[CloudSearch app] All products

Moulding clips used to attach trim panels and pillar covers on the inside and out side of the vehicle.

These small plastic fir tree clips are perfect for holding panels or trims in place. They fit into a fairly small 7mm hole but the wide 24mm diamet...

These black plastic locknuts or screw grommets fit into 10mm square hole. The grommet fits into a hole in the metal bodywork and allows a screw to ...

This is a common fastener used around the dashboard and centre console of many modern VW cars and vans. The screw is an M5 thread.

Used on several models for securing trim covers, mouldings and control units.

These simple 8mm push fit plastic rivets expand when the centre pin is inserted. They are used by different manufacturers including Smart who use t...

This is professional grade black insulation tape adhering to BS EN 60454-2. The tape is flame retardent, extremely flexible and with good adhesion....

These very dark grey push pin rivets are used by Mercedes on many different vehicles. The clip is normally used to secure engine shields and radiat...

These metal spring clips are used on many different Mini models to secure interior trim panels. They are found on parts such as door cards, dashboa...

These are the clips used on most BMW cars to secure the under bonnet insulation. The clip is a simple button fastener that pushes in and clicks in ...

These distinctive clips are used to hold and secure the splash guard liner around the wheel arch.

These green trim panel clips are used to secure interior trim panels and door cards on some Mercedes cars and commercial vehicles. The clips have p...

These screw grommets fit into a square 8mm hole. They are very common on modern Hyundai cars and used on almost all models to help fasten door pane...

These heavy duty fasteners are typically used for larger trim panels such as bumpers, under body shields, side skirts and wheel arch linings. The c...

These are a standard screw grommet used to attach parts or trims onto metal bodywork without having to screw directly into the metal.

The screw fit trim clips have an unusual hex head on the pin. They are fitted to some BMW models to retain the sill mouldings or side skirts. Other...

Small metal edge clip normally used by SEAT for screwing in bumpers and arch linings.

Each of these fasteners includes a foam sealing washer. Example uses include Mazda CX-3 and CX-5 wheel arch flare and side moulding clips. The clip...

These small fasteners clip into position to secure the radiator grille on some models of the Pajero, Shogun and L200. The clips are high quality af...

These green clips are common on Vauxhall door cards and some other interior trim panels. Our clips are high quality aftermarket equivalents produce...

These distinctive and rectangular headed bolts are used as Vauxhall Corsa wheel arch flare fasteners. They are one of several parts used to attach ...

Very widely used across the Vauxhall model range, these clips are almost always used on or around the front bumper and radiator grille. The nut fit...

These 6mm scrivets or screw fit plastic rivets have a Torx head and are used by VW on a number of different vehicles. The plastic clip is fitted to...

This is a part used by Ford and is also a good universal trim clip. The shaft is quite long and suitable for thicker panels and heavy duty uses suc...

Commonly used by Peugeot and Citroen for wheel arch linings, splashguards and bumpers, this clip is also found on windscreen cowls, engine undertra...

These are very widely used across the VAG group. The grommet is used on a large number of parts including around bumpers, sills, side skirts, wheel...

These take an M4 screw and fit into an 8mm square hole. They are a good universal part used to fasten parts or trims to metal bodywork. This partic...

This is a bonnet stay holder that the rod clips into when not in use. They get brittle over time and can break. These are simple replacement to kee...

These are more commonly found on Toyota cars but are also used by Peugeot on vehicles that they have produced in collaboration with the Japanese ca...

These plastic screw grommets fit into a 10mm square hole. They are often used by Mazda for door cards and other interior trim panels.

These distinctive clips are used on interior and exterior panels such as tailgate and boot linings, wheel arch splashguards and engine bay shields.

These square push fit plastic rivets are very common on modern Mini cars. The clips are used for wheel arch flares, wheel arch linings, bumpers, bo...

Our reflectors are produced in Austria by one of Europe's biggest brands. They are all road legal and E-Approved. This means they are suitable for ...

Our range of hose connectors are available in small packs or in larger bulk purchases. They are suitable for a range of uses and are made from toug...

These metal spring fasteners are used to attach fascias and trim panels to items such as door cards, dashboards and seat backs. These parts are hig...

These clips are used on several older BMW models including the E36, E34 and E38. The clips is used in different places on each model but are used t...

This fastener is used to secure the door entrance sill moulding or scuff plate trims. This particular clip is used on many different models from th...

Complex screw grommet that twists and locks in position. This part is used on many different modern Mini cars and is normally used on exterior pane...

These clips are used for mounting trim, bumpers, lighting and other parts into position. The grommet fits into a square hole in the bodywork. A scr...

These distinctive fir tree fasteners are used on many modern Ford cars and vans. The clips are a simple barbed push fit spruce or fir tree clip. Th...

These single use 7mm black fir tree clips are used by VW on several different models. The clips are black with a 20mm diameter head. They are used ...

This is the clip that the bonnet stay attaches to when not in use. They are easy broken and if not used, can result in rattles or the support rod b...

These are used on a number of different Mercedes models for attaching door cards and interior trim. Each clip includes a black foam sealing washer.

Used to attach the A-pillar plastic mouldings on the exterior of the car next to the windscreen. The clips come fitted with the foam sealing washers.

These clips are used across the Audi range for everything from mounting sensors to underbody shields and interior carpets and upholstery. All of ou...

These clips are used to fit the front and rear door card onto the Mk2 Ford Galaxy (2000-2006). These are a high quality aftermarket alternative part.

These 8mm plastic push fit rivets are used to attach trim panels onto bodywork. They are used on some Porsche models for securing parts such as bum...

One of several styles of metal retaining clamps used by Volkswagen on the underbody shields.