Push Fit Plastic Fasteners

This clip is a simple to fit push rivet and releases easily with a quarter turn of the head. They are often used on panels which require access.

This part is used on several Mini cars. The clip is a simple expanding plastic rivet normally used for securing body parts such as bumpers, arch li...

Small push fit clips used by Subaru on a wide range of models. The clips are normally found on the bumper and grille but are also known to be used ...

These chunky push fit plastic rivets are a heavy duty fastener used by Subaru. The clips are common on some of the more modern Impreza, Forester an...

A standard push fit expanding plastic rivet which can be used for interior trim panels, dashboards, boot linings etc. The clip is used on many diff...

These clips are used on some of the Peugeot and Citroen cars that are produced with Toyota. They are used as front and rear Citroen C1 bumper clips...

Widely used by Smart, these clips fit into a 6.5mm diameter hole. The clip is used on parts such as bumpers, side skirt and arch linings and on mod...

This small push pin plastic rivet is normally used on VW cars to attach interior trim panels and linings. The clip is used on centre consoles, dash...

These clever clips push to fit and can be released with a quarter turn of the screw head. They are perfect for panels where access may be occasiona...

These standard push fit expanding rivets are fitted to several BMW models, typically on interior trim panels. The parts are used on items such as b...

These small plastic rivets fit into a 4.5mm diameter hole. The clip expands when the centre pin is inserted to securely lock in position. They are ...

These are simple plastic fasteners fitted by Land Rover to keep the splashguards in place on the front wheel arches of the MK2 Land Rover Discovery.

These are a simple push fit plastic rivet that expands and locks securely in position when the centre pin is inserted. The clip fits into an 8mm ho...

These are simple push fit fasteners that expand when the centre pin is inserted. They are used by several manufacturers including Mercedes. Mercede...

This clip fits into an 8mm hole. They are used on several Ford models for securing interior or exterior trim panels.

A standard 8mm push fit plastic rivet that is used on several models made by Mitsubishi. These plastic fasteners are used on arch linings, mudguard...

These make an excellent universal plastic rivet for an 8mm hole. The pin has a long barbed shaft which expands when activated and so these are suit...

These push fit plastic rivets fit into an 8.5mm hole and are used on some General Motors models including on Buick, Cadillac, Chevrolet, Vauxhall a...

These clips have a 7.7mm diameter shaft and are used in the wheel arch lining on some of the more recent Subaru models including the Impreza, Legac...

These clips are quick to install push fit clips but they can be released easily with a half turn of the screw head. The clip pin then unloads and t...

Used on most BMW cars since 2010, these 8mm clips are normally used to secure boot linings and interior trim. The clip is a push fit rivet that exp...

Used on several Vauxhall models, these clips are fitted by pushing in the head to expand the insert and lock into place. They are used on dashboard...

This is a very common part used on a wide range of vehicles all related to the Volkswagen Group. The clip is used for a variety of purposes from at...

This small expanding plastic rivet fits into a 5mm hole. It is used on some Subaru models for securing bumper trims and windscreen cowls.

This plastic fastener fits into an 8mm diameter hole and expands to securely lock in place when the centre pin is inserted. They are used by Audi o...

This clip is normally used by Subaru but is also fitted to the Toyota GT86 around the rear bumper. The clip is a simple push fit plastic rivet that...

A good generic 10mm push fit plastic clip. The centre pin is pushed in to expand the clip and lock in place. These are suitable for a wide range of...

These simple push fit plastic rivets expand to lock in position when the centre pin is inserted. They are used by Volvo on several models. A common...

Used on several Ford cars and commercial vehicles, these clips are normally used as wheel arch lining clips, interior trim panel clips or upholster...

These small clips are easy to fit and easy to release. A quarter turn of the head is enough to release the centre pin and allow them to be removed....

These are often found in boot linings, dashboard covers, and access panels around the interior or engine bay of the vehicle. They fit a 7mm hole an...

Commonly used by Peugeot and Citroen for wheel arch linings, splashguards and bumpers, this clip is also found on windscreen cowls, engine undertra...

These simple push pin rivets expand when the centre pin is inserted. This clip is used by Fiat to secure some trim mouldings and liners.

These push fit plastic rivets are used to attach the windscreen cowl trim on some Honda vehicles. The clip is a normal push fit rivet which clicks ...

A standard 8mm push fit plastic rivet typically used to attach wheel arch linings, engine bay shields or interior trims. These are a high quality e...

Commonly used by Vauxhall for bumper trims and covers, these long reach plastic rivets fit into a 6.5mm hole. The collar on the clip is 15.5mm.

A simple expanding plastic rivet. The rivet fits into a 6mm hole and expands to securely hold in position when the centre pin is inserted. Skoda us...

This is an expanding push fit clip used by BMW for attaching sound deadening panels, upholstery and carpet to various models within their range. Th...

These are simple push fit plastic rivets that fit into an 8mm hole and expand when the centre pin is inserted. The clips are used on several differ...

These 7mm plastic rivets are used on some modern Toyota models. In particular they are the Toyota RAV4 front grill clips (Mk4 2013-2018). The clips...

These 8mm clips are used on the CR-V (02-06), the Prelude (96-01) and some models of the Odyssey and the Shuttle. They are normally used for the pl...

A simple 8mm plastic rivet used to attach wheel arch linings, engine bay covers and shields, side skirts, bumpers and sill trims.

An 8mm plastic fastener used by Kia to secure parts such as the front grille and bumper.

These push fit plastic fasteners are used on many different Volkswagen cars and vans and for a wide range of purposes. They are used on the VW Tran...

These clips are a high quality replacement identical to the OE parts. Subaru use these plastic push fit rivets for holding inner wing liners in pla...

These are more commonly found on Toyota cars but are also used by Peugeot on vehicles that they have produced in collaboration with the Japanese ca...

A simple push fit expanding plastic fastener which is only unusual due to the large head on the push pin. These types of clip are normally used on ...

These wide collared parts are used by Honda to secure the underbody trim covers, shields and insulation onto many of their modern vehicles. The cli...