BMW Car Trim Clips, Fixings and Fasteners

These screws are used to attach parts such as bumpers, undertrays, splashguards and wheel arch linings. Each screw is fitted with a captive washer.

Widely used across the BMW range, these are very simple push pin plastic rivets that fit into an 8mm hole. BMW use them often on upholstery and car...

These are a very common size of body screw across all manufacturers. We list them here for BMW equivalent to their part number 07147129160. They ar...

These 6mm blind rivets or POP rivets are used on several BMW models such as the E70 X5. The clips are used to secure trim such as wheel arch flares...

The plastic POP rivets or blind rivets are used on some BMW models to secure the wheel arch flare and wheel arch linings.

These tiny black fasteners are used to secure the trim or seals that run by the door hinges of several BMW models.

Threaded plastic nuts with a 22mm diameter collar that is used on many BMW models. This is a common part with a wide range of fitments. Used to sec...

These clips are used the attach various trims to several different BMW models. The clip has a large head and is screwed into position to hold under...

These clips fit into the original floor carpet interior of some BMW and Mini cars. The clip twists into a mounting point in the floor of the car an...

Fitted on several models, these are typically used on larger trim panels or upholstery such as bumpers, side skirts and boot linings. The clip is a...

These are used on some of the older 3-Series and 5-Series BMW models such as the E36 and E39. They are a standard 5mm push pin plastic rivet. They ...

These push fit retainer clips are used on many modern BMW cars to attach interior trim panels and door cards. The clips push in to expand and lock ...

This wide collared trim is used on loose fitting trims and insulation panels. It is common on interior carpet linings, bonnet insulations and other...

These are distinctive screw grommets used by BMW on most of their recent vehicles to secure door cards and trim panels. The clip is unusual in that...

These small parts are used with twist lock or barbed fasteners that typically hide access panels on BMW cars. This might include a panel in the boo...

These black body bolts twist to lock into position. They are typically used for protective undertrays and shields beneath the engine and in the whe...

These 8mm plastic push fit rivets are used by BMW on engine bay shields, radiator surrounds and some interior trim panels. The clip is a standard p...

This clip is very widely used across the BMW range. It is used for a lot of different purposes. Some of the parts this clip is used with include si...

This long fir tree clip fits into a 7mm hole. The clip is used on many different BMW models to secure the seat backs onto the frame. It is also use...

This clip is used on a lot of different BMW and Mini cars produced from 2000 onwards. The clip is used for many different purposes including interi...

These are unthreaded plastic nuts that cut onto a threaded stud when first fitted. The parts are used on several different BMW models to secure par...

This is a distinctive clip used on a very wide number of BMW models. The clip is used in various places but is normally on access panels found arou...

These clips are a twist lock fastener used for access panels on several BMW cars. The clip is normally used on panels in the boot or around the das...

Plastic unthreaded nut used for various purposes and widely across the BMW range. They are not threaded inside and so normally tighten onto a coars...

These small fir tree clips are used on some BMW models for securing lightweight pieces such as rubber weatherstrip seal corners or interior trim pa...

These were used by BMW on several older models. They are a strong clip and so were typically used for larger trim panels such as bumpers, sill moul...

These Torx headed bolts are used on the sideskirts or plastic sill covers fitted to some BMW models. There are different lengths depending on the m...

These wide collared retainer nuts are used to hold shields and panels in position. This type of wide collared clip is normally used to attach flexi...

Plastic nuts used by BMW to secure loose trim items such as wheel arch linings and under body shields.

These standard push fit expanding rivets are fitted to several BMW models, typically on interior trim panels. The parts are used on items such as b...

Used on most BMW cars since 2010, these 8mm clips are normally used to secure boot linings and interior trim. The clip is a push fit rivet that exp...

The small moulding clips are normally used by BMW to secure the plastic windscreen cowl in position. This is the plastic cover that runs along the ...

These are a simple push fit plastic rivet that expands and locks securely in position when the centre pin is inserted. The clip fits into an 8mm ho...

This is an expanding push fit clip used by BMW for attaching sound deadening panels, upholstery and carpet to various models within their range. Th...

These plugs fit into holes in the bodywork or in plastic side skirt or sill trims. Each clip has a small rubber o-ring seal around the stem.

These distinctive clips are used on some side moulding trims, wheel arch flares and side skirts or sill covers. The black part of the fastener slid...

These fit into a 5mm diameter hole and have a head diameter of 18.4mm. The black plastic trim clips are used on several BMW models such as the E70 ...

These are the clips used on most BMW cars to secure the under bonnet insulation. The clip is a simple button fastener that pushes in and clicks in ...

The screw fit trim clips have an unusual hex head on the pin. They are fitted to some BMW models to retain the sill mouldings or side skirts. Other...

A simple push pin expanding rivet for use in a 7mm hole. This clip is used to secure trim panels. When the centre pin is pushed in, the stem of the...

These very simple plug clips are fitted to some older BMW models such as the E30 3-series and the E36 Z3. They are used on interior trim such as do...

A very common screw / bolt used by BMW to secure parts such as bumpers, undertrays and arch linings.

These rectangular collared clips are used on some BMW models to attach and secure the plastic trim that runs at the bottom of the windscreen and wh...

Very common on modern BMW tailgate or boot hatches, these expanding lock nuts are used to attach the plastic trim covers. This part fits directly i...

These are used on some 5-series and 6-series BMW cars to attach the side skirts or sill mouldings. BMW use several similar clips with different len...

These screws each have an 18mm captive washer. The screws are normally used for securing parts such as arch liners, splashguards or undertrays.

This black nut fits on a barbed or threaded stud. The part has a wide collar and is normally used to fasten insulation, heat shields and upholstery...

This short expanding rivet fits into a 6.5mm hole. They are typically used by BMW on lightweight panels such as the windscreen cowl, sill mouldings...