Toyota Car Trim Clips, Fixings and Fasteners

These distinctive white plastic trim clips are used to attach body mouldings to several different Toyota cars including the C-HR and the RAV4. The ...

This clip is normally used by Subaru but is also fitted to the Toyota GT86 around the rear bumper. The clip is a simple push fit plastic rivet that...

These heavy duty fasteners are typically used for larger trim panels such as bumpers, under body shields, side skirts and wheel arch linings. The c...

These clips are used to attach the large plastic mouldings fitted to the doors on the RAV4 (1995-2000). The clips are each fitted with a foam seali...

These small clips come with the foam sealing washer as shown in the picture. The clip is used on a wide range of models and for a number of differe...

These are blue interior or exterior trim panel clips are used to attach door cards, side panels and boot lining trims on a number of Toyota models.

These plastic rivets are used to secure front and rear bumpers, radiator surrounds and engine bay trims. They fit into a 10mm hole.

These distinctive clips are used to hold and secure the splash guard liner around the wheel arch.

This type of clip is normally used on shields such as wheel arch liners, bumper trims, side skirts and mudguards.

identical specifications and equal in quality to the OE Toyota parts, these clips are a fraction of the cost. The clips are used to attach fabric i...

These clips are pushed into square holes and click in place to hold wheel arch linings, sill trims and engine shields. The clips can also be used a...

These distinctive yellow trim clips are used to fit side body mouldings to the Toyota RAV4 (2000-2005). The clips are used on the rear wheel arch f...

This distinctive clip is one of many different coloured body moulding clips used by Toyota including on the Land Cruiser Prado and the Lexus GX470....

One of many clips used for attaching the side mouldings and trims on various models of the Toyota Land Cruiser. There are a lot of different clips ...

These small, 7mm black plastic trim clips are used by Toyota on a number of different cars. The clips are a standard push-fit plastic rivet style f...

This fir tree style clip has a distinctive head with a cut out portion. The clip is used on a number of different Lexus and Toyota vehicles on upho...

These are often found in boot linings, dashboard covers, and access panels around the interior or engine bay of the vehicle. They fit a 7mm hole an...

These screw grommets fit into a square 9x9mm hole. The part is used with a screw to fasten plastic bumpers, spoilers, headlamps and mudguards onto ...

This distinctive clip is one of many different coloured body moulding clips used by Toyota on models such as the Land Cruiser Prado and the Lexus G...

These are not common on Toyota cars but are found on some models, normally around the radiator or engine bay. The clips are used to secure trim pan...

These push fit plastic fasteners are used on a few different Toyota and Lexus models. They are typically used to attach side skirts, bumpers and wh...

These distinctive trim clips are used on bumpers, shields and undertrays. They fit into a 9mm hole and have a wide 33mm collar.

These small plastic clips are used on weatherstrip seals and rubber aperture seals. The clip head fits inside the rubber seal and then the stem of ...

These clips are used on several older Toyota cars including the MR2. They are typically used to attach door card trim panels but are sometimes also...

These orange snap fit fascia clips are used to secure trim and covers onto the dashboard and centre console on many modern Toyota cars and vans. Th...

This is common clip used by Toyota on many different models of car. The clip is used for a wide range of fittings including cowls, shields, fender ...

These small plastic trim clips are used on interior trim panels and fascias. They are fitted to lugs on the back of trim panels and then they snap ...

A 9mm clip used on a number of Toyota and Lexus vehicles including the MR2, Supra, Celica and LS400. The clip fits into a 9mm hole and is recognisa...

This clip is very popular across the Toyota range. It is most often used on interior trim panels such as door cards, boot linings and pillar covers...

These clips are used to attach various trim and protective panels in and around the engine bay and underside of the car. They are quite distinctive...

These are used on many different models for bonnet release cables, fuel hatch release cables, looms and door locks. The clip takes a maximum diamet...

This distinctive clip is one of many different coloured body moulding clips used by Toyota on models such as the Land Cruiser Prado and the Lexus G...

Commonly found on door cards, pillar trims and other interior trim panels, this plastic clip is widely used throughout the Toyota and Lexus range. ...

A simple push button clip used to retain the bonnet insulation and sound deadening fabric panels fitted to the underside of the bonnet.

This screw grommet is used on lots of different Toyota cars and all over the vehicles. Fitment uses include sill covers, side mouldings, grilles, b...

These expanding rivets push in to lock in place but can be easily released with a quarter turn of the screw head. This makes them ideal for access ...

These large and distinctive expanding plastic rivets are used to secure the side skirt or sill cover mouldings onto the Toyota Avensis Mk3, The cli...

This is one of many different clips used by Toyota to affix the side moulding trim onto models such as the Land Cruiser Prado. The clips are colour...

These yellow moulding trim clips are used by Toyota to secure exterior trims such as wheel arch flares and side bump strips. For example, this fast...

This wide collared 7mm screw fit clip is used on some Toyota models to secure panel in position. This can include seat backs and bases, boot lining...

Common on door card panels, pillar trims and headlinings. These clips are a good universal clip and were widely used by Toyota. The clips fit into ...

These parts are used on several modern Toyota vehicles often on exterior parts such as bumpers or exterior trims.

Small plastic fasteners used on some Toyota vehicles to secure exterior trim mouldings such as side skirts and sill covers. Each yellow fastener in...

A two-part interior and exterior trim clip. These clips are fitted pre-assembled but designed to break apart if the trim is removed or knocked. Our...

These black plastic clips are normally used to secure wheel arch liners or underbody shields. The parts fit onto studs mounted on the body.

These plastic and steel rivets are used on some Toyota and Lexus models to secure the plastic trim moulding that runs alongside the windscreen. The...

These are used on the Toyota Corolla, Supra and Celica for interior panels such as the boot ling as well for the radiator grille cover, bumpers and...