Screw Fit Fasteners

These clips are used on lots of different Land Rover vehicles from the MK2 Discovery up to the current Range Rovers. They are typically used as whe...

These are very widely used across the Ford range since the 1990s. The clip is common on a lot of Ford models and is a utility clip used to fix anyt...

These clips are used on a wide range of VW cars and vans. The clips are distinctive because of the allen key head which gives the clips an industri...

These are one of the most widely used Hyundai plastic trim clips. This part is fitted to many different models and is a very common 8mm clip used o...

Used on several Mini car models, these plastic screw to fit clips are used on large trim panels such as bumpers, sill covers and underbody shields....

This is an equivalent to the Jaguar part C2S9354020. The screw rivet fits into a 6.5mm hole. When the centre pin is pushed in, the clip expands to ...

These are a distinctive rectangular collared clip used on several VW models. They are nearly always used on the rear bumpers, impact absorption and...

Common and widely used screw fit plastic fastener. Ford use these for shields, splashguards and other trim panels.

Fitted to several Mitsubishi models, these clips are used for multiple purposes. They are found on wheel arch linings, bumpers, splashguards and in...

This clip is very widely used across the Mazda range. It is used on everything from interior trim panels to bumpers, engine bay shields and wheel a...

These are very common clips used on many different Kia cars. The clips are used to attach parts such as undertrays, windscreen cowls, side skirts, ...

Normally found on Mazda front or rear bumpers, these plastic fasteners expand when the centre pin is pushed in. They fit into a 5mm hole. The clips...

Screw fit plastic fasteners that are fitted to several Land Rover vehicles including the Freelander and Range Rover Sport. They are typically used ...

Normally used to secure wheel arch linings, splashguards, undertrays or bumpers, these simple screw fit plastic rivets are used on several differen...

This wide collared trim is used on loose fitting trims and insulation panels. It is common on interior carpet linings, bonnet insulations and other...

These large screw fit plastic fastenings fit into a 12mm hole. They are used on some vehicles to attach underbody shields and other large plastic t...

This small screw fit plastic rivet fits into a 5mm hole and is used on many different Toyota cars. The clip is normally used for small trim panels ...

This clip is used on a lot of different BMW and Mini cars produced from 2000 onwards. The clip is used for many different purposes including interi...

This is common clip used by Subaru on a large number of their cars. The clip is found on cowls, shields, fender and fairing covers, wheel arch lini...

Expanding screw fit rivets such as these will normally be used wheel arch linings, bumpers, under trays and sill mouldings.

These chunky screw fit plastic trim clips are used on some Jaguar models to attach air deflectors and shields around the engine bay and radiator. T...

These clips are used on the front bumper and front wing of some Smart Fortwo cars.

These were used by BMW on several older models. They are a strong clip and so were typically used for larger trim panels such as bumpers, sill moul...

These plastic clips are used on the Jeep Renegade to secure rear wheel arch linings and around the front bumper. The clip fits into an 8.5 or 9mm h...

These are a large screw fit plastic clip that is widely used on older Honda cars. They are used on bumpers, side skirts, sill mouldings, undertrays...

These screw fit plastic fasteners are used on some Fiat models normally to secure bumpers and wheel arch linings. The clips fit into an 8.5 or 9mm ...

These screw fit black plastic rivets are used on some Jaguar models. Typical fitments include for bumpers, arch linings or interior trim panels.

Small 6mm screw fit plastic fasteners also known as scrivets. These clips are used to fasten interior and exterior trim panels such as arch linings...

This simple screw fit rivet fits into a 5mm hole and is used to fasten bumpers and other trim panels in place on some models of Peugeot cars.

These rectangular collared retaining clips are normally used for the foam bumper impact absorption panels fitted behind the bumper covers.

These distinctive clips are used on modern Audi vehicles for sill mouldings and side skirts. The clip is an expanding plastic rivet with an allen k...

These heavy duty fasteners are typically used for larger trim panels such as bumpers, under body shields, side skirts and wheel arch linings. The c...

These 6mm scrivets or screw fit plastic rivets have a Torx head and are used by VW on a number of different vehicles. The plastic clip is fitted to...

Plastic screw fit rivets that expand when the centre pin is pushed or screwed in. This clip has a mottled patterned head and is used on several old...

Small, black trim clips that fit into 6mm hole. These parts have a wider collar than average. They are simple to fit or remove and are fitted to se...

A wide collar clip used on some Mercedes-Benz side skirts and plastic sill moulding covers. The screw has a Torx head.

These expanding rivets are normally used to attach loose fitting panels such as wheel arch linings or splash guards. They fit into an 8mm hole and ...

These clips fit into a square hole and have a large covering head. The clip is used by VW for securing large plastic trim panels such as windscreen...

The screw fit trim clips have an unusual hex head on the pin. They are fitted to some BMW models to retain the sill mouldings or side skirts. Other...

These are used on the Vauxhall/ Opel Brava, Monterey and the Isuzu TF / Faster. The clip is used in a number of places. This type of screw fit plas...

This type of clip is normally used on shields such as wheel arch liners, bumper trims, side skirts and mudguards.

Small 6mm screw fit plastic fasteners also known as scrivets. These clips are used on some Toyota cars and vans. The clips are used for interior or...

These are strong, screw fit plastic clips used to fasten bumpers and other large trim panels in place on some Honda cars.

This is common clip used by Toyota on many different models of car. The clip is used for a wide range of fittings including cowls, shields, fender ...

Small 6mm screw fit plastic fasteners also known as scrivets. These clips are used to fasten interior and exterior trim panels such as pillar trims...

These are generic plastic screw rivets (also known as scrivets) suitable for a 6.5mm hole. When the centre pin is pushed or screwed in, the clip ex...

Typically used by Citroen on front and rear bumpers, this part is more often seen on Toyota cars. The clips is fitted to the C1 which was produced ...

Used on various engine bay shields by Ford and may also be used for interior trim panels.