Products

Used to secure the fabric sound insulation that is fitted to the underside of the bonnet on some Citroen cars and vans.

These clips squeeze together and then expand when released to hold firm. The clips are used on many modern Land Rover and Range Rover models to sec...

These barbed clips secure the fabric insulation panel that is mounted to the underside of the bonnet on some Peugeot cars and vans.

These 28mm round clips are used to attach the bonnet or hood insulation on many different models produced by Nissan and Infiniti. They can be fitte...

This small plastic clip is used on several Land Rover models to secure the insulation to the underside of the bonnet.

These pinch clips expand when fitted to hold the noise insulation in position on the underside of the bonnet. They are used on several modern Ford ...

These button clips are used to hold the sound insulation onto the underside of the bonnet.

Mitsubishi bonnet insulation clips used to hold the fabric sound proofing panels in position on the underside of the bonnet. These clips fit into a...

These distinctive clips are used to hold bonnet insulation panels in place on a wide number of Nissan models. The barbed stem of the clip fits into...

These simple, black button clips fit into an 8mm diameter hole. The part is used by Mitsubishi to attach insulation and upholstery panels in severa...

These pinch-to-fit clips are used to secure the bonnet insulation on most modern Jaguar models. It's also used on some interior carpets and sound d...

These small plastic clips are used for attaching the rubber wind & weather seals to the bonnet opening on some Audi cars. The head of the clip ...

These small plastic clips are used for attaching the rubber wind & weather seals to the bonnet opening on some Seat models. The head of the cli...

These small plastic clips are used for attaching the rubber wind & weather seals to the bonnet opening on some Skoda cars. The head of the clip...

These small plastic clips are used for attaching the rubber wind & weather seals to the bonnet opening on some VW cars and commercial vehicles....

Bonnet Release Cable & Wiring Clip identical to Lexus part number 90469-06005 / 9046906005. This black plastic clip secures the bonnet release ...

These clips are used to route the bonnet release cable on most modern Honda cars. The clips close around the cable and then clip into a 7mm hole.

These clips are used by Land Rover to secure the bonnet release cable through the engine bay on several of their models including the new Defender ...

This small and distinctive black plastic trim clip is used to attach the rubber seal in place that runs along the front and rear of the bonnet. The...

These small brown clips are used on lots of Mitsubishi models. The clip is normally used to attach the rubber seals that run along the front and re...

Bonnet insulation fasteners suitable for almost all modern Hyundai cars. These are used across the Hyundai range to attach the sound deadening fabr...

These clips pinch together to fit and then expand into the holes when they are released. They are used to hold insulation to the underside of the b...

These are the plastic trim clips that are used to attach the sound deadening to the underside of the bonnet on the TT9 Ford Transit made between 20...

These clips are used on many different Alfa Romeo models to fasten upholstery and insulation. This part is very often used to attach the sound proo...

These are the clips used on most BMW cars to secure the under bonnet insulation. The clip is a simple button fastener that pushes in and clicks in ...

These are used to hold the fabric bonnet insulation sheets in position on the underside of the bonnet. They can get damaged or lost and this result...

These button clips are used to retain the sound deadening material that it fitted to the underside of the bonnet. They are used on most modern Mini...

These parts are used to fasten the fabric sound deadening to the underside of the bonnet on several different Honda models.

These clips are fitted to many Peugeot cars and vans. The bonnet prop rod is held in this clip when it is folded down and not in use. They are quit...

These clips are fitted to a lot of Citroen cars and vans. The bonnet prop rod is held in this clip when it is folded down and not in use. They are ...

This yellow plastic clip is used to secure the bonnet stay when not in use. They often break resulting in a loose and rattling support rod. It is a...

A simple bonnet rod holder that maintains the stay in place when the bonnet is closed. The clip ensures the rod doesn't rattle and is safely out of...

This clip holds the bonnet support rod in place when the bonnet is closed. The clip keeps the rod in position and stops it rattling or being damage...

This yellow plastic clip is used to secure the bonnet support when not in use.

The plastic clip that is used to secure the bonnet stay in position when not in use. These parts can easily be damaged or broken which can result i...

These clips are used to hold the bonnet stay in position when the bonnet is closed and the stay is down. The clip holds the rod securely and stops ...

This is a common size of bonnet stay holder used on a number of Toyota cars. The plastic clip fits into a hole on or next to the landing / slam pan...

This is a common bonnet stay holder clip on Mazda vehicles. The bonnet support rod clips into this retainer when not in use. The clips can easily b...

These clips fit in a square 10mm x 10mm hole and are a very strong and sturdy bonnet rod holder. The clip takes an 8mm diameter bonnet rod. This de...

These clips fit in a square 10mm x 10mm hole and are a very strong and sturdy bonnet strut holder. The clip takes an 8mm diameter bonnet rod. This ...

This clip is fitted to some of the Vauxhall models that are made in partnership with Peugeot and Citroen. The clip is used to hold the bonnet stay ...

These yellow clips are fitted to the Ford Transit Connect and are used to keep the bonnet stay in position when the bonnet is closed and the stay i...

This yellow clip holds the bonnet rod safely out of the way when not in use. The clips can be easily damaged but are quick and easy to replace. If ...

This yellow clip holds the bonnet rod safely out of the way when not in use. The clips can be easily damaged but are quick and easy to replace. If ...

These are heavy duty and high quality parts typical of Honda. The chunky bonnet stay holder is used on a number of Honda vehicles including some mo...

This is the clip that the bonnet stay attaches to when not in use. They are easy broken and if not used, can result in rattles or the support rod b...

These small black plastic trim clips are used by SEAT to attach trim covers such as the top bonnet trim to the SEAT Leon Mk2.