Products

These white clips normally come apart when removed or if the trim damaged. If so, the entire clip should be replaced. These are common on exterior ...

Typically used for arch linings or bumpers and for mounting other plastic trim parts onto the metal bodywork.

These are used on the old Audi 100 to mount plastic exterior trim mouldings.

A popular 8mm push pin rivet that is used on some Audi cars to attach splashguards, bumper covers and engine bay covers.

These are a distinctive expanding rivet used on the first Audi A3 to secure the top of the front bumper to the landing panel. There are four clips ...

This sprung clip is very simple. The clip squeezes together to be fitted and expands once it is in place. Most Audi vehicles use these to fasten bo...

These small white clips attach the ends of the door mechanism connecting rods that run between the various locks, handles and latches of the doors....

Very common across the modern Audi range, these distinctive clips actually push in to expand and clip into place. The short stem fits into an 8mm h...

These are large door card clips fitted to a few Audi models. The clips are distinctive and each one has an integrated rubber seal.

These are used by manufacturers in the VAG group including Porsche. They attach onto interior trim covers normally on the A, B or C pillars of the ...

This is a very common and very widely used clip. It's normally used on interior trims but can be for a very wide range of purposes. Door cards, pil...

These are one of several types and sizes of screw grommet fitted to most modern Audi cars. They are used for mounting anything from number plates t...

These clips fit into a retainer on the trim or door card. When the trim is then located and pushed onto the bodywork, these clips lock in place and...

These are used on a lot of Audi models. The parts are normally used as Audi undertray clips for attaching protective panels on the underside of the...

These star or Torx head screws are a suitable replacement for the parts used on many Audi cars to secure the front and rear wheel arch linings or s...

These large and distinctive expanding plastic rivets are used to secure the side skirt or sill cover mouldings onto the Toyota Avensis Mk3, The cli...

These black clips are used on older VW cars and vans. They are normally used to position badges on the bodywork. In some cases, the clips are also ...

These black blanking plugs or blind grommets are suitable for use on metal panels with a 2mm thickness. The plug is identical to Nissan part 80874-...

Black metal body screw used by Kia to secure wheel arch linings, mudguards, sill moulding trims, and rear bumper trim. The fastener is sold in sma...

These steel screws are used by Skoda the secure body trim and panels. They are used on the rear bumper bar of several Skoda models.

A standard black fir tree clip used by Nissan on several models. The clips are normally used for carpet lining, upholstery and trim panels in the i...

These plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the correct size hole ...

These plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the correct size hole ...

This is professional grade black insulation tape adhering to BS EN 60454-2. The tape is flame retardent, extremely flexible and with good adhesion....

These black plastic rivets fit into an 8.5mm hole and are perfect for VW and Ford van linings. The clips are long and suitable for thicker ply, ins...

This is an old style blanking plug used by Honda but suitable for many other purposes. Honda used them to blank off holes in the dashboard where so...

These are used on some older VW cars including some versions of the Golf, Jetta, Polo and Bora. The clip has a centre pin that pushes in to expand ...

These small, black plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the corre...

These plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the correct size hole ...

These plastic fir tree clips are perfect for holding panels or trims in place. The large diameter head is perfect for holding loose fitting panels ...

Self tapping POLYTOPS® screws, are popularly used in different applications, but particularly in securing vehicle numberplates. The coloured polyme...

Self tapping POLYTOPS® screws, are popularly used in different applications, but particularly in securing vehicle numberplates. The coloured polyme...

These clips are used on a wide range of VW cars and vans. The clips are distinctive because of the allen key head which gives the clips an industri...

These screws are common on Toyota cars and vans. The screws are often used on the wheel arch linings or splashguards. The screws have a captive was...

Self tapping POLYTOPS® screws, are popularly used in different applications, but particularly in securing vehicle numberplates. The coloured polyme...

Self tapping POLYTOPS® screws, are popularly used in different applications, but particularly in securing vehicle numberplates. The coloured polyme...

These panel clips are used on some BMW cars to secure interior trim panels and covers. The clips fit into an 8mm hole in the bodywork and secure pa...

Distinctive blue screw grommets or lokut nuts used to attach panels or parts in place on the bodywork. This part is used by Fiat on several cars. U...

These blue trim clips are used on exterior plastic mouldings such as wheel arch flare trims and side moulding strips. Each of the clips includes a ...

These are a spacer used to set the side skirt or sill trims off from the metal sill. They are used with a threaded bolt. Different models use diffe...

These are used on some of the older 3-Series and 5-Series BMW models such as the E36 and E39. They are a standard 5mm push pin plastic rivet. They ...

Widely used across the BMW range, these are very simple push pin plastic rivets that fit into an 8mm hole. BMW use them often on upholstery and car...

Fitted on several models, these are typically used on larger trim panels or upholstery such as bumpers, side skirts and boot linings. The clip is a...