Push Fit Plastic Fasteners

These expanding rivets push in to lock in place but can be easily released with a quarter turn of the screw head. This makes them ideal for access ...

These small clips are used on a range of Honda vehicles. They are used on some cars for splashguards but more commonly on Honda bikes and ATVs for ...

This is a simple expanding plastic rivet. The clips fits into a 5.5mm hole and when the pin is inserted, the clip expands and locks in position.

These distinctive clips are used on interior and exterior panels such as tailgate and boot linings, wheel arch splashguards and engine bay shields.

These 7mm clips are normally used on the wheel arch linings or splashguards.

These distinctive plastic rivets are used on a wide variety of VW, Audi and SEAT cars. The clip is used for many different purposes from engine bay...

A standard push fit expanding plastic rivet which can be used for interior trim panels, dashboards, boot linings etc. This 7mm clip is used by Niss...

These black plastic rivets are used on some modern Mini cars to attach trim panels. The clip fits into an 8mm hole and expands when inserted.

These are very common on a number of Citroen cars being used as wheel arch lining clips, underbody fasteners and bumper panel retainers. They are a...

These are small push pin plastic rivets used on some Volvo cars and trucks. They are used for lightweight trim panels and covers.

SEAT use these parts for interior trim such as seat base trim and access panels on the dashboard, centre console and footwell.

These are a good universal 8mm push pin rivet also used by Mercedes to attach wheel arch linings and undertrays to several models of car and commer...

This is a standard 8mm push fit plastic rivet very widely used by Subaru across it's entire range and for a number of different purposes. The clip ...

This is a standard 8mm push fit plastic rivet very widely used by Mitsubishi across it's entire range and for a number of different purposes. The c...

These simple push fit plastic rivets are normally used by SEAT on front grilles, radiator covers and bumpers. The clips fit into a 6mm hole and exp...

A simple push fit pin rivet used on item such as bumpers, engine bay shields, undertrays and side skirts.

A simple 5mm plastic rivet that expands when the centre pin is inserted. This clip is used on some modern Vauxhall cars to secure interior trim pan...

These large and distinctive expanding plastic rivets are used to secure the side skirt or sill cover mouldings onto the Toyota Avensis Mk3, The cli...

These are simple expanding rivets. Normal uses include bumpers, side skirts, wheel arch linings. A specific example is that Peugeot use these as Pe...

These small plastic push fit rivets fit into a 6mm square hole and have a rectangular collar. Typical uses includes small interior trim panels and ...

These simple to use clips expand when the centre pin is pushed in. The fasteners are suitable for a wide range of purposes and fit into an 8mm hole...

A standard expanding plastic rivet. The clip expands and locks in position once the centre pin is pushed in. Example uses are as Citroen C1 front b...

This 8mm clip is very quick and easy to install and remove. They are often used for panels where access may be required such as around rear lights ...

These small push fit plastic rivets are used to secure parts such as arch linings and windscreen cowls. The clip is push to fit but can be easily r...

These trim clips are used on some models of the Smart Fortwo and Forfour to attach the wheel arch linings and the bumper trims.

A simple 8mm expanding plastic rivet. Smart uses this clip on some models to fasten underbody trim, wheel arch linings and side skirts.

This is a universal use black plastic rivet suitable for a 5.5mm or 6mm hole. The clip can be used for a wide range of purposes such as attaching i...

A large plastic rivet that fits into a 22mm diameter hole. The push fit fastener is used on models including the Toyota Prius and the Lexus CT200H ...

These small clips are easy to fit and easy to release. A quarter turn of the head is enough to release the centre pin and allow them to be removed....

These are not widely used by Citroen but they are fitted to some models. They are typically used as wheel arch lining clips or bumper fasteners.

Use on several Mitsubishi cars and vans, these are very simple push pin plastic rivets that fit into an 8mm hole. They are normally found on uphols...

These black 5.5mm expanding plastic rivets are used by Vauxhall for bumpers, bonnet insulation, shields and trim panels. These clips are an afterma...

Common on front and rear bumpers and underbody shields

These simple 8mm plastic rivets expand when push in. The clip is used for securing items such as wheel arch linings, undertrays, bumpers and grilles.

These push fit clips are used on the Fiat Fullback for the wheel arch linings.

This is an expanding push fit clip used on several Mini cars for attaching sound deadening panels, upholstery and carpet to various models within t...

A simple push pin plastic trim rivet that is used on some older Peugeot models. Typical usage includes as wheel arch lining clips and bumper fasten...

These distinctive plastic rivets are used on a wide variety of VW, Audi and SEAT cars. The clip is used for many different purposes from engine bay...

Fitted to the Peugeot 107 and 108, these clips are normally used by Toyota. These cars were designed and manufactured with Toyota and so some parts...

These are a standard 8mm push fit plastic trim clip used on several Nissan models. The Nissan equivalent part number is 63848-01G00 or 01553-08541

These clips are simple barbed fasteners that are used on a range of vehicles to secure trim such as splash guards, wheel arch linings, boot linings...

High quality push fit expanding plastic rivet clips used on some of the new Citroen models that are produced in conjunction with Mitsubishi. These ...

This plastic push fit clip is a standard black rivet style fastener. They fit into an 8mm hole and are a good universal fastener that can be used f...

These push fit plastic rivets with foam washers, are used on some Honda vehicles to attach the windscreen cowl. This is the piece of plastic trim t...

These push fit expanding rivets are used on a number of Honda vehicles to secure the scuttle panel below the windscreen. The clips fit into an 8mm ...