Land Rover Car Trim Clips, Fixings and Fasteners

These clips are used on lots of different Land Rover vehicles from the MK2 Discovery up to the current Range Rovers. They are typically used as whe...

These clips are used across the Land Rover range to attach side skirts, radiator grilles, bumpers, undertrays and wheel arch linings. The clips are...

These clips push to fit and are easily released with a quarter turn of the head. For this reason they are often used for access panels around the e...

These black fir tree clips are used on all models of the Land Rover Defender from 1987 onwards. They are used as the bumper end cap clips and also ...

These 6mm plastic trim clips are a perfect replacement for the Land Rover clips used to attach the plastic wheel arch flare or spat on the Defende...

These twist lock clips are used to attach the tow eye covers on some Land Rover and Range Rover vehicles. The clips twist to lock the cover in plac...

This small black plastic fastener is used on some of the lower door mouldings, wheel arch trims, sill covers and rear window trims. The clip is fou...

These black plastic expanding trim clips fit into a 7mm hole and the clip locks in position when the head is pushed down. The larger 25mm domed hea...

This is common clip across the Land Rover range and is used for a wide range of purposes. The 8mm plastic rivet is found on bumpers, wheel arch lin...

This is a quarter turn clip that holds trim covers in place on a number of different Range Rover and Land Rover models. The clip pushes in and twis...

There are lots of variations of the Land Rover Defender but these clips were used quite consistently to mount the interior door trim panels from 19...

Screw fit plastic fasteners that are fitted to several Land Rover vehicles including the Freelander and Range Rover Sport. They are typically used ...

These were used by Land Rover to fit Defender interior trim panels. They are a basic fir tree clip and so will also be suitable for other purposes.

These fir tree clips fit perfectly in Land Rover Defender headlinings. If the headlining is recovered or insulated and you need longer clips, these...

These clips squeeze together and then expand when released to hold firm. The clips are used on many modern Land Rover and Range Rover models to sec...

These clips are used with a snapsac grommet that fits into the bodywork. They are fitted to at least four different Land Rover vehicles and used to...

This part is used with the twist lock bolt (FCP0755) that holds the two covers in place on the front and rear bumpers. These covers hide either the...

These plastic fasteners are used to secure brake lines in position. The clip connects the brake line to the chassis. This type of clip is used on s...

Interior trim panel clips used on the Discovery Mk1 and Mk2. These clips work with a snapsac which fits into the metal bodywork. These are specific...

These black plastic fasteners are used to attach the front wheel arch trims on the Land Rover Discovery 3 and Discovery 4.

This small plastic clip is used on several Land Rover models to secure the insulation to the underside of the bonnet.

These are simple plastic fasteners fitted by Land Rover to keep the splashguards in place on the front wheel arches of the MK2 Land Rover Discovery.

These clips are used on many different Land Rover and Range Rover models. The plastic clips are used to secure the front grille.

These clips are a good alternative to the Land Rover part number YOO5098. The clip is used by Land Rover to attach windscreen cowls and interior tr...

These are very distinctive and unique trim clips used to attach the plastic trims either side of the rear window on the Land Rover Freelander L314 ...

Used to attach exterior pillar trims on several Land Rover models. These small black grommet fit into holes in the bodywork of the main body.

8mm Pillar trim clips used on a number of different Land Rover vehicles including the Freelander, Range Rover Sport (L320) and Evoque. The clip is ...

These distinctive expanding plastic rivets are fitted to several Land Rover models including the Freelander Mk1. That model uses them on the wheel ...

These clips are used by Land Rover to secure the bonnet release cable through the engine bay on several of their models including the new Defender ...

These nuts are used on some Land Rover models to attach trim panels and body parts. One example use is Range Rover P38 Side Body Moulding Strip nut...

These are positioning grommets that fit into the bodywork of the car. The tail lights have lugs on them that then fit into these grommets.