[CloudSearch app] All products

Mitsubishi bonnet insulation clips used to hold the fabric sound proofing panels in position on the underside of the bonnet. These clips fit into a...

These plastic clips are used on the Jeep Renegade to secure rear wheel arch linings and around the front bumper. The clip fits into an 8.5 or 9mm h...

These little round push button clips are used to secure rubber weather strips and seals in position. They are normally used by Honda on the seals t...

These fir tree clips are for mounting interior trim panels such as door cards. The head twists into the mounting point on the panel allowing the cl...

Each fitted with a rubber grommet, these clips are perfect, high quality replacement to the OE parts. The clips are used to attach the plastic moul...

A two-part clip including an 8mm retainer that fits into the bodywork of the vehicle and a press stud. The stud has a mottled patterned head and lo...

This clip fits into an 8mm hole. They are used on several Ford models for securing interior or exterior trim panels.

This clip is a simple to fit push rivet and releases easily with a quarter turn of the head. They are often used on panels which require access.

These chunky push fit plastic rivets are a heavy duty fastener used by Subaru. The clips are common on some of the more modern Impreza, Forester an...

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Citroen models. They are used on several models normal...

These clips are extremely common across the Toyota range. The clips are normally used around the edges of the wheel arch. They mount onto the wing ...

These clips are used on some of the Peugeot and Citroen cars that are produced with Toyota. They are used as front and rear Citroen C1 bumper clips...

This trim panel clip is very widely used by Toyota on interior trim panels such as the pillar trims, sill mouldings and boot linings.

These clear trim clips are used to attach the decorative trims that run on the doors and across the dashboard on some BMW models. The clips have a ...

A standard 8mm push fit plastic rivet that is used on several models made by Mitsubishi. These plastic fasteners are used on arch linings, mudguard...

Moulding clips used to attach trim panels and pillar covers on the inside and out side of the vehicle.

These small black clips are used to attach door seals and weatherstrips that run around the apertures of the vehicle. The canoe shaped end of the c...

A simple trim panel clip that is used to mount interior trim panels to some Land Rover vehicles.

These distinctive door card clips are used across the VW group including for Porsche. They are used on the Porsche 911 (997) and the Porsche 987 Ca...

These pinch-to-fit clips are used to secure the bonnet insulation on most modern Jaguar models. It's also used on some interior carpets and sound d...

Small white plastic clips used for securing external trim mouldings into position on some modern Jaguar cars.

These twin access clips will hold hose diameters between 4 and 6mm. The clips fit into a 6.5mm hole.

Our range of hose connectors are available in small packs or in larger bulk purchases. They are suitable for a range of uses and are made from toug...

These fit into a 5mm diameter hole and have a head diameter of 18.4mm. The black plastic trim clips are used on several BMW models such as the E70 ...

These clips are used by Hyundai for mounting parts and trim to the metal bodywork on several of their models. An example use is for the wheel arch ...

This small push pin plastic rivet is normally used on VW cars to attach interior trim panels and linings. The clip is used on centre consoles, dash...

The small moulding clips are normally used by BMW to secure the plastic windscreen cowl in position. This is the plastic cover that runs along the ...

The clips screw into the main carpet of the vehicle. The other side of these clips include the coarser half of a hook and loop fastener (Velcro-sty...

These two piece clips are widely used throughout the first Vivaro vans. The clips are normally used on interior trim panels such as door cards, cab...

These small white plastic grommets come with integrated rubber seals. They are very commonly used on Audi cars. They are used in a wide range of pl...

These are a standard screw grommet used to attach parts or trims onto metal bodywork without having to screw directly into the metal.

Common Honda bonnet insulation fastener used across many of their range of cars.

These are a simple and distinctive push fit expanding plastic rivet. The parts are used on lots of different vehicles for items such as arch lining...

These clips are used to lock twist lock bolts in place. This is the retainer that the key of the bolt pushes into and then turns to lock in place. ...

This is one of three type of side moulding clip used on the 3rd generation of VW Golf. Each moulding uses a different combination of the three clip...

These simple white plastic guide runners are used to guide the door windows as they slide up and down. The clips fit inside the frame, underneath t...

These black plastic clips have a metal spring insert that grips the lugs of a trim panel when inserted. The clips are normally used for interior tr...

These yellow fasteners are used on the Smart Roadster to secure the front wheel arch lining to the wing and some bumper trims in position.

These make an excellent universal plastic rivet for an 8mm hole. The pin has a long barbed shaft which expands when activated and so these are suit...

These pink plastic fasteners are used on side mouldings, sill covers and wheel arch flares.

These are common on vehicles produced by Audi. The clip is normally used to hold plastic trims in position in locations such as dashboards, door ca...

These screw fit plastic fasteners are used on some Fiat models normally to secure bumpers and wheel arch linings. The clips fit into an 8.5 or 9mm ...

These long fir tree clips are used on some models of the Renault Kadjar to secure trim panels and carpet in the boot area. They fit into an 8.5mm h...

This simple screw fit rivet fits into a 5mm hole and is used to fasten bumpers and other trim panels in place on some models of Peugeot cars.

These clips are used on various Seat models including the Ibiza, Leon and Mii. The clip is a standard 8mm push fit rivet that is used to hold panel...

This is a widely used yellow / orange clip found on the rubber weatherstrip seals and also on the door membrane. They are used on a number of diffe...

This type of clip attaches to a barbed stud or shaft that is normally attached to the bodywork. The clip slides onto in and secures items such as c...

One of many clips used for attaching the side mouldings and trims on to various Toyota models including the Land Cruiser Prado. There are a lot of ...