Push Fit Plastic Fasteners

These clips fit into a 7mm hole. They simply push into the hole and expand to lock in position when the centre pin is inserted. This clip is used b...

Simple 6mm plastic push fit rivet used by many different motorcycle and ATV manufacturers to attach fairing covers, trim panels and shields to vehi...

This clip is widely used by Toyota. It has been for the last 30 years and continues to appear on new models. It can be found in a variety of locati...

These are fitted to a few different Subaru models and used to fasten bumpers, radiator grilles, side skirts and underbody shields. The clip is a si...

These plastic fasteners are used on several Volkswagen cars and vans. The fastener is a standard 8mm push fit plastic rivet. These are normally use...

These 8mm clips are common as wheel arch lining, engine bay and bumper clips. Our parts are all produced to the exact same specifications as the or...

These clips are used on some of the Peugeot and Citroen cars that are produced with Toyota. They are used as front and rear Peugeot 107 bumper clip...

Fitted to the Model 3, these clips are used to attach some of the underbody shields to the vehicle. The clip pushes into an 8mm hole and expands to...

These clips have a 7.7mm diameter shaft and are used in the wheel arch lining on some Toyota models including the GT86. The clip is an expanding pu...

These are a 7mm standard push fit rivet that expands and locks when the centre pin is pushed in. They are used on several different Toyota models i...

These are one of our bestselling clips that's used on Peugeot cars and vans. At our last count these were used on at least 20 different Peugeot veh...

This plastic fastener fits into an 8mm diameter hole and expands to securely lock in place when the centre pin is inserted. They are used by VW on ...

Very common across the Mazda range, this clip is used to fasten and secure a wide variety of parts. Uses include Mazda MX-5 sideskirt clips, CX-3 b...

These simple expanding push fit rivets are fitted to several different modern Fiat cars. This includes the latest versions of the 500, Panda and Ti...

This two-part clip is used on several different Mercedes cars to attach interior trim panels. The fastener comprises a rubber insert grommet that f...

These are used on many Toyota models to secure small or lightweight trim panels such as windscreen cowls, pillar trim covers, boot lining panels an...

These 8mm plastic push fit rivets are used by BMW on engine bay shields, radiator surrounds and some interior trim panels. The clip is a standard p...

These 7mm push rivets are used on Suzuki motorbikes, ATVs and cars. The expanding rivets fit into a 7mm hole. The centre pin pushes in to expand th...

This clip is very widely used across the BMW range. It is used for a lot of different purposes. Some of the parts this clip is used with include si...

These clips are originally a Renault part. They are often fitted by Nissan on some of the vehicles developed jointly with Renault. They are a stron...

Most often used by Toyota on wheel arch linings and shields, these clips are just a simple plastic rivet that can be used on all sorts of trims ins...

Used on many different VW cars, these 8mm push pin rivets are normally used for attaching inner wing shields, undertrays or bumper shields.

These small 5mm plastic rivets expand when the centre pin is pushed in. They are widely used by Mercedes-Benz- normally on bumpers and wheel arch l...

These are a distinctive push fit black plastic rivet used on several Alfa Romeo vehicles. Example uses include as Giulietta windscreen cowl and arc...

These are short length push fit plastic rivets used on several Honda cars. The clips are normally used for securing thin panels such as arch lining...

These simple, push fit plastic rivets require no tools to fit. They simply expand to lock in position when the centre pin is inserted. These clips ...

These push fit plastic rivets are used by Volvo on some models to secure wheel arch linings, door cards and other interior or exterior trims.

These small push fit plastic trim clips fit into a 6mm hole. They are used on a wide range of different Vauxhall and Opel models including the Astr...

These are more commonly found on Toyota cars but are also used by Citroen on vehicles that they have produced in collaboration with the Japanese ca...

These plastic rivets are a replacement for Toyota part number 90467-09227. The clip has a grey centre pin and they are normally used on the undersi...

These small expanding plastic fasteners are used to accurately secure lightweight trim panels or corner pieces. They are used on parts such as bump...

These 8mm plastic trim clips are typically used to attach wheel arch lining, bumpers, grilles and underbody shields. The clip is a plastic rivet th...

These push fit plastic fasteners are used on many different Volkswagen cars and vans and for a wide range of purposes. They are used on the VW Tran...

This clip is common across a lot of different manufacturers. An example fitment is that it used by Ford to attach the rear wheel arch linings on th...

These push fit expanding plastic rivets are used on many different Mercedes models. The clip fits into a square or rectangular hole and the centre ...

Fitting into a 6.5mm hole, these clips are pushed in to place and then easily released with a quarter turn of the head. They are widely used by Ren...

These 7mm clips are used on modern Subaru models including some models of the Subaru Legacy, Outback and Impreza. The engine bay clips are used to ...

A standard and simple 7mm push fit black plastic rivet. These simple clips expand when the centre is pushed in and the clips lock in position. This...

Used on several Saab models, these simple push pin rivets are used to fasten bumpers, side skirts, wheel arch linings and other trim panels.

These clips are a high quality replacement identical to the OE parts. Mazda use these plastic push fit rivets for a variety of uses. They can be fo...

These 7mm plastic trim clips are used by Subaru on a number of different models including the Forester, Impreza, Legacy and BRZ. The clips fit into...

This is a standard 8mm push fit plastic rivet very widely used by Suzuki across it's car & bike range and for a number of different purposes. T...

These fasteners are typically used around the engine bay on radiator and engine covers or shields.

These clips are used by Honda on a wide range of car and bike models and a wide number of parts. They are found on engine bay shields, radiator cow...

These are one of the most common Citroen clips used right across their range. At our last count these were used on at least 24 different Citroen ca...

These simple push-fit plastic expanding rivets are used on the Subaru BRZ for many interior and exterior panels and trims. Uses include the tailgat...

Widely used by Smart, these clips fit into a 6.5mm diameter hole. The clip is used on parts such as bumpers, side skirt and arch linings and on mod...

Used on most BMW cars since 2010, these 8mm clips are normally used to secure boot linings and interior trim. The clip is a push fit rivet that exp...