal clips are used to secure trim strips to the door cards on several VW models.

These tiny black fasteners are used to secure the trim or seals that run by the door hinges of several BMW models.

This distinctive part is used on the Honda Accord (1998-2001) and the Acura or Honda MDX (2000-2006). The part is used on the front doors to fasten...

These green plastic trim clips are used on many modern Honda cars since about 2010. The clips are used for attaching interior trim panels such as d...

These clips are used on several older BMW models including the E36, E34 and E38. The clips is used in different places on each model but are used t...

These clips push to fit and are easily released with a quarter turn of the head. For this reason they are often used for access panels around the e...

These clips fit into a 6.5mm hole and are used on some Smart models to hold parts such as bumpers and cover panels.

These small clips are easy to fit and easy to release. A quarter turn of the head is enough to release the centre pin and allow them to be removed....

These small clips are easy to fit and easy to release. A quarter turn of the head is enough to release the centre pin and allow them to be removed....

Fitting into a 6.5mm hole, these clips are pushed in to place and then easily released with a quarter turn of the head. They are widely used by Ren...

This clip is a simple to fit push rivet and releases easily with a quarter turn of the head. They are often used on panels which require access.

These small clips are ideal for motorcycle fairings or lightweight interior trims. The clips fit into a 7mm hole and when the centre pin is pushed ...

These edge nuts are used to attach parts such as engine undertrays, bumpers, splashguards and interior trim on Honda cars as well as fairings and c...

This distinctive fastener is used on many different Renault cars and vans. The clip is normally used around the engine bay or the inner wing to ret...

Thisis by far the most common sump plug washer used by Honda for it's range of cars and fits most of their car range from the 1980s onwards.

These are aftermarket replacements for the caps used to hide the bolts on the cylinder head cover of many different BMW models. They are often lost...

These black metal screws are used to attach the engine undertray to most modern Kia vehicles. The screws are heavy duty and unlikely to break but t...

This kit contains all the fasteners needed to attach the engine undertray panel on the vehicles listed below. We have researched and created these ...

Black metal screws used on many different Hyundai vehicles to secure the engine undertray in position.

These metal fasteners are used on the undertray and other underbody access shields to secure the panels in place. They lock and are released with a...

These metal fasteners are used on the undertray and other underbody access shields to secure the panels in place. They lock and are released with a...

These metal fasteners are used on the undertray and other underbody access shields to secure the panels in place. They lock and are released with a...

This is one of several styles and sizes of washer used by SEAT to attach underbody shields and trim panels.

Normally used on wheel arch linings or splashguards, this grommet is also used on some models for sideskirts, windscreen cowls, bumpers and some un...

These wide collared plastic nuts lock in position when turned. They are used on the underside of many different Mini models for engine undertrays a...

These parts are used with screws to mount panels and trims. They are common on under body trays, splash guards and engine bay shields. They are use...

These are a simple and distinctive push fit expanding plastic rivet. The parts are used on lots of different vehicles for items such as arch lining...

This expanding clip fits into an 8mm x 10mm rectangular hole. The wide collar makes them particular suitable for loose fitting panels such as uphol...