Citroen Car & Van Trim Clips, Fixings & Fasteners

These clips are by far the most common clip we know of on Citroen cars and vans. It is fitted to at least 20 different models and is still in use o...

This part is easily damaged or lost but very simple to replace. The centre pin of the clip is pushed in to lock the clip in place and the parcel sh...

These Torx head bolts are used on several Citroen models for securing bumpers and other major body parts.

These clips are normally used for attaching exterior trim panels to the bodywork. This includes side moulding strips, tailgate trims, protective mo...

These are more commonly found on Toyota cars but are also used by Citroen on vehicles that they have produced in collaboration with the Japanese ca...

These are one of the most common Citroen clips used right across their range. At our last count these were used on at least 24 different Citroen ca...

These clips are fitted to a lot of Citroen cars and vans. The bonnet prop rod is held in this clip when it is folded down and not in use. They are ...

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Citroen models. They are used on several models normal...

These clips are used on some of the Peugeot and Citroen cars that are produced with Toyota. They are used as front and rear Citroen C1 bumper clips...

These small black clips are used to attach door seals and weatherstrips that run around the apertures of the vehicle. The canoe shaped end of the c...

These 6.5mm fir tree clips used by Peugeot and Citroen have an 18mm head. The black clip is used in lots of different places depending on the car. ...

Commonly used by Peugeot and Citroen for wheel arch linings, splashguards and bumpers, this clip is also found on windscreen cowls, engine undertra...

Small black plastic clips used to attach the rubber door seals on some models of the Citroen C5. These clips are still current and so may be fitted...

Typically used by Citroen on front and rear bumpers, this part is more often seen on Toyota cars. The clips is fitted to the C1 which was produced ...

These are widely used across the Citroen and Peugeot range. The clip is oval shaped and is used all over the vehicles. The shape of the clip allows...

These 6mm fir tree clips are used on many Citroen cars to fasten bonnet insulation, boot linings and wheel arch splash guards. The clips fit into a...

These push fit rivets are used on some Citroen models that are made in conjunction with Mitsubishi. They are used to attach larger trim panels such...

These are fitted to some Citroen cars and vans, in particular the C-Crosser which uses them throughout. They are typically used as wheel arch linin...

These clips are simple barbed fasteners that are used on a range of vehicles to secure trim such as splash guards, wheel arch linings, boot linings...

Locking clips that are used throughout Citroen vehicles to secure parts such as floor mats, boot linings and sound insulation. The clips are distin...

These clips have a distinctive Torx style head on them. The clips fit into a 6mm hole and are used on interior and exterior trim panels such as bum...

Bonnet insulation is the sheet of fabric that is often fitted to the underside of the bonnet. On many Citroen cars and vans, this clip is used to s...

Often used on wheel arch linings or splash guards, these clips are also fitted to upholstery panels such as boot linings and bonnet insulation.

These are very common on a number of Citroen cars being used as wheel arch lining clips, underbody fasteners and bumper panel retainers. They are a...

These are very common across the Citroen range. They fit into a 6mm hole and are used for securing lightweight plastic trims. The clip has a distin...

A standard expanding plastic rivet. The clip expands and locks in position once the centre pin is pushed in. Example uses are as Citroen C1 front b...

Used across the Citroen range of cars and vans, these clips fit carpets, insulation and linings in place. They are used on many different models an...

These are not widely used by Citroen but they are fitted to some models. They are typically used as wheel arch lining clips or bumper fasteners.

These plastic discs are fitted onto threaded studs that protrude on the inside of the wheel arches or underbody. The clip pushes onto the stud and ...

High quality push fit expanding plastic rivet clips used on some of the new Citroen models that are produced in conjunction with Mitsubishi. These ...

These parts fit into holes in the metal bodywork and are used to receive lugs or screws for aligning and mounting trim panels. The clips have an in...

This clip is used on some older Citroen cars including the Citroen AX and Mk1/Mk2 Saxo. The clip is a barbed fir tree style fastener that simply pu...

Fitted to the Citroen C1, these clips are normally used by Toyota. These cars were designed and manufactured with Toyota and so some parts are now ...

A simple bonnet rod holder that maintains the stay in place when the bonnet is closed. The clip ensures the rod doesn't rattle and is safely out of...

A good universal interior trim clip, this part is used by Peugeot, Citroen, Fiat and Alfa Romeo. The clip fits into a 9mm hole and includes a pre-f...

A standard expanding plastic rivet used on the wheel arch linings of some modern Citroen and Peugeot cars. The clip fits into a 7mm hole.

These simple button clips are used to secure the bonnet sound insulation on the Citroen C1. This is the fabric fitted to the underside of the bonnet.

These are just used on a couple of Citroen models for wheel arch linings and the interior trim panels that line the load bay of some Citroen vans. ...

These long fir tree clips are used by Citroen to secure parts including bumpers and grilles.

These two part push fit clips are made from metal and plastic. The clips are typically used on parts such as wheel arch linings or for other trim p...