Audi Car Trim Clips, Fixings & Fasteners

These star or Torx head screws are a suitable replacement for the parts used on many Audi cars to secure the front and rear wheel arch linings or s...

A standard push fit plastic rivet which fits into a 7.5mm hole. The wide 22mm collar means the part is suitable for many different uses. It is used...

These simple plastic rivet clips are used on several different Audi models and across the Volkswagen range. They fit into an 8mm hole and are used ...

Audi use this clip to attach a range of different parts on several of their models. The clip can be found on exterior trims such as wheel arch lini...

These are very common on modern Audi cars for underbody shields, covers and splashguards. The nuts are threaded and fit onto studs already attached...

Very common across the modern Audi range, these distinctive clips actually push in to expand and clip into place. The short stem fits into an 8mm h...

These M5 screws are common across the Audi range and often used on wheel arch linings or for interior trim panels.

These are one of several types and sizes of screw grommet fitted to most modern Audi cars. They are used for mounting anything from number plates t...

These are large door card clips fitted to a few Audi models. The clips are distinctive and each one has an integrated rubber seal.

These small plastic fasteners are used on the inner wing lining on a large number of Audi vehicles. The clip is used in conjunction with a metal T-...

These are used on a lot of Audi models. The parts are normally used as Audi undertray clips for attaching protective panels on the underside of the...

These clips fit into a retainer on the trim or door card. When the trim is then located and pushed onto the bodywork, these clips lock in place and...

These black, folding plastic clips are used around the edges of the wing and wheel arch lining on many different Audi cars. The clips are quite unu...

A common screw grommet fitted to many Audi vehicles. The clip is used throughout and example uses are wheel arch linings, pillar trims, door cards,...

These rubber inserts are used with other fasteners and provide a seal and firm hold into the bodywork. This part is widely used across the Volkswag...

These plastic pins are used to attach the rear tow eye covers on a number of Audi and Volkswagen models. The clip twists in to lock or unlock the a...

These clips are used across the Audi range for everything from mounting sensors to underbody shields and interior carpets and upholstery. All of ou...

This plastic clip twists 90 degrees to lock in place. It is used on the underbody shields and engine undertrays on at least 3 different Audi models...

This plastic fastener fits into an 8mm diameter hole and expands to securely lock in place when the centre pin is inserted. They are used by Audi o...

These distinctive clips are used on modern Audi vehicles for sill mouldings and side skirts. The clip is an expanding plastic rivet with an allen k...

These are very widely used across the VAG group. The grommet is used on a large number of parts including around bumpers, sills, side skirts, wheel...

These clips are used to lock twist lock bolts in place. This is the retainer that the key of the bolt pushes into and then turns to lock in place. ...

This is one of the most common sizes of screw used by Audi for the wheel arch linings on their vehicles.

A simple push fit expanding plastic fastener which is only unusual due to the large head on the push pin. These types of clip are normally used on ...

These single use 7mm black fir tree clips are used by Audi on several different models. The clips are black with a 20mm diameter head. They are use...

A simple plastic trim clip that expands when the centre pin is inserted. This type of clip is used on many vehicle and has lots of different uses. ...

This sprung clip is very simple. The clip squeezes together to be fitted and expands once it is in place. Most Audi vehicles use these to fasten bo...

These black plastic clips fit into the doors or pillar around the B-pillar of the car. This is the pillar between the driver and passenger door. Th...

This plastic washer is used with twist lock bolts and act to hold the removable covers in place onto rear bumpers of several Audi cars. The covers ...

This is a very common part used on a wide range of vehicles all related to the Volkswagen Group. The clip is used for a variety of purposes from at...

A very common 16mm long black metal spring clip used for attaching fascias, pillar covers and interior trims. The fastener is common on a wide rang...

These 6mm scrivets or screw fit plastic rivets have a Torx head and are used by Audi on a number of different vehicles. The plastic clip is fitted ...

These are a distinctive expanding rivet used on the first Audi A3 to secure the top of the front bumper to the landing panel. There are four clips ...

Small, black metal edge clips used to fasten plastic parts such as wheel arch linings and wheel arch trims. The clip fits over the edge of two piec...

A popular 8mm push pin rivet that is used on some Audi cars to attach splashguards, bumper covers and engine bay covers.

These parts are a very high quality aftermarket equivalent to the genuine Audi part with number 8K0805121. The bolts are normally used on engine un...

These unthreaded nuts are common on modern Audi cars. They are almost always used to secure the plastic wheel arch linings. The unthreaded nut is t...

These are a new style clip fitted to most Audi models after 2015. Earlier models of the Audi A3 also use this part. The clip attaches to a metal st...

These are small push fit rivets used for lightweight trim. The fastener fits into a 4.5mm hole and expands when the centre pin is inserted.

These distinctive plastic rivets are used on a wide variety of VW, Audi and SEAT cars. The clip is used for many different purposes from engine bay...

These small plastic grommets or lock nuts are used on a range of different vehicles within the VAG group. They are used in a number of different pl...

These black interior trim clips are fitted to most Audi models produced in the 1970s, 80s and 90s. They are typically used for door cards but also ...

Used on several older Audi models such as the C4 A6 and the D2 A8, this clip is used on interior pillar covers and boot linings. The clips have a c...

These black plastic clips are used to hold shields, panels and covers in place for wheel arches and underbody trims.

These small plastic clips are used for attaching the rubber wind & weather seals to the bonnet opening on some Audi cars. The head of the clip ...

Small black metal clips which are used to secure the trim strips onto the door cards on some modern Audi cars.