vvo

These brown plastic lock nuts have a rubber seal built onto the clip They are used by Skoda to attach parts and trim to the bodywork.

These bumper bracket clips are used on some modern Nissan and Renault models. An example use is Nissan Qashqai rear bumper clips. The clips are a h...

These are a distinctive rectangular collared clip used on several VW models. They are nearly always used on the rear bumpers, impact absorption and...

These black plastic fasteners are used to locate and position the rear bumper on several Renault cars. This includes some models of the Clio, Megan...

These white plastic trim clips are used on several older VW vehicles such as the classic Beetle, Mk1 Golf and Type 25. The clips are used to attach...

These clips are normally fitted on the bodywork to position and secure the bumper corners. Each clip includes a foam sealing washer. The parts are ...

This unique round headed clip is used on several models including some versions of MX-5, the Ford Maverick and the Mazda MPV. The clip fastens into...

This part is used to align and mount the bumper on several Kia models.

These white fasteners are used to secure the bumper alignment. They can often be snapped in a collision or become brittle as they age. They are an ...

These small black grommets are fitted into the wing and used with a screw to line up and fix the corner of the bumper. They are used on a number of...

These plastic pins are used to attach the rear tow eye covers on a number of Audi and Volkswagen models. The clip twists in to lock or unlock the a...

These plastic pins are used to attach the rear tow eye covers on a number of Audi and Volkswagen models. The clip twists in to lock or unlock the a...

Screw fit plastic fasteners that are fitted to several Land Rover vehicles including the Freelander and Range Rover Sport. They are typically used ...

These are a large screw fit plastic clip that is widely used on older Honda cars. They are used on bumpers, side skirts, sill mouldings, undertrays...

These two part push fit clips are made from metal and plastic. The clips are typically used on parts such as wheel arch linings or for other trim p...

These distinctive blue moulding clips are fitted to several newer Toyota vehicles including the Mk3 Yaris, C-HR and the Mk3 RAV4. They are common o...

This is the clip that is used on most modern Kia cars to attach the material insulation to the underside of the bonnet.

These push fit button clips are used by Volvo to secure upholstery and insulation in place.

These simple button clips are used to secure the bonnet sound insulation on the Citroen C1. This is the fabric fitted to the underside of the bonnet.

These simple button clips are used to secure the fabric insulation fitted to the underside of the bonnet on the Peugeot 107 and 108. They simply pu...

These simple push fit button clips are used to fasten rubber seals in position. The clips are normally used on the rubbers that run along the edges...

These small clips push into a 7mm hole and the fin lock the clip in place. They are typically used by Toyota for small, light trim panels such as a...

These black cable and wiring loom harnesses are used to securely hold cables and looms in place. The clips come with a sealing washer to give a goo...

These are used on many different models for bonnet release cables, fuel hatch release cables, looms and door locks. The clip takes a maximum diamet...

This nylon cable tie fit into a 6mm hole and can hold a maximum bundle diameter of 45mm.

Used across the Citroen range of cars and vans, these clips fit carpets, insulation and linings in place. They are used on many different models an...

Used across the Peugeot range of cars and vans, these clips fit carpets, insulation and linings in place. They are used on many different models an...

This type of clip attaches to a barbed stud or shaft that is normally attached to the bodywork. The clip slides onto in and secures items such as c...

These chunky white clips are common on modern Mini cars and used all over the chassis. They are found on side skirts, arch linings, splashguards an...

These are just used on a couple of Citroen models for wheel arch linings and the interior trim panels that line the load bay of some Citroen vans. ...

These distinctive T-shaped white plastic trim clips are used to secure the front bumper trim on the Citroen BX. The clips are a high quality afterm...

These clips are used on some Citroen models to attach exterior trims such as those that run along the side of the door or the lower protective plas...

These are an easy to recognise trim clip fitted in plenty of modern Citroen cars and vans. They are used to fix front and rear door card trim panel...

These white trims clips are normally used on the interior trims. Citroen use these as door card clips, tailgate lining clips and boot lining fasten...

These are a very common interior and exterior trim panel clip used by Citroen. Our aftermarket alternatives are a high quality replica produced to ...

These are one of the most common Citroen clips used right across their range. At our last count these were used on at least 24 different Citroen ca...

These distinctive plastic clips with a curved head and integrated rubber seal are fitted to the Fiat Ducato, Citroen Relay and Peugeot Boxer. The c...

These white clips are used on a few different Citroen cars. They are used for interior and exterior trims fitted to the tailgate and also for grill...

These black interior trim clips are fitted to most Audi models produced in the 1970s, 80s and 90s. They are typically used for door cards but also ...

These are used on a few different vans. They are there to hold the protective plastic mouldings onto the lower sides and rear doors. They are almos...

This is a widely used yellow / orange clip found on the rubber weatherstrip seals and also on the door membrane. They are used on a number of diffe...

These 10mm threaded brass nuts are used on many older Honda vehicles for attaching side mouldings, window pillar strips and various other trims. Th...

These are used by Ford to attach the interior D pillar trims in the boot area of the Focus C-Max and C-Max (2003-2010).

These small white trim clips are used on fascia surrounds, panel covers and trims on and around the dashboard, centre console and door cards. The c...