Products

These are standard screw grommets used for mounting trims and parts into position on the bodywork. These fit into a 10mm x 10mm square hole in the ...

Each fitted with a rubber grommet, these clips are perfect, high quality replacement to the OE parts. The clips are used to attach the plastic moul...

these brackets fit onto the sills of various models and allow the side skirts and sill trims to be positioned correctly. They are not used on all m...

Our reflectors are produced in Austria by one of Europe's biggest brands. They are all road legal and E-Approved. This means they are suitable for ...

Our reflectors are produced in Austria by one of Europe's biggest brands. They are all road legal and E-Approved. This means they are suitable for ...

These plastic clips are used to attach rubber weatherstrip seals around apertures on the vehicle. The large head of the clip fits into a hole in th...

These plastic clips are used to attach rubber weatherstrip seals around apertures on the vehicle. The large head of the clip fits into a hole in th...

These plastic clips are used to attach rubber weatherstrip seals around apertures on the vehicle. The large head of the clip fits into a hole in th...

These plastic clips are used to attach rubber weatherstrip seals around apertures on the vehicle. The large head of the clip fits into a hole in th...

These 6mm blind rivets are used on some BMW models which are fitted with white body-coloured trim mouldings. The clip is normally fitted to parts s...

These small white screw grommets fit into a square hole measuring 7.1mm x 7.1mm. The clips are used by Fiat on many of their cars and vans. Typica...

Small screw grommets used for mounting trim panels and parts onto metal bodywork. These little clips fit into a 7mm square hole and are used by VW ...

These fir tree clips are for mounting interior trim panels such as door cards. The head twists into the mounting point on the panel allowing the cl...

These fir tree clips are for mounting interior trim panels such as door cards. The head twists into the mounting point on the panel allowing the cl...

Standard lock nuts or screw grommets used for mounting parts or trim to metal bodywork. These clips push into a square 8.5mm hole in the bodywork. ...

Our reflectors are produced in Austria by one of Europe's biggest brands. They are all road legal and E-Approved. This means they are suitable for ...

These small, white screw grommets are used around the vehicle for fastening trim panels and parts to the bodywork. The grommet fits into the bodywo...

Locking nuts are used to join parts using the locking nut and a screw. The locking nut will sit in a hole within the bodywork such as a corner of t...

These white screw grommets fit into a 9.5mm square hole. They are used on several different Land Rover models and are typically used on exterior tr...

These are used to mount the bumpers on several Mitsubishi models. This part fits into a hole in the metal bodywork and the plastic bumper cover is ...

These plastic lock nuts, lokuts or screw grommets fit into a square 9mm x 9mm hole. Each one includes a foam sealing washer. They are identical to ...

These small white clips are used to attach the interior A-pillar trim. This is the plastic trim that runs down the interior of the car between the ...

These white clips normally come apart when removed or if the trim damaged. If so, the entire clip should be replaced. These are common on exterior ...

Typically used for arch linings or bumpers and for mounting other plastic trim parts onto the metal bodywork.

These are used on the old Audi 100 to mount plastic exterior trim mouldings.

These small white clips attach the ends of the door mechanism connecting rods that run between the various locks, handles and latches of the doors....

These are used by manufacturers in the VAG group including Porsche. They attach onto interior trim covers normally on the A, B or C pillars of the ...

These small clips are used to attach the door sill trims or scuff plates. These trims are fitted in the door opening and are often marked with the ...

These clips are one of several used to hold the various sizes and styles of side moulding bumpstrips to the vehicles. These styling strips are moun...

This kit contains the two plastic headlight adjuster mountings which often break within the E39's headlights. BMW do not sell these parts separatel...

These little white trim clips are used to attach the roof mouldings. These are long, plastic trims that run the length of the rain channels on the ...

Each of these clips come with a rubber washer pre-fitted. They are normally used by BMW to mount side skirts or sill moulding covers. They are used...

These are increasingly common on BMW models and are used as door card trim clips and other interior trim panel clips. Each clip includes the foam s...

These clips are used to attach the lower door moulding strips onto the exterior of the F25 model BMW X3 (2010-2017). The clips are one of two types...

These white clips are used on the F25 BMW X3 (2010-2017). They are the plastic fasteners for the side moulding strips that run along the bottom of ...

These small white clips are used on several modern Renault cars to secure the exterior side moulding strips. These are the protective plastic strip...

These white trim clips are used on models such as the W202 and W203 C-Class Mercedes. The clip is used to secure the plastic body mouldings on to t...

This plastic lock nut or expandable nut is extensively used by BMW. The part is used on most models since the 1990s and in a wide range of location...

Small, white plastic trim clips used to attach trim and mouldings to the bodywork on several modern Vauxhall vehicles. Each of the parts we provide...

This is a common size of bonnet stay holder used on a number of Toyota cars. The plastic clip fits into a hole on or next to the landing / slam pan...

These distinctive white fasteners are used on the bumper corners to align and fasten the bumper in position.

These white plastic trim clips are used on several older VW vehicles such as the classic Beetle, Mk1 Golf and Type 25. The clips are used to attach...

These clips are normally fitted on the bodywork to position and secure the bumper corners. Each clip includes a foam sealing washer. The parts are ...

This unique round headed clip is used on several models including some versions of MX-5, the Ford Maverick and the Mazda MPV. The clip fastens into...

This part is used to align and mount the bumper on several Kia models.

These white fasteners are used to secure the bumper alignment. They can often be snapped in a collision or become brittle as they age. They are an ...