Screw Grommets & Locknuts

These are used on a number of different Toyota cars from the Auris to the Avensis and up the Lexus LFA. They can be used in many different location...

These clips are extremely common across the Toyota range. The clips are normally used around the edges of the wheel arch. They mount onto the wing ...

These small white plastic grommets come with integrated rubber seals. They are very common on the BMW and Mini range and are used in a wide range o...

These plastic screw grommet or locknuts are very widely used on modern Vauxhall cars. The clips are fitted into the metal bodywork of the car and a...

These clips are widely used across the Kia range. They are used to mount parts such as wheel arch splashguards, side skirts, sill covers, bumpers a...

These take an M4 screw and fit into an 8mm square hole. They are a good universal part used to fasten parts or trims to metal bodywork. This partic...

These are used on most modern Hyundai cars. The clips are used to attach wheel arch linings and occasionally bumpers and trim.The grommets fit into...

These bodywork screw grommets are found on old and new VW cars and commercial vehicles. Example uses include Mk2 Golf wheel arch lining clips, Mk3 ...

These grey screw edge grommets or spire clips are used to join parts without necessitating damage to the metal bodywork. This part slides over the ...

These screw grommet mounts have an integrated rubber seal. They are used for locating and mounting panels such as door card trims, side skirts and ...

These are very widely used across the VAG group. The grommet is used on a large number of parts including around bumpers, sills, side skirts, wheel...

These yellow fasteners are used on the Smart Roadster to secure the front wheel arch lining to the wing and some bumper trims in position.

These are a standard screw grommet used to fasten trims and parts into metal bodywork.

These clips are used around the edges of the wheel arch. They mount onto the lip of the wing and then the plastic wheel arch liner is attached when...

These green chimney nuts are normally used to secure plastic trims or parts onto the edge of body panels. The fastener type is widely used by Vauxh...

These standard screw grommets fit into a square hole measuring 8x8mm. The parts are normally used to attach trim and parts to metal panels without ...

These black plastic locknuts or screw grommets fit into 10mm square hole. The grommet fits into a hole in the metal bodywork and allows a screw to ...

These clips are used by Hyundai for mounting parts and trim to the metal bodywork on several of their models. An example use is for the wheel arch ...

These pink plastic fasteners are used on side mouldings, sill covers and wheel arch flares.

Standard lock nuts or screw grommets used for mounting parts or trim to metal bodywork. These clips push into a square 8.5mm hole in the bodywork. ...

These are a very common clips fitted to most Audi and VW cars in the last 30 years. They are a standard screw grommet and are used throughout the v...

Very widely used across the Vauxhall model range, these clips are almost always used on or around the front bumper and radiator grille. The nut fit...

These clips are very widely used on Fiat and Alfa Romeo cars and commercial vehicles. The clip is a simple grommet but is oblong which allows for s...

These small and distinctive plastic clips are used along the top of the bumpers on some Land Rover models. The clip acts as a captive nut for attac...

These screw grommets fit into a square 8mm hole. They are very common on modern Hyundai cars and used on almost all models to help fasten door pane...

Used on several VW cars and vans, these are also a good universal screw grommet for mounting and joining parts and panels.

These clips are normally used on or around the front bumpers and wheel arches. The clip is sometimes used with a screw through the middle to connec...

Very common across the entire Volkswagen Group of VW, Audi, SEAT, Skoda and Porsche. The clips are used with wheel arch liners, interior trims, qua...

These are good universal screw grommet that fits into a square hole measuring 11mm x 11mm. Fiat have used this part on several of their vehicles to...

Hyundai use this part across a wide range of their vehicles. The clip is used in different places on each model but is common for mounting front or...

These small black grommets are fitted into the wing and used with a screw to line up and fix the corner of the bumper. They are used on a number of...

Oval screw grommets or trim locators used widely on Peugeot cars and vans. Typically found with parts such as pillar covers, door cards, centre con...

These clips are used on the door panels to hold the interior trim. The clips twist to expand and lock in position where they are then used to mount...

This type of part is for mounting trims, panels or parts onto metal bodywork. The grommet fits into a hole in bodywork. The part is then aligned wi...

These small yellow clips are used on some Land Rover vehicles for mounting lights and trim to bodywork.

These clips are pushed into square holes and click in place to hold wheel arch linings, sill trims and engine shields. The clips can also be used a...

These white plastic chimney nuts, speed nuts or screw grommets are used on several Nissan cars including all models of the X-Trail. The clips are u...

These small white plastic grommets come with integrated rubber seals. They are very common on the BMW and Mini range and are used in a wide range o...

This is a standard plastic spire clip that will normally be used for securing parts to bodywork. They're commonly used to attach plastic bumper cov...

These oval grommets are used for mounting and positioning parts such as pillar covers, sill entrance covers and any other trim panels and upholster...

These brightly coloured pink clips are used on exterior trim such as side mouldings and wheel arch flares. The clips fit a hole in the bodywork and...

These screw grommets fit into a square 9x9mm hole. The part is used with a screw to fasten plastic bumpers, spoilers, headlamps and mudguards onto ...

These clips are used for mounting trim, bumpers, lighting and other parts into position. The grommet fits into a square hole in the bodywork. A scr...

These are widely used across the Citroen and Peugeot range. The clip is oval shaped and is used all over the vehicles. The shape of the clip allows...

These screw grommets are common on Fiat cars for attaching and securing the door cards.

Complex screw grommet that twists and locks in position. This part is used on many different modern Mini cars and is normally used on exterior pane...

An oval screw grommet widely used across the Peugeot range and across their vehicles. The grommet is used for mounting trims, panels and parts into...

This is a standard screw grommet used on several Honda models. The clips is nearly always used on the front or rear door panels. The grommet fits i...