Ford Car & Van Trim Clips, Fixings & Fasteners

A very common expanding trim clip used by Ford, Vauxhall, Opel and Chrysler on a number of different vehicles. The clip is commonly used for the in...

These Torx headed screws are used to secure a range of parts onto modern Ford vehicles. They are common on engine undertrays, wheel arch linings, b...

These are very widely used across the Ford range since the 1990s. The clip is common on a lot of Ford models and is a utility clip used to fix anyt...

Widely used by Ford for wheel arch linings and bumpers, these are a strong 9mm push fit plastic rivet. The centre pin pushes in to expand the clip ...

These tiny black clips are used on several Ford models including the Ford Mondeo, S-Max, Galaxy and Escort. The clips are used to fasten the rubber...

These clips are widely used by Ford across their range of cars and vans. They are used on interior and exterior trim. Some vehicles use them for do...

These 8mm push fit clips have a distinctive oval shaped head that pushes in to expand the pins and hold in place. The clips are used on some Ford m...

These black fir tree clips fit into a 7mm hole. The plastic clips are used on cars such as the Ford Mondeo, Focus or Fiesta. The fastener is normal...

Common and widely used screw fit plastic fastener. Ford use these for shields, splashguards and other trim panels.

These heavy duty plastic rivets fit into an 8mm hole and are used by Ford on many of their cars and vans. The clips are used on a number of differe...

A 6mm plastic rivet that expands to lock in position when the head is pushed in. These clips are used on Ford cars and vans to secure panels or tri...

These are very popular and widely used on Ford passenger cars and commercial vehicles. The clips are normally used for attaching insulation panels ...

These distinctive clips are used on some Ford cars and commercial vehicles. The clip head turns to unscrew and release the clip. They are normally ...

These plastic rivets are common on many different Ford vehicles from the Ranger to the Fusion. They are used in different places on different vehic...

These are positioning grommets that fit into the metal bodywork of the car. The tail lights have lugs on them that then fit into these grommets.

This part is used on modern Ford cars and vans. The grommet is typically used for mounting front or rear lamps and bumpers.

These clips are used on Ford vehicles to secure a wide range of parts. Example uses are front grille clips, engine bay shield fasteners and wheel a...

This clip is common across a lot of different manufacturers. An example fitment is that it used by Ford to attach the rear wheel arch linings on th...

These fasteners are used to secure the upholstered sound deadening fitted to the underside of the bonnet. The clips are squeezed together to fit an...

These blind rivets are used by Ford on some vehicles to secure bumpers and other body parts. It is a standard rivet but comes with a plastic end ca...

These clips are used to mount the front and rear door cards onto to several Focus, C-Max and Ford Kuga models. The clip includes a rubber seal and ...

These fasteners are used to secure brake lines on many, but not all, modern Fords.

These clips are a high quality replacement identical to the OE parts. Ford use these plastic push fit rivets for a variety of uses. They can be fou...

These 8mm plug style fir tree clips are used on some models of the Ford Transit for exterior trim panels. Some Ford cars also had these clips fitte...

These black and white trim clips are normally used as Ford door card clips but are also used on the roof lining of some Ford Transit models. They a...

These door card and trim panel clips are used by Ford on a number of vehicles. In particular they are the front door card clips used on the Ford Pu...

These clips are used on the tailgate of the Ford Fiesta Mk5 and the Ford Fusion to attach the parcel shelf cords. The parcel shelf clips fit into t...

These small edge clips are used on some Ford models to secure the plastic windscreen cowl that covers the wiper motor and linkage at the bottom of ...

This clip fits into an 8mm hole. They are used on several Ford models for securing interior or exterior trim panels.

These clever clips push to fit and can be released with a quarter turn of the screw head. They are perfect for panels where access may be occasiona...

These distinctive fir tree fasteners are used on many modern Ford cars and vans. The clips are a simple barbed push fit spruce or fir tree clip. Th...

Used on several Ford cars and commercial vehicles, these clips are normally used as wheel arch lining clips, interior trim panel clips or upholster...

These black clips are used the attach the trim cover to the sliding door rail on the outside of the Transit Custom and Tourneo from 2012 to 2023.

These are the plastic trim clips that are used to attach the sound deadening to the underside of the bonnet on the TT9 Ford Transit made between 20...

These clips are used on a few of Ford's commercial vehicles. The clips are used to hold exterior bodywork trim panels in place such as side mouldin...

This is a bonnet stay holder that the rod clips into when not in use. They get brittle over time and can break. These are simple replacement to kee...

These are a trim panel and body moulding fastener used by Ford on some cars and commercial vehicles.

These black plastic rivets fit into an 8.5mm hole and are perfect for VW and Ford van linings. The clips are long and suitable for thicker ply, ins...

This type of clip is often used on interior pillar covers. The clip fits onto a lug on the trim panel and then pushes into a hole in the metal body...

Used on various engine bay shields by Ford and may also be used for interior trim panels.

This part has the Ford Finis part number 6181023 and is used on some older Fords such as early model Fiesta, Escort and Focus cars. The clip fits i...

These are small black fasteners used on a small number of older Ford vehicles. The clips are typically used for interior upholstery, carpets and tr...

These black clips are used on the latest model of Ford Kuga (2020 onwards) to attach the side skirts or sill cover mouldings.

These are easy to recognise with their rectangular collar. They are used on older Ford cars, normally on wheel arch linings or splashguards.

This fir-tree fastener secures parts such as interior and exterior panels, wheel arch liners and splash guards to the vehicle where a 10mm hole is ...