[CloudSearch app] All products

These clips are fitted to many Peugeot cars and vans. The bonnet prop rod is held in this clip when it is folded down and not in use. They are quit...

These interior trim panel clips are popular on modern Mercedes cars and vans. The clip is often in different colours including white, green or beig...

These clips are normally white, red or clear but they're not visible when fitted. The ones supplied from us will be as shown in the photo. These pa...

A standard and simple 7mm push fit black plastic rivet. These simple clips expand when the centre is pushed in and the clips lock in position. This...

These clips fit into a 10mm hole and are normally used on Mercedes cars for pillar trims, tailgate trim covers and boot lining panels. The clips ar...

Used on several models of the Vauxhall Corsa and Astra, these large, distinctive plastic clips are used to fasten side skirts or sill moulding trim...

This is a small kit of two BMW parts used to fit the floor mats in a number of older BMW models. The centre pin twists 90 degrees to lock in place ...

Kia and Hyundai use many different clips that look almost identical to these. The clips are normally colour coded so it's important to check that t...

These white clips are used to attach exterior trim. An example fitment is for the side skirts and sill mouldings on the Jaguar XE (not including R-...

Widely used by Smart, these clips fit into a 6.5mm diameter hole. The clip is used on parts such as bumpers, side skirt and arch linings and on mod...

Interior trim panel clips used on the Discovery Mk1 and Mk2. These clips work with a snapsac which fits into the metal bodywork. These are specific...

A common screw grommet fitted to many Audi vehicles. The clip is used throughout and example uses are wheel arch linings, pillar trims, door cards,...

Small screw grommets used for mounting trim panels and parts onto metal bodywork. These little clips fit into a 7mm square hole and are used by VW ...

These white clips are normally used to attach exterior trim panels to the rear tailgate on some Honda cars. The clips are typically used on the str...

These are used on a number of different Toyota cars from the Auris to the Avensis and up the Lexus LFA. They can be used in many different location...

These clips are known to be easily damaged. They are very brittle and small knocks in the car park can cause a couple to pop out of place and for t...

These flexible plastic blanking plugs are used to seal holes in bodywork or trim panels. Most vehicles have a number of access holes in the bodywor...

Bonnet insulation fasteners suitable for almost all modern Hyundai cars. These are used across the Hyundai range to attach the sound deadening fabr...

These 7mm clips are used on modern Subaru models including some models of the Subaru Legacy, Outback and Impreza. The engine bay clips are used to ...

These small clips are used on lots of different Mercedes models. The lower weatherstrip clips are used on some models of the SLK, CLK, E-Class and ...

These chunky screw fit plastic trim clips are used on some Jaguar models to attach air deflectors and shields around the engine bay and radiator. T...

this grey plastic grommet fits into the metal bodywork of the vehicle. A second clip attached to the wheel arch flare or wheel arch trim is then pu...

Plastic unthreaded nut used for various purposes and widely across the BMW range. They are not threaded inside and so normally tighten onto a coars...

These push fit plastic rivets are used to clip on insulation, trim panels and shields. The clips are used on several modern Mercedes models but the...

These fasteners are used to secure brake lines on many, but not all, modern Fords.

A black plastic fastener used to attach interior pillar trims, door cards and tailgate lining panels. The clip is a two part clip designed to come ...

These simple trim clips are normally used to attach upholstered or fabric panels in position. In particular they are used by Mercedes to fasten the...

These small white plastic grommets come with integrated rubber seals. They are very common on the BMW and Mini range and are used in a wide range o...

These clips are a high quality replacement identical to the OE parts. Ford use these plastic push fit rivets for a variety of uses. They can be fou...

These simple push-fit plastic expanding rivets are used on the Subaru BRZ for many interior and exterior panels and trims. Uses include the tailgat...

These are one of the most common Citroen clips used right across their range. At our last count these were used on at least 24 different Citroen ca...

These yellow exterior trim clips are used by Jaguar to attach side skirts or sill cover body mouldings. They are a high quality alternative to the ...

Indasa double sided moulding tape is a high quality tape for professional use. The 0.8mm thick foam tape has a strong adhesive to firmly bond mould...

This clips are used on underbody shields and insulation panels to attach the shields in place.

These screw fit black plastic rivets are used on some Jaguar models. Typical fitments include for bumpers, arch linings or interior trim panels.

These small fir tree clips are used on some BMW models for securing lightweight pieces such as rubber weatherstrip seal corners or interior trim pa...

These white plastic trim clips are used by Kia for interior mouldings including door cars, sill covers and pillar trims.

These grey fasteners have a large rectangular collar. They fit into a 10mm hole and expand when the centre pin is inserted. They are used to attach...

These clips are used on many different cars and commercial vehicles within the Volkswagen group including models produced by Audi, SEAT, Skoda and ...

These black blanking plugs or blind grommets are suitable for use on metal panels with a 2mm thickness. The plug is identical to Nissan part 80874-...

These clips are a perfect fit for the standard holes in VW vans. They are longer than the original clips and so they allow for thicker panels to be...

These clips are a high quality replacement identical to the OE parts. Mazda use these plastic push fit rivets for a variety of uses. They can be fo...

These small white locator grommets fit into hole in the bodywork. A trim panel is then attached either using a locator on the trim, or a self-tappi...

These round headed, plastic button clips push through the rubber seals at the front and rear of the bonnet to fix them in place. They are used on s...

Expanding screw fit rivets such as these will normally be used wheel arch linings, bumpers, under trays and sill mouldings.

These edge nuts are used to attach parts such as engine undertrays, bumpers, splashguards and interior trim on Honda cars as well as fairings and c...

This small plastic clip is used on several Land Rover models to secure the insulation to the underside of the bonnet.

These white trim clips have a rubber seal to keep moisture out of the body panels. The part is used on exterior plastic trims such as those on the ...