Screw Grommets & Locknuts

These small white plastic grommets come with integrated rubber seals. They are very commonly used in the VW Group. They are used in a wide range of...

These small, white screw grommets are used around the vehicle for fastening trim panels and parts to the bodywork. The grommet fits into the bodywo...

These screw mounting grommets fit into a square hole in the bodywork. Each clip includes an integrated rubber seal. They are typically used by Ford...

These are very widely used on modern BMW vehicles. The clips are used to join panels, mount trims, shields, bumpers, arch linings and undertrays. T...

Complex screw grommet that twists and locks in position. This part is used on most modern BMW cars and is normally used on exterior panels. Typical...

Found on many different Ford models this expanding nut is normally used to attach front or rear bumpers and wheel arches to the wing.

This snapsac insert is used in conjunction with a number of other parts on Land Rover and Range Rover vehicles. The snapsac is pushed into the meta...

These small white plastic screw grommets are widely used on modern Ford cars and vans. The clip is commonly used around the wheel arches for the mu...

These plastic lock nuts, lokuts or screw grommets fit into a square 9mm x 9mm hole. Each one includes a foam sealing washer. They are identical to ...

These are standard screw grommets used for mounting trims and parts into position on the bodywork. These fit into a 10mm x 10mm square hole in the ...

Very common across the entire Volkswagen Group of VW, Audi, SEAT, Skoda and Porsche. The clips are used with wheel arch liners, interior trims, qua...

These plastic expanding nuts are used on lots of different BMW cars. They can be found throughout the body and interior and used to attach panels, ...

Very widely used screw grommet that fits into a square hole measuring 8.5mm by 8.5mm. The clip is used by Mitsubishi to secure trim or parts to bod...

This plastic lock nut or expandable nut is extensively used by BMW. The part is used on most models since the 1990s and in a wide range of location...

Small screw grommets used for mounting trim panels and parts onto metal bodywork. These little clips fit into a 7mm square hole and are used by VW ...

These are used to mount the bumpers on several Mitsubishi models. This part fits into a hole in the metal bodywork and the plastic bumper cover is ...

These screw grommets are used on several BMW models for many different parts. Examples include bumpers, splashguards, underbody shields and interio...

These small white plastic grommets come with integrated rubber seals. They are very commonly used on Audi cars. They are used in a wide range of pl...

These are a standard screw grommet used to attach parts or trims onto metal bodywork without having to screw directly into the metal.

These chunky white clips are common on modern Mini cars and used all over the chassis. They are found on side skirts, arch linings, splashguards an...

These small white plastic grommets come with integrated rubber seals. They are very common on the BMW and Mini range and are used in a wide range o...

Each of these screw grommets includes a sealing washer. The clips are typically used to attach exterior trim panels in position. An example of this...

These plastic screw grommet or locknuts are very widely used on modern Vauxhall cars. The clips are fitted into the metal bodywork of the car and a...

These small white locator grommets fit into hole in the bodywork. A trim panel is then attached either using a locator on the trim, or a self-tappi...

These take an M4 screw and fit into an 8mm square hole. They are a good universal part used to fasten parts or trims to metal bodywork. This partic...

These are a standard screw grommet used to fasten trims and parts into metal bodywork.

These standard screw grommets fit into a square hole measuring 8x8mm. The parts are normally used to attach trim and parts to metal panels without ...

Standard lock nuts or screw grommets used for mounting parts or trim to metal bodywork. These clips push into a square 8.5mm hole in the bodywork. ...

These small and distinctive plastic clips are used along the top of the bumpers on some Land Rover models. The clip acts as a captive nut for attac...

These clips are normally used on or around the front bumpers and wheel arches. The clip is sometimes used with a screw through the middle to connec...

Very common across the entire Volkswagen Group of VW, Audi, SEAT, Skoda and Porsche. The clips are used with wheel arch liners, interior trims, qua...

Hyundai use this part across a wide range of their vehicles. The clip is used in different places on each model but is common for mounting front or...

Oval screw grommets or trim locators used widely on Peugeot cars and vans. Typically found with parts such as pillar covers, door cards, centre con...

These clips are very widely used on Fiat and Alfa Romeo cars and commercial vehicles. The clip is a simple grommet but is oblong which allows for s...

These white plastic chimney nuts, speed nuts or screw grommets are used on several Nissan cars including all models of the X-Trail. The clips are u...

These oval grommets are used for mounting and positioning parts such as pillar covers, sill entrance covers and any other trim panels and upholster...

These clips are used for mounting trim, bumpers, lighting and other parts into position. The grommet fits into a square hole in the bodywork. A scr...

These screw grommets are common on Fiat cars for attaching and securing the door cards.

These small white plastic grommets come with integrated rubber seals. They are very common on the BMW and Mini range and are used in a wide range o...

This is a standard screw grommet used on several Honda models. The clips is nearly always used on the front or rear door panels. The grommet fits i...

These screw grommets are widely used by BMW and fitted to many different models. Typical uses includes front or rear bumpers and tailgate trims. Th...

This plastic mounting clip with sealing washer is normally used to join bumper covers to the front or rear wings. These clips sit in the metal body...

Complex screw grommet that twists and locks in position. This part is used on many different modern Mini cars and is normally used on exterior pane...

A standard plastic screw grommet used for mounting body panels, trim panels and parts to bodywork. This is a high quality alternative to the genuin...

Very common across the entire Volkswagen Group of VW, Audi, SEAT, Skoda and Porsche. The clips are used with wheel arch liners, interior trims, qua...

These plastic nuts are mounted in the metal bodywork and used to secure trim panels and covers. They are used on lots of different Mini models.

These small white screw grommets fit into a square hole measuring 7.1mm x 7.1mm. The clips are used by Fiat on many of their cars and vans. Typica...

These are a standard screw grommet used to attach parts or trims onto metal bodywork without having to screw directly into the metal.