Skip to content

Land Rover Snapsac Plastic Insert Clip- Door Card & Trim Clip Stud Plugs MWC3136

SKU: FCP-0293-LA1

• Common across the Land Rover range

• Used with a variety of other clips

Original price €0
Original price €5,95 - Original price €15,95
Original price
Current price €5,95
€5,95 - €15,95
Current price €5,95
Title: Pack of 10
This snapsac insert is used in conjunction with a number of other parts on Land Rover and Range Rover vehicles. The snapsac is pushed into the metal bodywork and then a second clip with a ribbed or barbed stud can be mounted in the insert. They are use all over the bodywork but commonly on interior parts such as door cards, pillar trim and interior fascias.

Land Rover Part Number: MWC9136, MWC3136, EYC101460

Hole Size: 7.5mm

Colour: White

Front Door Card, Rear Door Card, Boot Carpet and Interior Lining, Interior Carpet and Upholstery Fastener, Interior Side Trim, Tailgate Lining Clips and Boot Lid Lining, Roof Lining, Headlining Sunvisor and Overhead Console

You may also like

Land Rover & Range Rover Interior Trim Panel & Door Card Clips MWC9134

Original price €5,95 - Original price €15,95
Original price
€5,95 - €15,95
€5,95 - €15,95
Current price €5,95

These clips are used with a snapsac grommet that fits into the bodywork. They are fitted to at least four different Land Rover vehicles and used to...

View full details
Original price €5,95 - Original price €15,95
Original price
€5,95 - €15,95
€5,95 - €15,95
Current price €5,95

Interior and Exterior Trim Clips for Door Cards & Mouldings- Land Rover LR006101

Original price €5,95 - Original price €17,95
Original price
€5,95 - €17,95
€5,95 - €17,95
Current price €5,95

These are used on many different Land Rover models including the Freelander and some Range Rover models. The clip has a number of different uses an...

View full details
Original price €5,95 - Original price €17,95
Original price
€5,95 - €17,95
€5,95 - €17,95
Current price €5,95

Land Rover Defender Front & Rear Door Card Clips / Studs- MXC1800

Original price €5,95 - Original price €15,95
Original price
€5,95 - €15,95
€5,95 - €15,95
Current price €5,95

There are lots of variations of the Land Rover Defender but these clips were used quite consistently to mount the interior door trim panels from 19...

View full details
Original price €5,95 - Original price €15,95
Original price
€5,95 - €15,95
€5,95 - €15,95
Current price €5,95

Door Card, Trim Panel & Moulding Clips- Land Rover LR013135

Original price €6,95 - Original price €19,95
Original price
€6,95 - €19,95
€6,95 - €19,95
Current price €6,95

These trim panel clips are used on a lot of Land Rover and Range Rover models. The clips are used to attach door cards, tailgate linings, pillar tr...

View full details
Original price €6,95 - Original price €19,95
Original price
€6,95 - €19,95
€6,95 - €19,95
Current price €6,95

Red Plastic Locknut / Srrew Grommet, Land Rover CZA4705L

Original price €5,95 - Original price €14,95
Original price
€5,95 - €14,95
€5,95 - €14,95
Current price €5,95

A common and distinctive red plastic expanding nut used on the Land Rover Defender and many of the more modern Land Rover vehicles. The clip can be...

View full details
Original price €5,95 - Original price €14,95
Original price
€5,95 - €14,95
€5,95 - €14,95
Current price €5,95
vehicleclips.co.uk
4.9
782 reviews on
Cliff_image
1 year ago
Verified
Very good the item arrived quicker than I expected. I only bought a pair of seatbelt stoppers, fitted one and it looks very OEM. Fitting instructions if you are not sure how to fit these, but please read anyway. (EXTREAMLY IMPORTANT) DO NOT cut a hole in your seatbelt it WILL weaken it and make it more likely to fail when you need it most. Rather, poke a SMALL hole through the centre of the seatbelt at the required height using something with a sharp point, like a thick needle to spread the fibers apart WITHOUT cutting them, only enough to make a SMALL hole, make sure the seatbelt buckle is above the hole (Hint: press the stud through so that the flat side of the seatbelt stopper faces toward the inside of the car and the nipple faces the outside) and then push the stud with the nipple on it through the webbing making sure the fibres of the seatbelt go around the nipple. This can be quite difficult but only make the hole just big enough to allow the nipple to squeeze through, I cannot stress this enough, DO NOT be tempted to cut the fibres to make the hole bigger. Take the backing plate (the one with the hole in it) and place it over the nipple and press hard, this takes considerable force, DO NOT use pliers', if necessary use two small pieces of wood or something similar that isn't going to damage the seatbelt or the stopper to allow you to press it closed, you will feel and hear? it click closed, job done, sit back and admire your handiwork it should look very OEM. REMEMBER THE SEATBELT IS THERE TO SAVE YOUR LIFE SO DO NOT DAMAGE IT.
Show more
A reviewer_image
1 year ago
Verified
VehicleClips is a first class company with exemplary service and products. I have purchased a number of fittings for a Range Rover L322 and new VW Beetle. The website is very intuitive to use especially if you have an idea of the parts outline dimensions or a manufacturer part number. The items always arrive very quickly (almost before you've thought to order the part!) and for the high quality are very inexpensive. When I need replacement fixings VehicleClips is always the first company I go to.
Show more
A reviewer_image
2 years ago
Verified
VehicleClip's provide a fantastic service and excellent products. The website is easy to use and has very useful dimensional specifications which I used to compare and select the fixings required. This review is for the first purchase, followed by a second for another fastener and in both cases the products were perfect. The items were very competitively priced and postage was free, packages arriving within 24-48hrs of ordering, brilliant!
Show more
A reviewer_image
2 years ago
Verified
I placed my order with VehicleClips, despite receiving slightly cheaper offers from elsewhere, because the company provided fully dimensioned sketches of each of its products that enabled me to place my order confident in the knowledge that I had chosen the correct clips. An emailed confirmation order was received within seconds with a follow-up confirmation of dispatch, (complete with a tracking reference), issued on the first working day following my order. The clips were despatched using Royal Mail's standard service and arrived two days later. They were easy to install and fitted perfectly. Thank you, VehicleClips. I couldn't have wished for better service.
Show more
A reviewer_image
2 years ago
Verified
I needed to replace some clips in my elderly Ford C Max, which had disintegrated whilst removing an internal panel. From my vague description, Richard searched , not only Ford parts, but other manufacturers, to identify those I needed. Without doubt this company, and its employees represent the very best of British businesses, for service, communication, and speedy delivery. Absolutely amazing in this day and age
Show more
A reviewer_image
2 years ago
Verified
Excellent service. Very reasonable price and the clips were dispatched delivered very quickly.. I’ll be using VehicleClips again. My only extremely minor criticism is I needed these clips for a Subaru but couldn’t find them listed. I did a search using the dimensions of the broken clips I had and found them that way but they were listed as being for a Mitsubishi. This is nit picking though. Overall couldn’t fault the price and service.
Show more