[CloudSearch app] All products

This clip is a simple to fit push rivet and releases easily with a quarter turn of the head. They are often used on panels which require access.

These clear trim clips are used to attach the decorative trims that run on the doors and across the dashboard on some BMW models. The clips have a ...

These clips fit into a grommet mounted in the bodywork. They are used for attaching door cards and interior trim panels onto some Jaguar cars. Each...

These rectangular collared retaining clips are normally used for the foam bumper impact absorption panels fitted behind the bumper covers.

These black plastic rivets fit into an 8.5mm hole and are perfect for VW and Ford van linings. The clips are long and suitable for thicker ply, ins...

These distinctive green trim clips are used on the exterior pillars on many modern Mazda vehicles. The clips hold the lightweight plastic trim in p...

These small white clips are used to secure trim and fascia panels on the interior of several Hyundai models.

These make an excellent universal plastic rivet for an 8mm hole. The pin has a long barbed shaft which expands when activated and so these are suit...

These clips are used on the Land Rover Discovery mk2 to attach rear bumper trims but they are also used on the Freelander mk1 to attach the tailgat...

Unthreaded plastic nut used for securing trim panels and shields to metal bodywork studs. These are used on many different Mini cars to attach pane...

These trim panel clips are used on early models of the Smart Fortwo. They are used on parts such as the boot lining panels. The original clips may ...

This type of clip attaches to a barbed stud or shaft that is normally attached to the bodywork. The clip slides onto in and secures items such as c...

These small clips are easy to fit and easy to release. A quarter turn of the head is enough to release the centre pin and allow them to be removed....

This plastic clip twists 90 degrees to lock in place. It is used on the underbody shields and engine undertrays on at least 3 different Audi models...

Moulding clips used to attach trim panels and pillar covers on the inside and out side of the vehicle.

These clever clips push to fit and can be released with a quarter turn of the screw head. They are perfect for panels where access may be occasiona...

A simple trim panel clip that is used to mount interior trim panels to some Land Rover vehicles.

These push fit plastic rivets are used on models such as the Jaguar XF to secure the windscreen cowl at the bottom of the windshield.

These chunky, push fit plastic rivets fit into a 15mm hole. They are used by Suzuki to hold sill covers or side skirts into position on vehicles su...

These clips are used by Vauxhall / Opel on the 2018 onwards Vauxhall Combo and Combo Life. The blue plastic fasteners are used to attach the plasti...

These are a very common metal clip on Volkswagen vehicles. Typical uses include door sill cover trims, tailgate linings and interior pillar covers.

Our reflectors are produced in Austria by one of Europe's biggest brands. They are all road legal and E-Approved. This means they are suitable for ...

Our range of hose connectors are available in small packs or in larger bulk purchases. They are suitable for a range of uses and are made from toug...

These plastic retaining clips are used to attach trim panels onto sills and apertures such as the boot. They are used on the Nissan Micra K12 to at...

This plastic fastener fits into an 8mm diameter hole and expands to securely lock in place when the centre pin is inserted. They are used by Audi o...

Distinctive yellow and white trim clips with a rubber seal that are used to securely mount the front and rear door cards on the Jeep Renegade. The ...

Seat use two clips like this one that just vary in length. This version is 22mm long and there is also a 16mm version (Our part number FCP-0404). T...

These two piece clips are widely used throughout the first Vivaro vans. The clips are normally used on interior trim panels such as door cards, cab...

These 6.5mm fir tree clips used by Peugeot and Citroen have an 18mm head. The black clip is used in lots of different places depending on the car. ...

Common Honda bonnet insulation fastener used across many of their range of cars.

Easy release push fit plastic trim clips used by Kia to attach parts such as bumper trim, wheel arch linings and some interior panels. The centre p...

These clips are used on parts such as pillar covers and tailgate linings. The metal clip fits onto a lug on the trim. The lug and metal spring clip...

These are a simple push fit plastic rivet that expands and locks securely in position when the centre pin is inserted. The clip fits into an 8mm ho...

These plastic clips are used on the Jeep Renegade to secure rear wheel arch linings and around the front bumper. The clip fits into an 8.5 or 9mm h...

Used for interior trim panels, normally door cards or tailgate linings. These green plastic trim clips are fitted to several Hyundai cars including...

These are simple push fit fasteners that expand when the centre pin is inserted. They are used by several manufacturers including Mercedes. Mercede...

These plastic screw grommet or locknuts are very widely used on modern Vauxhall cars. The clips are fitted into the metal bodywork of the car and a...

These distinctive clips are used on some side moulding trims, wheel arch flares and side skirts or sill covers. The black part of the fastener slid...

Used on several Vauxhall models, these clips are fitted by pushing in the head to expand the insert and lock into place. They are used on dashboard...

These clips are used on a number of MG and Rover vehicles to attach the protective plastic kick plates on the door sill. The clip is quite distinct...

These are a standard screw grommet used to attach parts or trims onto metal bodywork without having to screw directly into the metal.

These are a very common clips fitted to most Audi and VW cars in the last 30 years. They are a standard screw grommet and are used throughout the v...

These clips are used on pillar trims across a lot of the VW, Audi, Seat, Skoda and Porsche ranges. There is an identical clip available in white al...

This plastic push fit clip is a standard grey rivet style fastener. They fit into an 8mm hole and are a good universal fastener that can be used fo...

Indasa double sided moulding tape is a high quality tape for professional use. The 0.8mm thick foam tape has a strong adhesive to firmly bond mould...

These cable ties are used to secure wiring looms and washer hose on vehicles across the Volkswagen group range. The clip fits onto the edge of a b...

These blue plastic trim clips are used to attach parts such as roof console, brake light covers, tailgate linings and pillar trims. They are used o...

These plastic rivets are used to secure front and rear bumpers, radiator surrounds and engine bay trims. They fit into a 10mm hole.