Products

These plugs fit into holes in the bodywork or in plastic side skirt or sill trims. Each clip has a small rubber o-ring seal around the stem.

This part is used on a range of BMW vehicles. The clip is common on door cards, interior trim panels, boot linings and pillar covers.

Each of these clips come with a rubber washer pre-fitted. They are normally used by BMW to mount side skirts or sill moulding covers. They are used...

These yellow clips help locate and line up the plastic sill covers on several different BMW models. The clips ensure the trims fit tightly and line...

These are increasingly common on BMW models and are used as door card trim clips and other interior trim panel clips. Each clip includes the foam s...

The screw fit trim clips have an unusual hex head on the pin. They are fitted to some BMW models to retain the sill mouldings or side skirts. Other...

These are used on some 5-series and 6-series BMW cars to attach the side skirts or sill mouldings. BMW use several similar clips with different len...

These Torx headed bolts are used on the sideskirts or plastic sill covers fitted to some BMW models. There are different lengths depending on the m...

These clips are used to attach the lower door moulding strips onto the exterior of the F25 model BMW X3 (2010-2017). The clips are one of two types...

These white clips are used on the F25 BMW X3 (2010-2017). They are the plastic fasteners for the side moulding strips that run along the bottom of ...

These distinctive brown clips are used to attach the rubber weatherstrip seals onto the bodywork of the BMW E53 X5. They were also produced for BMW...

Widely used on BMW models, these spacers ensure that the sill mouldings or side skirts sit the correct distance from the metal bodywork. There are ...

These small white clips are used on several modern Renault cars to secure the exterior side moulding strips. These are the protective plastic strip...

These trim panel clips are used on early models of the Smart Fortwo. They are used on parts such as the boot lining panels. The original clips may ...

A standard push fit plastic rivet which fits into a 7.5mm hole. The wide 22mm collar means the part is suitable for many different uses. It is used...

These are widely used by General Motors and fitted to just one Vauxhall car that we know of. They are widely used on the Vauxhall Antara for bumper...

These short blue moulding clips are used on interior and exterior trim panels. The clips are used on several different models for parts such as pil...

These 6mm scrivets or screw fit plastic rivets have a Torx head and are used by Skoda on a number of different vehicles. The plastic clip is fitted...

Black metal body screw for Hyundai wheel arch liners and trim panels. This fastener is often used by Hyundai to fix front and rear wheel arch linin...

These steel screws are used to secure parts such as arch linings, splashguards, undertrays and other shields.

This part is used for attaching exterior body moulding trim to several Toyota vehicles. The Toyota part number is 75397-35010 or 75395-35070 (witho...

These white trim clips are used on models such as the W202 and W203 C-Class Mercedes. The clip is used to secure the plastic body mouldings on to t...

This M6 bolt is used to attach interior trim and linings on some SEAT models including the Arona and the Ibiza Mk5.

These small push fit plastic rivets are used to secure parts such as arch linings and windscreen cowls. The clip is push to fit but can be easily r...

A general purpose screw used on multiple Kia models for securing parts, trim and shields in position.

These high quality aftermarket parts are replacements for Fiat part number 60654116. These clips are normally used for securing trim panels such as...

These yellow trim clips are used to secure trim panels to the bodywork of the car. This part is mounted in the metal bodywork and a second part fit...

This plastic lock nut or expandable nut is extensively used by BMW. The part is used on most models since the 1990s and in a wide range of location...

These black metal screws are used on several Renault models. They are normally found securing parts such as bumpers, wheel arch linings, engine bay...

Small, white plastic trim clips used to attach trim and mouldings to the bodywork on several modern Vauxhall vehicles. Each of the parts we provide...

identical specifications and equal in quality to the OE Toyota parts, these clips are a fraction of the cost. The clips are used to attach fabric i...

A simple push button clip used to retain the bonnet insulation and sound deadening fabric panels fitted to the underside of the bonnet.

These clips are 30mm wide and used on some older VW models. The more modern cars and vans use a smaller clip.

These clips are very widely used across the modern Volvo range. The clip is used to secure the under bonnet insulation in position. The clips pinch...

These simple trim clips are normally used to attach upholstered or fabric panels in position. In particular they are used by Mercedes to fasten the...

These fasteners are used to secure the upholstered sound deadening fitted to the underside of the bonnet. The clips are squeezed together to fit an...

Bonnet insulation is the sheet of fabric that is often fitted to the underside of the bonnet. On many Citroen cars and vans, this clip is used to s...

These are used on many different Toyota models to attach bonnet insulations, upholstery and trims. The plastic trim clip has an overall diameter of...

These small plastic button clips are used to fasten the bonnet insulation sheet to the underside of the bonnet. The plastic clips can become brittl...

Black plastic bonnet insulation clip for Lexus vehicles, used to secure bonnet insulation and hood soundproofing to the bonnet.

Used to secure the fabric sound insulation that is fitted to the underside of the bonnet on some Citroen cars and vans.

These clips squeeze together and then expand when released to hold firm. The clips are used on many modern Land Rover and Range Rover models to sec...

These barbed clips secure the fabric insulation panel that is mounted to the underside of the bonnet on some Peugeot cars and vans.

These 28mm round clips are used to attach the bonnet or hood insulation on many different models produced by Nissan and Infiniti. They can be fitte...

This small plastic clip is used on several Land Rover models to secure the insulation to the underside of the bonnet.

These pinch clips expand when fitted to hold the noise insulation in position on the underside of the bonnet. They are used on several modern Ford ...