[CloudSearch app] All products

These distinctive clips are used on modern Audi vehicles for sill mouldings and side skirts. The clip is an expanding plastic rivet with an allen k...

This clip is a simple to fit push rivet and releases easily with a quarter turn of the head. They are often used on panels which require access.

These plugs fit into holes in the bodywork or in plastic side skirt or sill trims. Each clip has a small rubber o-ring seal around the stem.

Used to attach exterior pillar trims on several Land Rover models. These small black grommet fit into holes in the bodywork of the main body.

These are a very common clips fitted to most Audi and VW cars in the last 30 years. They are a standard screw grommet and are used throughout the v...

These small yellow clips are used on some Land Rover vehicles for mounting lights and trim to bodywork.

These are a very common metal clip on Volkswagen vehicles. Typical uses include door sill cover trims, tailgate linings and interior pillar covers.

These blue plastic trim clips are used on several Nissan models. The clip is often used for interior trim panels such as pillar covers and boot lin...

This type of unthreaded plastic nut is normally used on a coarsely threaded stud attached to the bodywork. The nut cuts a thread as it is tightened...

These two piece clips are widely used throughout the first Vivaro vans. The clips are normally used on interior trim panels such as door cards, cab...

These 6.5mm fir tree clips used by Peugeot and Citroen have an 18mm head. The black clip is used in lots of different places depending on the car. ...

Common Honda bonnet insulation fastener used across many of their range of cars.

These clips fit into a grommet mounted in the bodywork. They are used for attaching door cards and interior trim panels onto some Jaguar cars. Each...

These clips are used on pillar trims across a lot of the VW, Audi, Seat, Skoda and Porsche ranges. There is an identical clip available in white al...

These parts include the rubber grommet as shown in the photo. They are used for attaching the bump strips that run along the side of the car and th...

These metal fasteners are used on many different BMW models. Typically uses include wheel arch linings, splash guards and undertrays. They are also...

These distinctive trim clips are used on bumpers, shields and undertrays. They fit into a 9mm hole and have a wide 33mm collar.

These white trim clips are common on many modern cars. Jaguar use them to attach door cards, boot and tailgate linings as well as pillar trims. The...

Our reflectors are produced in Austria by one of Europe's biggest brands. They are all road legal and E-Approved. This means they are suitable for ...

This small expanding plastic rivet fits into a 5mm hole. It is used on some Subaru models for securing bumper trims and windscreen cowls.

These plastic retaining clips are used to attach trim panels onto sills and apertures such as the boot. They are used on the Nissan Micra K12 to at...

These clips are used on parts such as pillar covers and tailgate linings. The metal clip fits onto a lug on the trim. The lug and metal spring clip...

The plastic clip that is used to secure the bonnet stay in position when not in use. These parts can easily be damaged or broken which can result i...

A simple push pin expanding rivet for use in a 7mm hole. This clip is used to secure trim panels. When the centre pin is pushed in, the stem of the...

These plastic screw grommet or locknuts are very widely used on modern Vauxhall cars. The clips are fitted into the metal bodywork of the car and a...

One of the most common sump plug washers for Toyota cars and vans.

These make an excellent universal plastic rivet for an 8mm hole. The pin has a long barbed shaft which expands when activated and so these are suit...

These small white clips have a canoe shaped head that fits inside a rubber door seal. The clip then clicks into position on the door frame to secur...

These wide collared plastic push fit trim clips are used on some of the latest Alfa Romeo models including the Stelvio and the Giulia. The clips ar...

These button clips are used to secure the rubber seals in place that run around door apertures and bonnets on some Nissan vehicles.

These are used to hold the fabric bonnet insulation sheets in position on the underside of the bonnet. They can get damaged or lost and this result...

These clips are used to attach the large plastic mouldings fitted to the doors on the RAV4 (1995-2000). The clips are each fitted with a foam seali...

These clips join the wheel arch lining or splashguard to the wing. The clips fit along the edge of the lining and then allow it to be screwed onto ...

This plastic clip twists 90 degrees to lock in place. It is used on the underbody shields and engine undertrays on at least 3 different Audi models...

These expanding plastic rivets are used on several models of Mini. The wide collared clips are normally used to hold flexible panels such as bonnet...

These grey plastic trim clips with a black rubber seal are used on many modern Volkswagen cars. The clip is used to attach parts such as wheel arch...

These small edge clips are used on some Ford models to secure the plastic windscreen cowl that covers the wiper motor and linkage at the bottom of ...

These blue trim clips are used on some Ford vehicles including for the exterior tailgate trim moulding on some Mondeo models.

These white trim panel clips are used on some Honda models, normally to attach door sill cover mouldings. They have also been used to attach trim p...

Red fasteners used on side skirts, sill covers and wheel arch flares.

These are a simple push fit plastic rivet that expands and locks securely in position when the centre pin is inserted. The clip fits into an 8mm ho...

These yellow and white trim clips with a rubber seal are used to securely mount the front and rear door cards on several Fiat cars. The clips have ...

Used on the Peugeot Partner vans, these moulding clips are used to attach the plastic exterior trims that run along the sides and rear of the vehic...

Typically used by Citroen on front and rear bumpers, this part is more often seen on Toyota cars. The clips is fitted to the C1 which was produced ...

Seat use two clips like this one that just vary in length. This version is 22mm long and there is also a 16mm version (Our part number FCP-0404). T...

This is a distinctive looking clip with an almost semi circular head. The clip is used by Honda on a number of different cars to attach the windscr...

These are a universal part very common on a wide range of models. The clip fits into a 5mm hole in the bodywork, while the longer canoe-shaped head...