Screw Grommets & Locknuts

This clip pushes into an 8mm square hole and is normally used to hold flexible panels such as wheel arch linings and splash guards. The centre hole...

These red plastic clips are used on many Ford models to attach underbody shields, wheel arch linings, bumpers and engine undertrays. They are one o...

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Toyota models. They are used on several models normall...

These small white plastic grommets come with integrated rubber seals. They are very commonly used in the VW Group. They are used in a wide range of...

These small plastic grommets or lock nuts are used on a range of different vehicles within the VAG group. They are used in a number of different pl...

A red screw grommet used on many different Vauxhall models. Typically, these are used to fit bumpers and wheel arch linings.

These screw mounting grommets fit into a square hole in the bodywork. Each clip includes an integrated rubber seal. They are typically used by Ford...

These small, white screw grommets are used around the vehicle for fastening trim panels and parts to the bodywork. The grommet fits into the bodywo...

These are very widely used on modern BMW vehicles. The clips are used to join panels, mount trims, shields, bumpers, arch linings and undertrays. T...

A common and distinctive red plastic expanding nut used on the Land Rover Defender and many of the more modern Land Rover vehicles. The clip can be...

These are positioning grommets that fit into the metal bodywork of the car. The tail lights have lugs on them that then fit into these grommets.

This part is used on modern Ford cars and vans. The grommet is typically used for mounting front or rear lamps and bumpers.

Complex screw grommet that twists and locks in position. This part is used on most modern BMW cars and is normally used on exterior panels. Typical...

These are one of several types and sizes of screw grommet fitted to most modern Audi cars. They are used for mounting anything from number plates t...

Found on many different Ford models this expanding nut is normally used to attach front or rear bumpers and wheel arches to the wing.

These are very widely used across the VAG group. The grommet is used on a large number of parts including around bumpers, sills, side skirts, wheel...

Sometimes known as chimney nuts or spire clips, these grey plastic clips are used to join trims and panels. These are used on many different Mazda ...

This oval shaped screw grommet is designed to mount parts and trim panels in place on the bodywork. The part is used on several Renault models incl...

This snapsac insert is used in conjunction with a number of other parts on Land Rover and Range Rover vehicles. The snapsac is pushed into the meta...

These screw grommets or chimney nuts are unthreaded and used by Volvo to secure trim panels, bumpers and shields. The clip is common on many differ...

These small white plastic screw grommets are widely used on modern Ford cars and vans. The clip is commonly used around the wheel arches for the mu...

These are distinctive screw grommets used by BMW on most of their recent vehicles to secure door cards and trim panels. The clip is unusual in that...

These plastic lock nuts, lokuts or screw grommets fit into a square 9mm x 9mm hole. Each one includes a foam sealing washer. They are identical to ...

Plastic clip that is used to retain shields and linings normally around the wheel arches. The clips can also be used as screw grommets and so are o...

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Peugeot models. They are used on several models normal...

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Toyota models. They are used on several models normall...

These are very common on Mitsubishi cars and pick up trucks. The plastic spire-type clips are normally around the edges of the wheel arch lining wh...

These are standard screw grommets used for mounting trims and parts into position on the bodywork. These fit into a 10mm x 10mm square hole in the ...

Very common across the entire Volkswagen Group of VW, Audi, SEAT, Skoda and Porsche. The clips are used with wheel arch liners, interior trims, qua...

These plastic expanding nuts are used on lots of different BMW cars. They can be found throughout the body and interior and used to attach panels, ...

A common screw grommet fitted to many Audi vehicles. The clip is used throughout and example uses are wheel arch linings, pillar trims, door cards,...

These plastic screw grommets are used around the wheel arch lining and for wheel arch trims on a number of Nissan and Infiniti cars. They are used ...

Very widely used screw grommet that fits into a square hole measuring 8.5mm by 8.5mm. The clip is used by Mitsubishi to secure trim or parts to bod...

These are used to mount the bumpers on several Mitsubishi models. This part fits into a hole in the metal bodywork and the plastic bumper cover is ...

These clips are widely used on modern BMW cars. The clip is a receiver for other parts and is normally used for underbody shields and trims such as...

This plastic lock nut or expandable nut is extensively used by BMW. The part is used on most models since the 1990s and in a wide range of location...

Small screw grommets used for mounting trim panels and parts onto metal bodywork. These little clips fit into a 7mm square hole and are used by VW ...

Normally used on wheel arch linings or splashguards, this grommet is also used on some models for sideskirts, windscreen cowls, bumpers and some un...

These distinctive yellow plastic clips are used to secure the undertray and underbody shields to the Smart Fortwo models from 1998-2014 (model code...

These red lock nuts are used to secure underbody shields and trim panels to some Volvo models.

These screw grommets are used on several BMW models for many different parts. Examples include bumpers, splashguards, underbody shields and interio...

These are a standard screw grommet used to attach parts or trims onto metal bodywork without having to screw directly into the metal.

These chunky white clips are common on modern Mini cars and used all over the chassis. They are found on side skirts, arch linings, splashguards an...

Each of these screw grommets includes a sealing washer. The clips are typically used to attach exterior trim panels in position. An example of this...

These small plastic grommets or lock nuts are used on a range of different vehicles within the VAG group. They are used in a number of different pl...

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Citroen models. They are used on several models normal...

These small white plastic grommets come with integrated rubber seals. They are very commonly used on Audi cars. They are used in a wide range of pl...

These small white locator grommets fit into hole in the bodywork. A trim panel is then attached either using a locator on the trim, or a self-tappi...